XigmaNAS

Posted: **19 Nov 2013 12:52**

Hola,
tengo el siguiente problema ,la tarjeta de red integrada es una IntelPRO/1000, en la informacion de sistema me indica que el driver de la tarjeta esta cargado pero sin embargo no consigo mantener la tarjeta en 1G/full duplex ya que siempre se reconfigura sola en 100M/fullduplex.Adjunto info de la salida ifconfig y salida de dmsg.boot.

Mi pregunta es ,que puedo hacer para que el NIC se quede en la configuracion de 1000/full-duplex y no cambie de nuevo la configuracion.
Toda la red esta cableada conectada a un router modelo: Wireless N Gigabit Router DIR-655.

Code: Select all

peterswebdesign: ~ # cat /var/run/dmesg.boot
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE-p5 #0 r254466M: Sat Aug 17 22:54:54 CEST 2013
    root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64
CPU: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz (1862.05-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Family = 6  Model = f  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4005048320 (3819 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4800-0x4807 mem 0xd0000000-0xd00fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <Intel Q965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0x4828-0x482f,0x480c-0x480f,0x4820-0x4827,0x4808-0x480b,0x4810-0x481f irq 18 at device 3.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x4840-0x485f mem 0xd0400000-0xd041ffff,0xd0421000-0xd0421fff irq 18 at device 25.0 on pci0
em0: No MSI/MSIX using a Legacy IRQ
em0: Ethernet address: 00:30:05:d0:2a:11
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x4860-0x487f irq 20 at device 26.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x4880-0x489f irq 18 at device 26.1 on pci0
usbus1 on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xd0422400-0xd04227ff irq 18 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x48a0-0x48bf irq 23 at device 29.0 on pci0
usbus3 on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x48c0-0x48df irq 22 at device 29.1 on pci0
usbus4 on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x48e0-0x48ff irq 21 at device 29.2 on pci0
usbus5 on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xd0422800-0xd0422bff irq 23 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: failed to allocate initial memory window: 0xd0100000-0xd01fffff
pci12: <ACPI PCI bus> on pcib1
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x5000-0x50ff irq 22 at device 5.0 on pci12
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
ahc1: <Adaptec 19160B Ultra160 SCSI adapter> port 0x5400-0x54ff mem 0xd0101000-0xd0101fff irq 21 at device 7.0 on pci12
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4c10-0x4c1f,0x4c00-0x4c0f at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH8 SATA300 controller> port 0x4c80-0x4c87,0x4c74-0x4c77,0x4c78-0x4c7f,0x4c70-0x4c73,0x4c60-0x4c6f,0x4c30-0x4c3f irq 22 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcb7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 10.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
iSCSI boot driver version 0.2.6
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
ugen4.2: <CHESEN> at usbus4
ukbd0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4
kbd2 at ukbd0
uhid0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4
ugen2.2: <Generic> at usbus2
umass0: <Bulk-In, Bulk-Out, Interface> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:9:0:-1: Attached to scbus9
ugen2.3: <TOSHIBA> at usbus2
umass1: <TOSHIBA TransMemory, class 0/0, rev 2.00/1.00, addr 3> on usbus2
umass1:  SCSI over Bulk-Only; quirks = 0x4100
umass1:10:1:-1: Attached to scbus10
da4 at umass-sim1 bus 1 scbus10 target 0 lun 0
da4: <TOSHIBA TransMemory 1.00> Removable Direct Access SCSI-4 device
da4: 40.000MB/s transfers
da4: 14793MB (30297216 512 byte sectors: 255H 63S/T 1885C)
da0 at umass-sim0 bus 0 scbus9 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
sa0 at ahc1 bus 0 scbus3 target 3 lun 0
sa0: <QUANTUM DLT VS160 2D00> Removable Sequential Access SCSI-2 device
da1 at umass-sim0 bus 0 scbus9 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
sa0: 160.000MB/s transfers (80.000MHz DT, offset 96, 16bit)
ada0 at ata0 bus 0 scbus4 target 0 lun 0
ada0: <ST3250824AS 3.AAE> ATA-7 SATA 2.x device
da2 at umass-sim0 bus 0 scbus9 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
ada1 at ata1 bus 0 scbus5 target 0 lun 0
da3 at umass-sim0 bus 0 scbus9 target 0 lun 3
da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
ada1: <MAXTOR STM3250820AS 3.AAE> ATA-7 SATA 2.x device
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada1: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad2
ada2 at ata4 bus 0 scbus6 target 0 lun 0
ada2: <ST3250824AS 3.AAE> ATA-7 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada2: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 14547297 Hz quality 1000
Trying to mount root from ufs:/dev/ufsid/5275887d19888584 [rw]...
WARNING: / was not properly dismounted
GEOM_NOP: Device ada0.nop created.
GEOM_NOP: Device ada1.nop created.
GEOM_NOP: Device ada2.nop created.

