This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Hilfe was bedeutet das?

German community

Moderators: b0ssman, apollo567, Princo, crowi

Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
User avatar
seller
Advanced User
Advanced User
Posts: 273
Joined: 07 Apr 2013 13:22
Location: DE/ RLP
Status: Offline

Hilfe was bedeutet das?

Post by seller »

Hilfe was geht hier ab, das NAS ist pötzlich extrem zäh und kopieren dauert ewig.....
LOG-DATEI

Code: Select all

Datum & Zeit 	                 Benutzer 	                         Ereignis
Jul 19 16:57:23 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Error 5, Retries exhausted
Jul 19 16:57:23 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 c8 73 4d 59 59 00 00 58 00
Jul 19 16:57:23 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:57:23 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:57:23 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 c8 73 4d 40 59 00 00 00 58 00
Jul 19 16:57:18 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:57:18 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 c8 73 4d 59 59 00 00 58 00
Jul 19 16:57:18 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:57:18 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:57:18 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 c8 73 4d 40 59 00 00 00 58 00
Jul 19 16:57:14 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:57:14 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 c8 73 4d 59 59 00 00 58 00
Jul 19 16:57:14 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:57:14 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:57:14 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 c8 73 4d 40 59 00 00 00 58 00
Jul 19 16:57:06 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:57:06 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 c8 73 4d 59 59 00 00 58 00
Jul 19 16:57:06 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:57:06 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:57:06 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 c8 73 4d 40 59 00 00 00 58 00
Jul 19 16:57:02 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:57:02 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 c8 73 4d 59 59 00 00 58 00
Jul 19 16:57:02 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:57:02 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:57:02 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 c8 73 4d 40 59 00 00 00 58 00
Jul 19 16:54:29 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Error 5, Retries exhausted
Jul 19 16:54:29 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a8 d2 de 65 65 00 00 08 00
Jul 19 16:54:29 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:54:29 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:54:29 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a8 d2 de 40 65 00 00 00 08 00
Jul 19 16:54:25 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:54:25 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a8 d2 de 65 65 00 00 08 00
Jul 19 16:54:25 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:54:25 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:54:25 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a8 d2 de 40 65 00 00 00 08 00
Jul 19 16:54:21 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:54:21 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a8 d2 de 65 65 00 00 08 00
Jul 19 16:54:21 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:54:21 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:54:21 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a8 d2 de 40 65 00 00 00 08 00
Jul 19 16:54:18 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:54:18 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a8 d2 de 65 65 00 00 08 00
Jul 19 16:54:18 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:54:18 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:54:18 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a8 d2 de 40 65 00 00 00 08 00
Jul 19 16:54:14 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:54:14 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a8 d2 de 65 65 00 00 08 00
Jul 19 16:54:14 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:54:14 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:54:14 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a8 d2 de 40 65 00 00 00 08 00
Jul 19 16:50:50 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Error 5, Retries exhausted
Jul 19 16:50:50 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a8 92 4c 59 59 00 00 08 00
Jul 19 16:50:50 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:50 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:50 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a8 92 4c 40 59 00 00 00 08 00
Jul 19 16:50:46 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:50:46 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a8 92 4c 59 59 00 00 08 00
Jul 19 16:50:46 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:46 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:46 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a8 92 4c 40 59 00 00 00 08 00
Jul 19 16:50:42 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:50:42 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a8 92 4c 59 59 00 00 08 00
Jul 19 16:50:42 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:42 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:42 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a8 92 4c 40 59 00 00 00 08 00
Jul 19 16:50:38 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:50:38 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a8 92 4c 59 59 00 00 08 00
Jul 19 16:50:38 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:38 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:38 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a8 92 4c 40 59 00 00 00 08 00
Jul 19 16:50:35 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:50:35 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a8 92 4c 59 59 00 00 08 00
