Hi zusammen,
wie im vorherigen Threat von mir zu lesen stirbt eine meiner vier Platten, ne neue habe ich jetzt.
wie tausche ich die Platte?
was muss ich vorbereiten?
helft ihr mir bitte.
gruß
Seller
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Platte wechseln wie
Moderators: b0ssman, apollo567, Princo, crowi
-
seller
- Advanced User
- Posts: 273
- Joined: 07 Apr 2013 13:22
- Location: DE/ RLP
- Status: Offline
Platte wechseln wie
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Platte wechseln wie
bitte mach zu dem gleichen thema keinen neuen thread auf.
die faq hat eine antwort auf diese oft gestellte frage
http://wiki.nas4free.org/doku.php?id=faq:0149
die faq hat eine antwort auf diese oft gestellte frage
http://wiki.nas4free.org/doku.php?id=faq:0149
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
seller
- Advanced User
- Posts: 273
- Joined: 07 Apr 2013 13:22
- Location: DE/ RLP
- Status: Offline
Re: Platte wechseln wie
habe die Wiki befolgt und auch den Befehl angepasst an mein NAS eingegebenbekomme aber nun folgendes Bild:
das schaut für mich aus als wenn nix geht...
Muss ich die platte vor den resilverbefehl online nehmen?
Bitte um Hilfestellung.
Gruß
Seller
Code: Select all
pool: NAS
state: DEGRADED
status: One or more devices has been taken offline by the administrator.
Sufficient replicas exist for the pool to continue functioning in a
degraded state.
action: Online the device using 'zpool online' or replace the device with
'zpool replace'.
scan: scrub repaired 0 in 9h23m with 0 errors on Wed Jul 1 15:08:30 2015
config:
NAME STATE READ WRITE CKSUM
NAS DEGRADED 0 0 0
raidz1-0 DEGRADED 0 0 0
ada1.nop ONLINE 0 0 0
ada0 ONLINE 0 0 0
4883851139704017545 OFFLINE 0 0 0 was /dev/ada2.nop
ada3.nop ONLINE 0 0 0
errors: No known data errorsMuss ich die platte vor den resilverbefehl online nehmen?
Bitte um Hilfestellung.
Gruß
Seller
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
-
seller
- Advanced User
- Posts: 273
- Joined: 07 Apr 2013 13:22
- Location: DE/ RLP
- Status: Offline
Re: Platte wechseln wie
hier noch der BEfehl den ich eingegeben habe
Code: Select all
zpool replace NAS ada2**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Platte wechseln wie
zpool replace NAS 4883851139704017545 ada2
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
seller
- Advanced User
- Posts: 273
- Joined: 07 Apr 2013 13:22
- Location: DE/ RLP
- Status: Offline
Re: Platte wechseln wie
Hallo bOssman,
Danke! Das hatt ich dann wohl missverstanden.
resilver läuft soll in ca 6,5/h fertig sein...
melde mich wenns geklappt hat, oder Probleme gibt.
Gruß
Seller
Danke! Das hatt ich dann wohl missverstanden.
resilver läuft soll in ca 6,5/h fertig sein...
melde mich wenns geklappt hat, oder Probleme gibt.
Gruß
Seller
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
-
seller
- Advanced User
- Posts: 273
- Joined: 07 Apr 2013 13:22
- Location: DE/ RLP
- Status: Offline
Re: Platte wechseln wie
So sieht die Info jetzt aus:
was bedeutet denn das nop bei ada1 und ada3, bzw was beduetet dass bei ada 2 und ada0 kein nop steht?
hier noch die SMART info:
nach erster Prüfung alle DAten vorhanden, alles geklappt!!!
Super! als mir vor Jahren sowas mit "Windoofs" passierte, waren die Daten, außer denen die ich in mühsamer Kleinarbeit noch von der Platte kopieren konnte, futsch!
ZFS ist das allerbeste!
Und an bOssman, vielen Dank für die Hilfe!!!
WINDOOFSFREIE ZONE, nur noch MAC und NA4FREE!
