he estado viendo y creo que debe de ser el archivo default
lo he editado con pspad y muestra esto
PROMPT 1
DEFAULT 1
TIMEOUT 200
DISPLAY readme
label 1
KERNEL /Acronis11/kernel.dat quiet
APPEND initrd=/Acronis11/ramdisk.dat /s vga=0x314 quiet mbrcrcs=on
label 2
KERNEL /Acronis13/kernel.dat quiet
APPEND initrd=/Acronis13/ramdisk.dat /s vga=0x314 quiet mbrcrcs=on
label 3
KERNEL memtest
label 4
KERNEL /HBCD/memdisk
APPEND initrd=/HBCD/boot.gz
asi que supongo que sera este
donde pone KERNEL /HBCD/memdisk
supongo que habra que crear la carpeta HBCD y dentro los archivos de la iso correcto?
y asi para cada una de las opciones boot
en mi caso crearia 2 carpetas para cada uno de los media center
Salon
Habitacion
y dentro de dicha carpeta tendria que meter la configuracion DHCP para dicho equipo?
el archivo es este dhcpd.conf?
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "raulfg.org";
option domain-name-servers nas1.raulfg.org, nas2.raulfg.org;
default-lease-time 600;
max-lease-time 7200;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
#subnet 10.152.187.0 netmask 255.255.255.0 {
#}
# This is a very basic subnet declaration.
#subnet 10.254.239.0 netmask 255.255.255.224 {
# range 10.254.239.10 10.254.239.20;
# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
#}
# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.
allow booting;
allow bootp;
subnet 192.168.1.0 netmask 255.255.255.0 {
range dynamic-bootp 192.168.1.20 192.168.1.29;
option routers 192.168.1.100;
option broadcast-address 192.168.1.255;
option domain-name-servers 80.58.61.250;
option root-path "192.168.1.17";
filename "pxelinux.0";
}
# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name "internal.example.org";
# option routers 10.5.5.1;
# option broadcast-address 10.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
#host ipad {
# hardware ethernet 70
e2:66:28:f3;
# filename "vmunix.ipad";
# server-name "ipad.raulfg.org";
#}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
host ipad{
hardware ethernet 70
e2:66:28:f3;
fixed-address 192.168.1.9;
}
host p5qws{
hardware ethernet 90:e6:ba:3c:9d:ad;
fixed-address 192.168.1.10;
}
host raulfg{
hardware ethernet 90:e6:ba:3c:9d:4e;
fixed-address 192.168.1.11;
}
host alex{
hardware ethernet 00:21:5a:61:ee:e1;
fixed-address 192.168.1.12;
}
# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.
#class "foo" {
# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}
#
#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of "foo";
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of "foo";
# range 10.0.29.10 10.0.29.230;
# }
#}
tendria que instalar el server DHCP en NAS4Free?
tengo un router con dhcp habilitado pero desconozco si necesita de algo especial el DHCP para el PXE Boot
me aconsejas hacer esto en el NAS o puedo tener algun problema?
como XBMC actualiza las librerias de peliculas y musica quiza seria mejor montar un hdd al nas para no machacar el zpool?
muchisimas gracias