Festplatten zu langsam
Posted: 22 Aug 2013 20:22
Moin Moin,
ich hab vor paar Tagen mein NAS neu aufgesetzt. Nun hab ich mit Geschwindigkeitsprobleme meine Platten zu kämpfen. Sie liegt so bei 35mb. Sonst war ich locker bei 80-90mb. Habe 2 Platten als ZFS laufen. Hier paar Infos zu den Platten:
Benchmark unter putty :
Vielleicht hat ja jemand eine idee
Grüße
Lars
ich hab vor paar Tagen mein NAS neu aufgesetzt. Nun hab ich mit Geschwindigkeitsprobleme meine Platten zu kämpfen. Sie liegt so bei 35mb. Sonst war ich locker bei 80-90mb. Habe 2 Platten als ZFS laufen. Hier paar Infos zu den Platten:
Code: Select all
******* Working on device /dev/ada0 *******
parameters extracted from in-core disklabel are:
cylinders=5814021 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=5814021 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 1565565057 (764436 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 755/ head 15/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>Code: Select all
****** Working on device /dev/ada1 *******
parameters extracted from in-core disklabel are:
cylinders=5814021 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=5814021 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 1565565057 (764436 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 755/ head 15/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>Code: Select all
16301+0 records in
16301+0 records out
33384448000 bytes transferred in 173.934728 secs (191936644 bytes/sec)
0.125u 64.946s 3:00.32 36.0% 25+2757k 1038+28527io 0pf+0w
Code: Select all
16301+0 records in
16301+0 records out
33384448000 bytes transferred in 146.003344 secs (228655365 bytes/sec)
0.094u 34.757s 2:26.00 23.8% 25+2734k 256259+0io 0pf+0w
Vielleicht hat ja jemand eine idee
Grüße
Lars