Page 1 of 1
Two disks acting wierd, removed, but showing smart status
Posted: 22 Sep 2013 20:03
by cancerman
I added a spare to my zpool and am doing an online resilver, replace da15 da9. All of a sudden da15 shows up as removed and my pool is degraded. SMART Info shows the drive as online and passed. What gives? Controller issue? How can I troubleshoot?
pool: Media
state: DEGRADED
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Sat Sep 21 23:32:52 2013
1.17T scanned out of 5.93T at 54.5M/s, 25h26m to go
299G resilvered, 19.67% done
config:
NAME STATE READ WRITE CKSUM
Media DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 5
da4 ONLINE 0 0 0
da5 ONLINE 0 0 0
da6 ONLINE 0 0 0
da7 ONLINE 0 0 0
da12 ONLINE 0 0 0
da13 ONLINE 0 0 4
da14 ONLINE 0 0 0
spare-7 DEGRADED 0 0 8
7509951103204651156 REMOVED 0 0 0 was /dev/da15 (resilvering)
da9 ONLINE 0 0 0 (resilvering)
cache
ada1 ONLINE 0 0 0
spares
8029335709085696864 INUSE was /dev/da9
da2 AVAIL
errors: No known data errors
Re: Two disks acting wierd, removed, but showing smart statu
Posted: 22 Sep 2013 20:21
by cancerman
I'm seeing some weird things in the System log:
Sep 22 11:07:42 nas4free kernel: (da15:mpt0:0:27:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
Sep 22 11:07:42 nas4free kernel: (da15:mpt0:0:27:0): CAM status: SCSI Status Error
Sep 22 11:07:42 nas4free kernel: (da15:mpt0:0:27:0): SCSI status: Check Condition
Sep 22 11:07:42 nas4free kernel: (da15:mpt0:0:27:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
Sep 22 11:07:42 nas4free kernel: (da15:mpt0:0:27:0): Retrying command (per sense data)
Everything is plugged into a SAS expander and then into an LSISAS 1068E card in JBOD. Could this be a cabling issue? When I plugged the new drive in, it put itself at da9 and moved the rest of the drives down the line. Should I do a clear config and import?
Re: Two disks acting wierd, removed, but showing smart statu
Posted: 22 Sep 2013 22:58
by b0ssman
please post all smart values
smart passed means nothing
Re: Two disks acting wierd, removed, but showing smart statu
Posted: 23 Sep 2013 00:22
by cancerman
Code: Select all
Device /dev/da15 - ATA SAMSUNG HD103UJ 1113
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD103UJ
Serial Number: S13PJ1KS305293
LU WWN Device Id: 5 0024e9 0012294a2
Firmware Version: 1AA01113
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
Local Time is: Sun Sep 22 15:15:19 2013 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12240) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 205) minutes.
Conveyance self-test routine
recommended polling time: ( 22) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 079 079 011 Pre-fail Always - 7180
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1264
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 10113
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 19491
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1229
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 055 000 Old_age Always - 31 (Min/Max 30/31)
194 Temperature_Celsius 0x0022 068 054 000 Old_age Always - 32 (Min/Max 30/33)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 124516
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 099 099 000 Old_age Always - 921
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 17876 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Re: Two disks acting wierd, removed, but showing smart statu
Posted: 23 Sep 2013 08:29
by b0ssman
you said two discs. thats just smart of one.
but that one looks fine.
Re: Two disks acting wierd, removed, but showing smart statu
Posted: 24 Sep 2013 05:03
by cancerman
Well here is the smart for da9, but that wasn't the one that was saying removed. Anyway, the resilver completed, so I'm out of the woods. Just wondering why da15 said it was removed. It's still online now. I reformatted it. I wonder if I'm having a cabling issue with my sas breakout cables. I googled the power on reset error and got
this link.
Code: Select all
Device /dev/da9 - ATA WDC WD20EARS-00J 0A80
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (AF)
Device Model: WDC WD20EARS-00J2GB0
Serial Number: WD-WCAYY0195974
LU WWN Device Id: 5 0014ee 25a22196b
Firmware Version: 80.00A80
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Sep 23 19:52:11 2013 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (41880) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 477) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 175 161 021 Pre-fail Always - 8241
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 99
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 698
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 96
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 77
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2879
194 Temperature_Celsius 0x0022 114 108 000 Old_age Always - 38
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Re: Two disks acting wierd, removed, but showing smart statu
Posted: 24 Sep 2013 07:59
by b0ssman
yes your drives are fine.
dont forget to run wdidle3 on the wd green drive.
it could be cabeling.
how are the drives connected to the sas expander?
Re: Two disks acting wierd, removed, but showing smart statu
Posted: 25 Sep 2013 04:07
by cancerman
I have 5 SAS breakout cables coming off the expander, each are SFF-8087 to 4 sata cables. The expander goes into a supermicro usas-l8i. I guess I should make a sig with all of this.
I'm guessing in order to run wdidle3, I'll have to connect them directly to the onboard sata bus?
VVV That's better.
Re: Two disks acting wierd, removed, but showing smart statu
Posted: 25 Sep 2013 09:07
by raulfg3
cancerman wrote:I have 5 SAS breakout cables coming off the expander, each are SFF-8087 to 4 sata cables.
If you have SATA cable connected to USAS-L8i and no SATA disk on the end, you can have problems and corruptions, please disconnect each SFF-8087 that have no connected Disk.
Re: Two disks acting wierd, removed, but showing smart statu
Posted: 28 Sep 2013 17:17
by cancerman
Or just buy a few more Hard Drives?