Adding another drive = reboot loop
Posted: 23 Feb 2015 19:05
Hello,
I generated this report through WebUI, sorry for its crappy look (is it just me, or this generated report - although formatted especially for phpBB Forums look like trash?):
NAS4Free 9.2.0.1 (revision 972) x64-full
122607 RSDT2116 AMD Sempron(tm) Processor LE-1150 4864MiB RAM
OHCI (generic) USB controller bus=1 hubaddr=2 port=2 devaddr=2
interface=0 bus=1 hubaddr=2 port=2 devaddr=2 interface=1 bus=1
hubaddr=2 port=2 devaddr=2 interface=2 nVidia nForce MCP67 UDMA133
controller RTL8169S/8110S/8211 1000BASE-T media interface EHCI
(generic) USB 2.0 controller
Subject:
Reboot loop if HDD added
Description:
Adding a single SATA HDD to the computer ends up in a reboot loop
("Automatically rebooting in 15 seconds"). 2 x 2 TB Drives set up as Raid 1,
everything is fine. Just want to add one drive, temporarily, so I can move the
files on it to the NAS. The added single drive is just a old SATA Samsung 200 GB HDD, nothing fancy, and it is in working condition.
Any hints why my NAS4Free keeps rebooting when I just want to perform this basic task?
I generated this report through WebUI, sorry for its crappy look (is it just me, or this generated report - although formatted especially for phpBB Forums look like trash?):
NAS4Free 9.2.0.1 (revision 972) x64-full
122607 RSDT2116 AMD Sempron(tm) Processor LE-1150 4864MiB RAM
OHCI (generic) USB controller bus=1 hubaddr=2 port=2 devaddr=2
interface=0 bus=1 hubaddr=2 port=2 devaddr=2 interface=1 bus=1
hubaddr=2 port=2 devaddr=2 interface=2 nVidia nForce MCP67 UDMA133
controller RTL8169S/8110S/8211 1000BASE-T media interface EHCI
(generic) USB 2.0 controller
Subject:
Reboot loop if HDD added
Description:
Adding a single SATA HDD to the computer ends up in a reboot loop
("Automatically rebooting in 15 seconds"). 2 x 2 TB Drives set up as Raid 1,
everything is fine. Just want to add one drive, temporarily, so I can move the
files on it to the NAS. The added single drive is just a old SATA Samsung 200 GB HDD, nothing fancy, and it is in working condition.
Code: Select all
Reboots every 15 secs, no obvious errors shown.