Informations about ATA status
Posted: 17 Feb 2014 19:25
Hi there,
I'm using 9.1.0.1 - Sandstorm (revision 690) on x64-full on AMD Athlon(tm) II Neo N36L Dual-Core Processor.
At OS boot, I'm having this
Previously I've made a check on all disks with fsck, badblocks and smartctl. I've addedd a new disk an all is working fine now.
Is it all OK with my disks?
I'm using 9.1.0.1 - Sandstorm (revision 690) on x64-full on AMD Athlon(tm) II Neo N36L Dual-Core Processor.
At OS boot, I'm having this
Code: Select all
(aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
...
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <VB0250EAVER HPG0> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD5001AALS-00J7B1 05.00K05> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <ST3500320AS SD15> ATA-8 SATA 1.x device
ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)Is it all OK with my disks?