XigmaNAS

Posted: **03 May 2014 00:28**

This controller is an eSATA wich i have 2 storbox holding 9 WD 2TB red.

During boot i see something like this

NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe0:ahcich2:0:15:0): CAM status: Command timeout
(aprobe0:ahcich7:0:15:0): Error 5, Retries exhausted

Code: Select all

NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe0:ahcich7:0:15:0): CAM status: Command timeout
(aprobe0:ahcich7:0:15:0): Error 5, Retries exhausted

Wich means that my pools do not function.
I am missing 2 WD 2TB red

Can import without force, but then it will be broken pools.

Is there a easy solution to fix it as i guess this controller do work with freebsd

Posted: **03 May 2014 06:37**

do the storbox have port multiplier in them?

i.e one cable going to a box with 5 drives?

it seems that there are some problems with using them.

Posted: **03 May 2014 09:51**

Yes port multiplier on them both.
They was working before so they do work.

But i was swapping to another internal controller for now just to bring pools up and there is a error wich scrub report at ada3.
Why i do this now is to prepare for new 3TB hdd`s and new controllers internal.

XigmaNAS

Marvell 88SE912x AHCI SATA controller (missing 2 hdd`s)

Marvell 88SE912x AHCI SATA controller (missing 2 hdd`s)

Re: Marvell 88SE912x AHCI SATA controller (missing 2 hdd`s)

Re: Marvell 88SE912x AHCI SATA controller (missing 2 hdd`s)