Jul 19 16:50:35 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:35 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:35 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a8 92 4c 40 59 00 00 00 08 00
Jul 19 16:50:31 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Error 5, Retries exhausted
Jul 19 16:50:31 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a0 92 4c 59 59 00 00 08 00
Jul 19 16:50:31 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:31 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:31 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a0 92 4c 40 59 00 00 00 08 00
Jul 19 16:50:27 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:50:27 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a0 92 4c 59 59 00 00 08 00
Jul 19 16:50:27 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:27 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:27 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a0 92 4c 40 59 00 00 00 08 00
Jul 19 16:50:23 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:50:23 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a0 92 4c 59 59 00 00 08 00
Jul 19 16:50:23 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:23 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:23 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a0 92 4c 40 59 00 00 00 08 00
Jul 19 16:50:19 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:50:19 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a0 92 4c 59 59 00 00 08 00
Jul 19 16:50:19 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:19 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:19 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a0 92 4c 40 59 00 00 00 08 00
Jul 19 16:50:15 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:50:15 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 a0 92 4c 59 59 00 00 08 00
Jul 19 16:50:15 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:15 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:15 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 a0 92 4c 40 59 00 00 00 08 00
Jul 19 16:50:11 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:50:11 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 98 92 4c 59 59 00 00 08 00
Jul 19 16:50:11 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:50:11 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:50:11 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 98 92 4c 40 59 00 00 00 08 00
Jul 19 16:49:15 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:49:15 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 68 6b e2 58 58 00 00 08 00
Jul 19 16:49:15 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:49:15 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:49:15 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 68 6b e2 40 58 00 00 00 08 00
Jul 19 16:49:11 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:49:11 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 68 6b e2 58 58 00 00 08 00
Jul 19 16:49:11 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:49:11 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:49:11 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 68 6b e2 40 58 00 00 00 08 00
Jul 19 16:49:07 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:49:07 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 68 6b e2 58 58 00 00 08 00
Jul 19 16:49:07 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:49:07 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:49:07 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 68 6b e2 40 58 00 00 00 08 00
Jul 19 16:47:41 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Error 5, Retries exhausted
Jul 19 16:47:41 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 90 cf 20 6a 6a 00 00 08 00
Jul 19 16:47:41 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:47:41 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:47:41 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 90 cf 20 40 6a 00 00 00 08 00
Jul 19 16:47:37 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:47:37 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 90 cf 20 6a 6a 00 00 08 00
Jul 19 16:47:37 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:47:37 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:47:37 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 90 cf 20 40 6a 00 00 00 08 00
Jul 19 16:47:34 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:47:34 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 90 cf 20 6a 6a 00 00 08 00
Jul 19 16:47:34 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:47:34 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:47:34 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 90 cf 20 40 6a 00 00 00 08 00
Jul 19 16:47:30 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:47:30 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 90 cf 20 6a 6a 00 00 08 00
Jul 19 16:47:30 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:47:30 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:47:30 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 90 cf 20 40 6a 00 00 00 08 00
Jul 19 16:47:26 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Retrying command
Jul 19 16:47:26 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 90 cf 20 6a 6a 00 00 08 00
Jul 19 16:47:26 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:47:26 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:47:26 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 90 cf 20 40 6a 00 00 00 08 00
Jul 19 16:47:22 	nas4free-2 	kernel: (ada2:ata3:0:1:0): Error 5, Retries exhausted
Jul 19 16:47:22 	nas4free-2 	kernel: (ada2:ata3:0:1:0): RES: 51 40 10 ce 20 6a 6a 00 00 08 00
Jul 19 16:47:22 	nas4free-2 	kernel: (ada2:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Jul 19 16:47:22 	nas4free-2 	kernel: (ada2:ata3:0:1:0): CAM status: ATA Status Error
Jul 19 16:47:22 	nas4free-2 	kernel: (ada2:ata3:0:1:0): READ_DMA48. ACB: 25 00 10 ce 20 40 6a 00 00 00 08 00
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
Top
User avatar
Princo
Forum Moderator
Forum Moderator
Posts: 1080
Joined: 15 Jul 2012 01:21
Location: Berlin, Germany
Status: Offline

