I just setup a ZRaid3 with 4 500gb drives.
NAS4Free reports 1.81T, but my windows 7 clients are only reporting a total of 500gb.
Why is it reporting it this way?
Thanks
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
ZRaid3 Reported disk space
-
bgold
- Starter
- Posts: 41
- Joined: 23 May 2015 08:42
- Status: Offline
ZRaid3 Reported disk space
XigmaNAS 12.0.0.4.6625
HP ML150 Gen9, Dual 2.4ghz, 256gb, 25TB Storage, 3-ZFS pools w/SSD cache&logs, SSD boot/data, SFP+
HP ML150 Gen9, Dual 2.4ghz, 256gb, 25TB Storage, 3-ZFS pools w/SSD cache&logs, SSD boot/data, SFP+
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: ZRaid3 Reported disk space
500GB is total free space ( you have 4 500GB disk and use 3 as parity disk).
1,81 is total space ( include Parity Disk).
1,81 is total space ( include Parity Disk).
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
bgold
- Starter
- Posts: 41
- Joined: 23 May 2015 08:42
- Status: Offline
Re: ZRaid3 Reported disk space
That makes sense. I am using extended GUI and it reports it incorrectly then.
Thanks
Thanks
XigmaNAS 12.0.0.4.6625
HP ML150 Gen9, Dual 2.4ghz, 256gb, 25TB Storage, 3-ZFS pools w/SSD cache&logs, SSD boot/data, SFP+
HP ML150 Gen9, Dual 2.4ghz, 256gb, 25TB Storage, 3-ZFS pools w/SSD cache&logs, SSD boot/data, SFP+