XigmaNAS

Hi Guys,

im running ZFS RaidZ1 on 5 2TB HDDs, in a Hp Microserver N40L,

Last night i got an email saying that one of my HDDs was missing, i turned the server off(Not Hot Swappable) and had a look at the missing HDD(funny enough it wasn't missing it was right there....) and confirmed which one was missing.

I then decided to plug the HDD back in and restart the server.

The server now says that the POOL is Healthy and all the HDDs are ONLINE.

The server may have been working with only 4 HDDs for half a day to a day,

My question is, How can i tell that the Raidz1 pool is fully synchronized and make sure that it is running with all 5 drives perfectly?

Thanks,

Dan

go to ZFS webGUI and do a ZFS Scrub, when done, your zpool must be clean, (Or use Zpool clear) to delete warnnings.