Re: Hilfe was bedeutet das?

Post by Princo »

Dein System hat den ganzen Speicher genutzt,
müsste jetzt dringend swappen,
kann nicht swappen,
weil du kein Swap-Device eingerichtet hast.

Daher fängt das System an, eigenständig Prozesse zu killen,
und dazu gehört leider auch der ZFS-Prozeß.

Abhilfe: Swap-Gerät einrichten.
Mehr RAM hilft an dieser Stelle kaum.

Grüße
Princo
Meine Antworten beziehen sich immer auf die englischsprachige GUI. ECC-RAM ist Pflicht beim Einsatz von ZFS.
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Hilfe was bedeutet das?

Post by b0ssman »

Poste auch mal deine smart Werte aller Platten.


Sent from my iPhone using Tapatalk
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
User avatar
seller
Advanced User
Advanced User
Posts: 273
Joined: 07 Apr 2013 13:22
Location: DE/ RLP
Status: Offline

Re: Hilfe was bedeutet das?

Post by seller »

@ bossman
meinst Du das ?

System zur Selbstüberwachung, Analyse und Statusmeldung Freigeben
Überprüfungsintervall
Setzt das Interval der Überprüfungen auf N Sekunden. Der erlaubte Minimalwert ist 10.
Expertenmodus

Nie - Das Gerät wird immer überprüft, unabhängig vom Energiesparzustand. Eine abgeschaltete Festplatte wird dann für die Überprüfung hochgefahren.
Sleep - Überprüfe das Gerät es sei denn es befindet sich im SLEEP Modus.
Bereitsschaftmodus - die Einheit überprüfen, solange diese sich nicht im Ruhe- oder Bereitschaftsmodus befindet. In diesen Modi drehen die Laufwerke nicht, wenn Sie also sicherstellen wollen, dass bei einem Mobilrechner die Festplatten bei jeden Zugriff hochdrehen, dann ist das wahrscheinlich dies, was Sie haben wollen.
Idle - Überprüfe das Gerät außer es ist im SLEEP, STANDBY, oder IDLE Modus. Im IDLE Zustand laufen viele Festplatten weiter was eventuell unerwünscht ist.

Temperaturüberwachung
Differenz °C
Benachrichtigen, falls sich die Temperatur um mindestens N Grad Celsius seit der letzen Benachrichtigung verändert hat. Auf 0 setzen zum Deaktivieren dieser Benachrichtigung.
Zur Information °C
Melden wenn die Termperatur N °C erreicht oder überschreitet. 0 unterbindet die Meldung.
Kritisch °C
Melden wenn die Termperatur N °C erreicht oder überschreitet. 0 unterbindet die Meldung.
Geplante Selbst-Tests
Geplante Selbst-Tests
Festplatte Typ Beschreibung
/dev/ada4 Short Self-Test Selbsttest bearbeiten Selbsttest löschen
/dev/ada3 Short Self-Test Selbsttest bearbeiten Selbsttest löschen
/dev/ada2 Short Self-Test Selbsttest bearbeiten Selbsttest löschen
/dev/ada1 Short Self-Test Selbsttest bearbeiten Selbsttest löschen
Selbsttest hinzufügen Alle Selbsttests löschen
Zusätzliche planmäßige Selbsttests hinzufügen.
E-Mail Bericht Aktivieren
An E-Mail-Adresse
E-Mail Adresse des Empfängers. Semikolon getrennte Liste von E-Mail Adressen.
Test E-Mail Sende eine TEST-Warnung als E-Mail nach dem Start.
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Hilfe was bedeutet das?

Post by b0ssman »

nein ich meine die infos aus

Diagnostics|Information|S.M.A.R.T.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
User avatar
seller
Advanced User
Advanced User
Posts: 273
Joined: 07 Apr 2013 13:22
Location: DE/ RLP
Status: Offline

Re: Hilfe was bedeutet das?

Post by seller »

@bossMan

hier....

Code: Select all

Gerät /dev/ada0 - SAMSUNG HD203WI 1AN10003

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F3 EG
Device Model:     SAMSUNG HD203WI
Serial Number:    S2ACJ1AZ800553
LU WWN Device Id: 5 0024e9 003ed6ac6
Firmware Version: 1AN10003
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Mon Jul 20 17:47:59 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		(25800) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 430) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       11
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   060   058   025    Pre-fail  Always       -       12344
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       280
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       33041
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       343
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       283
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   063   057   000    Old_age   Always       -       37 (Min/Max 16/43)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       487
223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count        0x0032   086   086   000    Old_age   Always       -       146534

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Gerät /dev/ada1 - SAMSUNG HD203WI 1AN10003

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F3 EG
Device Model:     SAMSUNG HD203WI
Serial Number:    S2ACJ1AZ800550
LU WWN Device Id: 5 0024e9 003ed688e
Firmware Version: 1AN10003
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Mon Jul 20 17:48:01 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		(25260) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 421) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       1
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   060   057   025    Pre-fail  Always       -       12374
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       290
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       33036
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       338
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       846
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   056   000    Old_age   Always       -       34 (Min/Max 17/44)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   001   001   000    Old_age   Always       -       572977
223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count        0x0032   086   086   000    Old_age   Always       -       144738

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Gerät /dev/ada2 - TOSHIBA DT01ACA200 MX4OABB0

