I noticed this behaviour while installing NAS4Free on my IBM eServer x345. I have a ps/2 keyboard and a USB mouse plugged into the system. I can go into the HW setup/diagnostics and the ps/2 keyboard works just fine. I boot NAS4Free from CD, and at the initial screen the ps/2 keyboard stops working. I can plug a USB keyboard in at this point, and that works.
Any ideas on why this is happening?
cheers
al
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
PS/2 Keyboard and install of NAS4Free
-
azd30
- NewUser
- Posts: 1
- Joined: 19 Nov 2014 01:55
- Status: Offline
-
alexey123
- Moderator
- Posts: 1469
- Joined: 19 Aug 2012 08:22
- Location: Israel, Karmiel
- Contact:
- Status: Offline
Re: PS/2 Keyboard and install of NAS4Free
Do you have Intel original keyboard from list? http://www-03.ibm.com/systems/info/x86s ... /x345.html
Home12.1.0.4 - Ingva (revision 7091)/ x64-embedded on AMD A8-7600 Radeon R7 A88XM-PLUS/ 16G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600