XigmaNAS

Bonjour,

Mon NAS (nas4free 9.0.0.1 + 6DD 3TB + supermicro X7SPA) ne démarre plus :

- Erreur = RAID5 : device still open ...

Suite aux conseils trouvés sur le forum j'ai tenté de démarrer sur le live CD (live USB dans mon cas) et il m'est impossible de charger celui-ci >> j'obtiens toujours l'erreur suivante :

- hdac_get_capabilites : Invalid corb size (3)

J’ai tenté de monter les live CD suivant :
Nas4free X64 - 9.1.0.1
Nas4free x86 - 9.1.0.1
FreeBSD 4.6 liveCD

Et le résultat reste le même

Pourriez-vous m'apporter votre aide ?

D'avance merci
Cordialement

revise BIOS and disable all related to Sound (You do not need sound in your NAS), error seen to be related to sound: http://lists.freebsd.org/pipermail/free ... 18812.html

Hello Raulfg3, thanks for your quick answer.

In fact here is no audio chipset on my board (X7SPA-HF-D525), it's a specificty from X7SPA-L only.

Indeed that's why i'm a little bit surprise of this issue.

in addtition, it is no Audio parameter on the bios due to the audio chipset absence.

how could we precise to refuse to call a specific module during the installation ?

Thanks in advance for your feedback

Best regards

hello,

i have something new to add :

i successfully loaded freenas live cd last eveninig.

freenas performed a syncrhonisation of the raid5 and now i'm able to load my nas without live cd. however here is no /dev/raid5/mymountpoint when i'm checking myslef ... and the webgui indicate an error on mount point.

for information = i can see /dev/raid5 when i load the freenas live cd...

could you help me ?

Thanks in advance

best regards

provide more info in one post. and try new button "Clear config & import Disk", and new button "import raid disk" all in Disks|Management

ok no pb,

Regarding the button, here is no "Clear config & import Disk", and "import raid disk" in Disks|Management, probably because i have installed the 9.0.0.1 revision of nas4free

- As i said, it is impossible for me to load the 9.1.0.1 revision... and i do not understand the reason of the error link to the intel hd audio chipset (here is no audio chipset on my main board).

may i have to process manually ?

for the information required, how could i process to provide you more visibility ? (sorry for my lack of skill)

thanks in advance for your help.

Regards

ok so i tried to remove manually all hd from "disk management" and replace them with the same option and name.

after that i tried to create the same array with the same name and when i cicked on "apply modification" i saw the message "geom_raid5 is too old" on all the hd...

Regards

hello

I changed my hardware configuration and i'm able now to boot from USB or live cd.

here is my current issue.
http://i.imgur.com/20JuIjo.jpg
http://i.imgur.com/r88mn6X.jpg

Anybody now how it can be solved ?

Thanks in advance
Regards

Bonjour,
Avez vous vérifié, nettoyé vos connecteurs sata ? particulièrement ceux de ada1 et ada 6.
Si vous débranchez ada1 et ada 6, le boot va -t-il plus loin ? (des disques corrompus peuvent bloquer le fonctionnement d'un nas)
D'autre part il me paraît inquiétant sur un raid5 que 2 disques soient hs ....