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" HDD DT01ACA...
Device Model:     TOSHIBA DT01ACA200
Serial Number:    13B453MAS
LU WWN Device Id: 5 000039 ff3c1e4b1
Firmware Version: MX4OABB0
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Jul 20 17:48:02 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		(15969) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 267) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   086   086   016    Pre-fail  Always       -       7208960
  2 Throughput_Performance  0x0005   138   138   054    Pre-fail  Offline      -       76
  3 Spin_Up_Time            0x0007   127   127   024    Pre-fail  Always       -       298 (Average 298)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       224
  5 Reallocated_Sector_Ct   0x0033   001   001   005    Pre-fail  Always   FAILING_NOW 1648
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   124   124   020    Pre-fail  Offline      -       33
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       16121
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       224
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       735
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       735
194 Temperature_Celsius     0x0002   146   146   000    Old_age   Always       -       41 (Min/Max 19/44)
196 Reallocated_Event_Count 0x0032   001   001   000    Old_age   Always       -       2947
197 Current_Pending_Sector  0x0022   001   001   000    Old_age   Always       -       5992
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       31
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 817 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 817 occurred at disk power-on lifetime: 16121 hours (671 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 40 a2 dc 09  Error: UNC 8 sectors at LBA = 0x09dca240 = 165454400

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 40 a2 dc 40 00   1d+07:45:46.475  READ DMA EXT
  25 00 08 40 a2 dc 40 00   1d+07:45:42.956  READ DMA EXT
  25 00 08 40 a2 dc 40 00   1d+07:45:39.246  READ DMA EXT
  25 00 08 40 a2 dc 40 00   1d+07:45:35.553  READ DMA EXT
  25 00 08 40 a2 dc 40 00   1d+07:45:32.214  READ DMA EXT

Error 816 occurred at disk power-on lifetime: 16121 hours (671 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 40 a2 dc 09  Error: UNC 8 sectors at LBA = 0x09dca240 = 165454400

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 40 a2 dc 40 00   1d+07:45:42.956  READ DMA EXT
  25 00 08 40 a2 dc 40 00   1d+07:45:39.246  READ DMA EXT
  25 00 08 40 a2 dc 40 00   1d+07:45:35.553  READ DMA EXT
  25 00 08 40 a2 dc 40 00   1d+07:45:32.214  READ DMA EXT
  ea 00 00 00 00 00 40 00   1d+07:21:28.778  FLUSH CACHE EXT

Error 815 occurred at disk power-on lifetime: 16121 hours (671 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 40 a2 dc 09  Error: UNC 8 sectors at LBA = 0x09dca240 = 165454400

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 40 a2 dc 40 00   1d+07:45:39.246  READ DMA EXT
  25 00 08 40 a2 dc 40 00   1d+07:45:35.553  READ DMA EXT
  25 00 08 40 a2 dc 40 00   1d+07:45:32.214  READ DMA EXT
  ea 00 00 00 00 00 40 00   1d+07:21:28.778  FLUSH CACHE EXT
  35 00 08 28 87 e0 40 00   1d+07:21:28.744  WRITE DMA EXT

Error 814 occurred at disk power-on lifetime: 16121 hours (671 days + 17 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 40 a2 dc 09  Error: UNC 8 sectors at LBA = 0x09dca240 = 165454400

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 40 a2 dc 40 00   1d+07:45:35.553  READ DMA EXT
  25 00 08 40 a2 dc 40 00   1d+07:45:32.214  READ DMA EXT
  ea 00 00 00 00 00 40 00   1d+07:21:28.778  FLUSH CACHE EXT
  35 00 08 28 87 e0 40 00   1d+07:21:28.744  WRITE DMA EXT
  35 00 08 28 85 e0 40 00   1d+07:21:28.717  WRITE DMA EXT

Error 813 occurred at disk power-on lifetime: 16121 hours (671 days + 17 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 40 a2 dc 09  Error: UNC 8 sectors at LBA = 0x09dca240 = 165454400

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 40 a2 dc 40 00   1d+07:45:32.214  READ DMA EXT
  ea 00 00 00 00 00 40 00   1d+07:21:28.778  FLUSH CACHE EXT
  35 00 08 28 87 e0 40 00   1d+07:21:28.744  WRITE DMA EXT
  35 00 08 28 85 e0 40 00   1d+07:21:28.717  WRITE DMA EXT
  ca 00 08 28 03 00 e0 00   1d+07:21:28.716  WRITE DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Gerät /dev/ada3 - TOSHIBA DT01ACA200 MX4OABB0

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" HDD DT01ACA...
Device Model:     TOSHIBA DT01ACA200
Serial Number:    13B9ARBGS
LU WWN Device Id: 5 000039 ff3c43f96
Firmware Version: MX4OABB0
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Jul 20 17:48:03 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		(15300) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 255) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   139   139   054    Pre-fail  Offline      -       71
  3 Spin_Up_Time            0x0007   131   131   024    Pre-fail  Always       -       290 (Average 290)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       223
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   126   126   020    Pre-fail  Offline      -       32
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       16123
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       223
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       741
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       741
194 Temperature_Celsius     0x0002   166   166   000    Old_age   Always       -       36 (Min/Max 20/43)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Gerät /dev/da0 - USB2.0 FlashDisk 0.00

/dev/da0: Unknown USB bridge [0x1307:0x0165 (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary
Gruß
Seller
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Hilfe was bedeutet das?

