Hi everybody.
First things first:
Mainboard: Supermicro X10SLL-F-O Socket 1150 (with ECC)
Memory: 8GB Samsung M391B1G73QH0-YK0 (ECC)
CPU: Intel Core i3 4130 2x3,5 Ghz Socket 1150 (with ECC and AES)
In the BIOS I set legacy USB support.
Did a fresh embedded installation of NAS4Free-x64-LiveUSB-9.2.0.1.972 using a live usb stick onto another USB stick.
Of course I removed the live USB stick before the next boot. No changes are made to the system since installation.
The system is up and running.
But each time I reboot the system, I receive an error message:
Fatal error! The device that contains the configuration file (config.xml) could not be found. NAS4Free cannot continue booting.
When I shut the machine down and do a cold start, the system will come up without any issues.
Does anybody have an idea where the problem could be located?
The system is unusable to me in this condition.
Thanks in advance.
EDIT: Just to make sure I tried different USB sticks, Intenso and Sandisk. But it's no difference.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
device containing config.xml could not be found
-
Loki
- Starter
- Posts: 20
- Joined: 03 Aug 2014 13:48
- Location: Bonn, Germany
- Status: Offline
device containing config.xml could not be found
Last edited by Loki on 13 Aug 2014 21:49, edited 1 time in total.
NAS4Free 11.1.0.4 - Atomics (Revision 4812) embedded, file system: ZFS, raidz1, 3 pools à 3 disks, services: SMB, SSH
Supermicro X10SLL-F-O Socket 1150, ECC RAM: 8GB Samsung M391B1G73QH0-YK0, CPU: Intel Core i3 4130, Case: Fractal Design NODE 804, Disks: 9 Western Digital, Boot device: Intenso USB pen drive, Controller: Dell Perc H310 (flashed to IT mode)
Supermicro X10SLL-F-O Socket 1150, ECC RAM: 8GB Samsung M391B1G73QH0-YK0, CPU: Intel Core i3 4130, Case: Fractal Design NODE 804, Disks: 9 Western Digital, Boot device: Intenso USB pen drive, Controller: Dell Perc H310 (flashed to IT mode)
-
armandh
- Advanced User
- Posts: 398
- Joined: 23 Jun 2012 04:15
- Location: St Louis County Missouri USA
- Status: Offline
Re: device containing config.xml could not be found
likely hanging over some USB conflict
try the usb boot medium in other usb ports
or
avoid USB all together with one of these
http://www.logicsupply.com/components/s ... vhsd001g0/
try the usb boot medium in other usb ports
or
avoid USB all together with one of these
http://www.logicsupply.com/components/s ... vhsd001g0/
4 thread 3300 Mhz Intel i3, 1 TB ZFS mirror, available RAM 7.823 Gb, 64 bit NAS4Free 9.1.0.1 rev 573 [88 watts, 48 Mbps]
2 thread 1600 Mhz atom/ion, 1 TB ZFS mirror, available RAM 3.083 Gb, 64 bit NAS4Free-9.1.0.1 rev 573 [27 watts, 35 Mbps]
2 thread 3900 Mhz AMD A6-6400K, 2 TB ZFS Mirror, available RAM 7.557 Gb, 64 bit Nas4Free 9.3.0.2.1771 [89 watts, 68 Mbps]
2 thread 1600 Mhz atom/ion, 1 TB ZFS mirror, available RAM 3.083 Gb, 64 bit NAS4Free-9.1.0.1 rev 573 [27 watts, 35 Mbps]
2 thread 3900 Mhz AMD A6-6400K, 2 TB ZFS Mirror, available RAM 7.557 Gb, 64 bit Nas4Free 9.3.0.2.1771 [89 watts, 68 Mbps]
-
Loki
- Starter
- Posts: 20
- Joined: 03 Aug 2014 13:48
- Location: Bonn, Germany
- Status: Offline
Re: device containing config.xml could not be found
Recently I found this thread: viewtopic.php?f=78&t=6247&p=41456#p41456
It seems to be a bug of Nas4Free version 9.2.0.1.
Hopefully it will be fixed in a coming version.
Hardware issues can be excluded in my opinion because other software will boot flawlessly using the same hardware configuration.
It seems to be a bug of Nas4Free version 9.2.0.1.
Hopefully it will be fixed in a coming version.
Hardware issues can be excluded in my opinion because other software will boot flawlessly using the same hardware configuration.
NAS4Free 11.1.0.4 - Atomics (Revision 4812) embedded, file system: ZFS, raidz1, 3 pools à 3 disks, services: SMB, SSH
Supermicro X10SLL-F-O Socket 1150, ECC RAM: 8GB Samsung M391B1G73QH0-YK0, CPU: Intel Core i3 4130, Case: Fractal Design NODE 804, Disks: 9 Western Digital, Boot device: Intenso USB pen drive, Controller: Dell Perc H310 (flashed to IT mode)
Supermicro X10SLL-F-O Socket 1150, ECC RAM: 8GB Samsung M391B1G73QH0-YK0, CPU: Intel Core i3 4130, Case: Fractal Design NODE 804, Disks: 9 Western Digital, Boot device: Intenso USB pen drive, Controller: Dell Perc H310 (flashed to IT mode)