[Résolu]Upgrade du pool Après passage 9.3.0.2.xxx vers 10.2.0.2.xxx
Posted: 27 Nov 2015 15:45
bonjour,
Après une migration 9.3.0.2.1955 vers 10.2.0.2.2067 mon pool demande apparemment un upgrade ?
quelqu'un peut me dire ? merci d'avance
Après une migration 9.3.0.2.1955 vers 10.2.0.2.2067 mon pool demande apparemment un upgrade ?
quelqu'un peut me dire ? merci d'avance
nas4free: ~# zpool status
pool: pool1
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
scan: resilvered 202G in 1h9m with 0 errors on Fri Nov 27 15:33:54 2015
config:
NAME STATE READ WRITE CKSUM
pool1 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
ada1 ONLINE 0 0 0
ada2 ONLINE 0 0 0
ada3 ONLINE 0 0 0
ada4 ONLINE 0 0 0
cache
ada5 ONLINE 0 0 0
errors: No known data errors
nas4free: ~#