Post by b0ssman »

ada ist fast tot. die platte musst du SOFORT ersetzen
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
User avatar
seller
Advanced User
Advanced User
Posts: 273
Joined: 07 Apr 2013 13:22
Location: DE/ RLP
Status: Offline

Re: Hilfe was bedeutet das?

Post by seller »

Hallo BossMan,
UUUIIII!!!! jetzt bin ich etwas geschockt, vor ein zwei Wochen noch nen SCrub gemacht und da war alles noch ok .
ist es die ADA0 die stirbt?
was kann ich wie tun?
klar als erstes mal ne neue Platte her,ist bestellt.
und dann wohl am besten das Nas ausschalten und ruhen lassen bis die Platte das ist oder?
Kannst Du mir sagen wie ich die Hardware identifiziere, die die Grätsche macht, Du verstehst was ich meine?

Gruß Seller
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Hilfe was bedeutet das?

Post by b0ssman »

ada2
1 Raw_Read_Error_Rate 0x000b 086 086 016 Pre-fail Always - 7208960
5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always FAILING_NOW 1648
196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 2947
197 Current_Pending_Sector 0x0022 001 001 000 Old_age Always - 5992
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 31
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
User avatar
seller
Advanced User
Advanced User
Posts: 273
Joined: 07 Apr 2013 13:22
Location: DE/ RLP
Status: Offline

Re: Hilfe was bedeutet das?

Post by seller »

was meinst Du soll ich abschalten oder ?
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
Top
User avatar
crowi
Forum Moderator
Forum Moderator
Posts: 1176
Joined: 21 Feb 2013 16:18
Location: Munich, Germany
Status: Offline

Re: Hilfe was bedeutet das?

Post by crowi »

kommt darauf an wie Du Dein System aufgesetzt (RAID / RAIDZx etc) hast und wie aktuell Deine Backups sind. Am besten abschalten, neue Platte rein und RAID oder Pool wiederherstellen.
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
Top
User avatar
seller
Advanced User
Advanced User
Posts: 273
Joined: 07 Apr 2013 13:22
Location: DE/ RLP
Status: Offline

Re: Hilfe was bedeutet das?

Post by seller »

hi Bossmann
ich habe alle Daten doppelt, das Nas ist meine Datensicherung der Arbeitstiere und zweier Laptops

ist das die gewünschte Info ?
NAS_raidz1_0 raidz1 NAS /dev/ada1, /dev/ada0, /dev/ada2, /dev/ada3
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Hilfe was bedeutet das?

Post by b0ssman »

wenn du derzeit keine platte zum wechseln hast schalte den server ab
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
User avatar
seller
Advanced User
Advanced User
Posts: 273
Joined: 07 Apr 2013 13:22
Location: DE/ RLP
Status: Offline

Re: Hilfe was bedeutet das?

Post by seller »

so NAS ist aus, warte auf die Festplatte, melde mich bei Eintreffen (spätesten 24.07.)wieder.
Erstmal vielen Dank für die schnelle Hilfe.
Gruß
Seller
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
Top
User avatar
Princo
Forum Moderator
Forum Moderator
Posts: 1080
Joined: 15 Jul 2012 01:21
Location: Berlin, Germany
Status: Offline

Re: Hilfe was bedeutet das?

Post by Princo »

Hallo seller,

Entschuldige bitte meine falsche Fehlerdiagnose. Ich war steif und fest der Überzeugung, daß bei deiner Log-Datei verschiedene ada's gemeldet wurden, und das brachte mich auf das typische Swap-Problem.

Zum Glück hatte b0ssman den richtigen Riecher :geek:

Grüße
Princo
Meine Antworten beziehen sich immer auf die englischsprachige GUI. ECC-RAM ist Pflicht beim Einsatz von ZFS.
Top
User avatar
seller
Advanced User
Advanced User
Posts: 273
Joined: 07 Apr 2013 13:22
Location: DE/ RLP
Status: Offline

Re: Hilfe was bedeutet das?

Post by seller »

Hallo Princo,
kein Grund für ne Entschuldigung....
Hauptsache der Fehler ist gefunden.
Und mit eurer Hilfe schaffe ich auch den Plattentausch.

Bis die Tage
Gruß
Seller
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
Top
Post Reply

Return to “Deutsch”