salida de ifconfig:

peterswebdesign: ~ # ifconfig
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
ether 00:30:05:d0:2a:11
inet 192.168.1.250 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::230:5ff:fed0:2a11%em0 prefixlen 64 scopeid 0x1
inet 192.168.1.20 netmask 0xffffff00 broadcast 192.168.1.255
inet 192.168.1.21 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

Posted: **19 Nov 2013 20:56**

Las NIC de intel son las mas compatibles y las que mejores drivers tienen en BSD, por lo que es muy raro lo que te pasa.

tendrias que hacer varias pruebas para identificar univocamente que el problema está en la controladora y no en el cable o en el router.

prueba a conectar un portatil que sepas con seguridad que tiene una tarjeta de 1GB y conectalo diectamenta a la boca RJ-45 con el mismo cable que usas ahora, si sigue a 100MB, prueba a cambiar el latiguillo, si aún sigue a 100MB, habras descartado el cable y el router aunque poco más se podrá hacer.

veo que te da un error raro que nunca habia visto:

Code: Select all

em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x4840-0x485f mem 0xd0400000-0xd041ffff,0xd0421000-0xd0421fff irq 18 at device 25.0 on pci0
em0: No MSI/MSIX using a Legacy IRQ
em0: Ethernet address: 00:30:05:d0:2a:11

no se si tendra que ver en lo que te pasa, mira este post a ver si te ayuda: http://lists.freebsd.org/pipermail/free ... 62514.html

tambien veo un problema en el sistema:

Code: Select all

Trying to mount root from ufs:/dev/ufsid/5275887d19888584 [rw]...
WARNING: / was not properly dismounted

haz una nueva instalación desde cero a ver si con el sistema limpio se conecta bien ( es por si suena la flauta, pero no creo que sea el problema).

Yo más bien pienso en un problema con los cables, pero hasta que no hagas pruebas, no se puede asegurar.

Recuerda que para tener un enlace estable a 1GB el latiguillo debe ser cat6 si es de cat5 tendras 100MB aunque el router y la tarjeta de red sean de 1GB.

Posted: **20 Nov 2013 17:42**

gracias por tu respuesta rapida Raul.el cable esta descartado probare con la opcion del loader.conf como explican en el enlace a ver q tal te comentare el resultado luego .

Posted: **25 Nov 2013 13:48**

Sigo con el mismo problema ,supongo que se trata de la BIOS de la placa porque ahora tengo otros fallos tmb, asi que ire por una placa nueva y te seguire contando.La solucion que me mencionaste no sirve en mi caso, seguire indagando a ver que tal.

Posted: **25 Nov 2013 20:25**

XigmaNAS

NIC red no se comunica a 1G

NIC red no se comunica a 1G

Re: NIC red no se comunica a 1G

Re: NIC red no se comunica a 1G

Re: NIC red no se comunica a 1G

Re: NIC red no se comunica a 1G