Gruß
Seller
Code: Select all
Poolinformation und Status
pool: NAS
state: ONLINE
scan: resilvered 1.13T in 6h31m with 0 errors on Sat Jul 25 03:02:56 2015
config:
NAME STATE READ WRITE CKSUM
NAS ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
ada1.nop ONLINE 0 0 0
ada0 ONLINE 0 0 0
ada2 ONLINE 0 0 0
ada3.nop ONLINE 0 0 0
errors: No known data errorshier noch die SMART info:
Code: Select all
Gerät /dev/ada0 - SAMSUNG HD203WI 1AN10003
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F3 EG
Device Model: SAMSUNG HD203WI
Serial Number: S2ACJ1AZ800553
LU WWN Device Id: 5 0024e9 003ed6ac6
Firmware Version: 1AN10003
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Jul 25 07:59:16 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (25800) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 430) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 12
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 060 058 025 Pre-fail Always - 12309
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 282
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 33059
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 345
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 283
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 063 057 000 Old_age Always - 37 (Min/Max 16/43)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 487
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 146593
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Gerät /dev/ada1 - SAMSUNG HD203WI 1AN10003
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F3 EG
Device Model: SAMSUNG HD203WI
Serial Number: S2ACJ1AZ800550
LU WWN Device Id: 5 0024e9 003ed688e
Firmware Version: 1AN10003
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Jul 25 07:59:18 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (25260) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 421) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 2
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 060 057 025 Pre-fail Always - 12295
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 292
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 33053
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 340
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 846
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 056 000 Old_age Always - 34 (Min/Max 17/44)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 001 001 000 Old_age Always - 572977
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 144799
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Gerät /dev/ada2 - ST2000VN000-1HJ164 SC60
=== START OF INFORMATION SECTION ===
Device Model: ST2000VN000-1HJ164
Serial Number: W521GBYM
LU WWN Device Id: 5 000c50 08a5ad216
Firmware Version: SC60
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Jul 25 07:59:19 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 97) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 243) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 006 Pre-fail Always - 589552
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 061 060 030 Pre-fail Always - 1353756
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 14
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 061 045 Old_age Always - 36 (Min/Max 26/39)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1
194 Temperature_Celsius 0x0022 036 040 000 Old_age Always - 36 (0 26 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Gerät /dev/ada3 - TOSHIBA DT01ACA200 MX4OABB0
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" HDD DT01ACA...
Device Model: TOSHIBA DT01ACA200
Serial Number: 13B9ARBGS
LU WWN Device Id: 5 000039 ff3c43f96
Firmware Version: MX4OABB0
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Jul 25 07:59:19 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15300) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 71
3 Spin_Up_Time 0x0007 131 131 024 Pre-fail Always - 290 (Average 290)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 225
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 16141
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 225
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 744
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 744
194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 35 (Min/Max 20/43)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Gerät /dev/da0 - USB2.0 FlashDisk 0.00
/dev/da0: Unknown USB bridge [0x1307:0x0165 (0x100)]
Please specify device type with the -d option.
Super! als mir vor Jahren sowas mit "Windoofs" passierte, waren die Daten, außer denen die ich in mühsamer Kleinarbeit noch von der Platte kopieren konnte, futsch!
ZFS ist das allerbeste!
Und an bOssman, vielen Dank für die Hilfe!!!
WINDOOFSFREIE ZONE, nur noch MAC und NA4FREE!
Gruß
Seller
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
-
crowi
- Forum Moderator
- Posts: 1176
- Joined: 21 Feb 2013 16:18
- Location: Munich, Germany
- Status: Offline
Re: Platte wechseln wie
unter 8) steht wie Du das .nop loswirst:
viewtopic.php?f=93&t=7041
viewtopic.php?f=93&t=7041
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
-
seller
- Advanced User
- Posts: 273
- Joined: 07 Apr 2013 13:22
- Location: DE/ RLP
- Status: Offline
Re: Platte wechseln wie
hallo crowl, danke für den Hinweis, ist das nur Kosmetik oder hat das .nop irgend ne wichtige Bedeutung?
**** NAS Nr 1:11.0.0.4.3252 Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 2 Stück x WD-RED 2 TB, WD20EFRX, 2 Stück 2 TB SAMSUNG HD203WI 1AN10003,
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
**** Nas Nr 2: 11.0.0.4.3252, Embeded auf 8 GB USB Stick, HP ProLiant MicroServer Gen8 Entry Server - Celeron G1610T 2.3 GHz - 12 GB RAM ECC unregistered, 4 x WD-RED 2 TB, WD20EFRX
-
crowi
- Forum Moderator
- Posts: 1176
- Joined: 21 Feb 2013 16:18
- Location: Munich, Germany
- Status: Offline
Re: Platte wechseln wie
Das ist reine Kosmetik, siehe auch hier:
viewtopic.php?t=6684
nops werden benötigt um 4k Format zu ermöglichen und damit das alignment zu optimieren.
viewtopic.php?t=6684
nops werden benötigt um 4k Format zu ermöglichen und damit das alignment zu optimieren.
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded