This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!



I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

What to do?

Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

What to do?

Post by lindsay »

Got this when i am running scrub with latest version (925)

Code: Select all

Pool information and status

  pool: hda
 state: ONLINE
status: The pool is formatted using a legacy on-disk format.  The pool can
	still be used, but some features are unavailable.
action: Upgrade the pool using 'zpool upgrade'.  Once this is done, the
	pool will no longer be accessible on software that does not support feature
	flags.
  scan: scrub in progress since Tue Jan 14 18:21:11 2014
        391G scanned out of 2.02T at 186M/s, 2h33m to go
        0 repaired, 18.94% done
config:

	NAME        STATE     READ WRITE CKSUM
	hda         ONLINE       0     0     0
	  raidz1-0  ONLINE       0     0     0
	    ada1    ONLINE       0     0     0
	    ada2    ONLINE       0     0     0
	    ada3    ONLINE       0     0     0

errors: No known data errors

  pool: hdb
 state: ONLINE
status: The pool is formatted using a legacy on-disk format.  The pool can
	still be used, but some features are unavailable.
action: Upgrade the pool using 'zpool upgrade'.  Once this is done, the
	pool will no longer be accessible on software that does not support feature
	flags.
  scan: scrub in progress since Tue Jan 14 18:21:19 2014
        737G scanned out of 12.5T at 286M/s, 11h58m to go
        0 repaired, 5.76% done
config:

	NAME        STATE     READ WRITE CKSUM
	hdb         ONLINE       0     0     0
	  raidz1-0  ONLINE       0     0     0
	    ada4    ONLINE       0     0     0
	    ada5    ONLINE       0     0     0
	    ada6    ONLINE       0     0     0
	  raidz1-1  ONLINE       0     0     0
	    ada7    ONLINE       0     0     0
	    ada9    ONLINE       0     0     0
	    ada13   ONLINE       0     0     0
	  raidz1-2  ONLINE       0     0     0
	    ada8    ONLINE       0     0     0
	    ada11   ONLINE       0     0     0
	    ada12   ONLINE       0     0     0

errors: No known data errors

Copyright © 2012-2014 The NAS4Free Project
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror

User avatar
alexey123
Moderator
Moderator
Posts: 1469
Joined: 19 Aug 2012 08:22
Location: Israel, Karmiel
Contact:
Status: Offline

Re: What to do?

Post by alexey123 »

Short answer - wait.
You need upgrade zfs from V28 to V5000

Please check Disks|Management tab, if your all disks show true. If you want - send screenshot to forum.
Home12.1.0.4 - Ingva (revision 7091)/ x64-embedded on AMD A8-7600 Radeon R7 A88XM-PLUS/ 16G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: What to do?

Post by raulfg3 »

same as alexey123, wait until you are sure that no need to rever to ZFS v28, this are the readme file:

9.2.0.1.xxx ZFS v5000 Upgrade
=============================
The ZFS version has been upgraded from pool version 28 to v5000 (Feature Flags).
v5000 has new features added, the pools are marked with a property,
feature@featurename so that only compatible versions of ZFS will import the pool.
Some of these features include LZ4 compression and async destroy.
The upgrade to ZFS v5000 has to be manually performed from cli or by the GUI. "zfs
upgrade <poolname>" via the console or ssh, or in the
GUI under Disks|ZFS|Pools|Tools.
After you perform the ZFS upgrade, a downgrade to 9.1.0.1 series will not be
possible, so ensure
you are happy with the release BEFORE you upgrade the pool!
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

Post Reply

Return to “ZFS (only!)”