XigmaNAS

Hello everyone,

I created two RAIDZ2 called "Time_Machine" and "NAS RAIDZ2" and I would like to delete one of them called "NAS RAIDZ2" but I don't know how to delete it. When I go in menu Disk-->ZFS-->pool-->virtual device there is only one of the both which appear (called Time Machine), but the other one doesn't appear. Furthermore when I go in menu Disk-->ZFS-->configuration-->detected the both are listed.







What does it means? Is the RAIDZ2 already deleted or is it still present?

Thank you

give us some more information.

what have you done so that the pool is unavailable?
do you a full or an embedded install?
have you restarted the system?

I have a full install (the last one).

I reinstall nas4free recently because of these problem without restore a backup config (I restarted from a clean system) :

viewtopic.php?f=65&t=6730&p=38615#p38615

I restarted system several times and to delete the pool I tryed to format the HDDs of these pool (but the pool was already not listed in pool menu, that's why I tryed to delete it)

zpool destroy NAS
from the command line

i would advise you to use the embedded install rather than the full.
on an embedded install you would not have had the problem.

see
http://wiki.nas4free.org/doku.php?id=faq:0073

I don't know some people advice to use full others to use embedded... I'm lost^^

thank you for the command

edit : thank you it works and I think my system is faster now

there is no question that you should use the embedded install.

so what should I reinstall my system??

edit : what's more, when I reinstall nas4free, how to recover my ZFS RAIDz2 (for a RAID I have to import it in software RAID management menu)

save the config.

install nas4free embedded on an usb stick. restore config. done.

b0ssman wrote:save the config.

install nas4free embedded on an usb stick. restore config. done.

Yes, it is that easy. You can unplug your data drives while reinstalling as an added safety.