Hello. I've been using NAS4Free for a couple of years now and just ran into my first problem I wasn't able to solve with a Google search. I had a disk fail in my ZFS pool. I replaced the disk, it resilvered and there were some errors. I was able to delete some of the files (5) but 2 won't let me delete them. Every time I delete either of the 2 files my system crashes and reboots and when it comes back up it begins resilvering again. Any advice?
pool: Media
state: ONLINE
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Wed Aug 20 04:52:17 2014
105G scanned out of 2.09T at 83.8M/s, 6h53m to go
35.1G resilvered, 4.92% done
config:
NAME STATE READ WRITE CKSUM
Media ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
ada1 ONLINE 0 0 0
ada2 ONLINE 0 0 0
ada0 ONLINE 0 0 0 (resilvering)
errors: Permanent errors have been detected in the following files:
/mnt/Media/Movies/Survivor 2014 BRRip x264 AC3-MiLLENiUM/Survivor 2014 BRRip.mkv
/mnt/Media/Music/Jason_Derulo-Jason_Derulo/04-jason_derulo-the_skys_the_limit.mp3
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Unable to Delete File
-
kenZ71
- Advanced User
- Posts: 379
- Joined: 27 Jun 2012 20:18
- Location: Northeast, USA
- Status: Offline
Re: Unable to Delete File
Any chance you can create a new file with the same name? Perhaps by overwriting the bad files you will delete them?
11.2-RELEASE-p3 | ZFS Mirror - 2 x 8TB WD Red | 28GB ECC Ram
HP ML10v2 x64-embedded on Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz
Extra memory so I can host a couple VMs
1) Unifi Controller on Ubuntu
2) Librenms on Ubuntu
HP ML10v2 x64-embedded on Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz
Extra memory so I can host a couple VMs
1) Unifi Controller on Ubuntu
2) Librenms on Ubuntu
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Unable to Delete File
there is an article about this
http://www.zdnet.com/blog/storage/why-r ... n-2009/162
when one of your drives died you had no redundancy left.
the resilvering reported errors while rebuilding
this highly suggest that your other drives are failing to.
please post the smart values of your drives.
it seems that your pool had a read error in its file structure. unfortunately there are no file system repair tools for zfs.
you most likely have to recreate your pool from scratch.
http://www.zdnet.com/blog/storage/why-r ... n-2009/162
when one of your drives died you had no redundancy left.
the resilvering reported errors while rebuilding
this highly suggest that your other drives are failing to.
please post the smart values of your drives.
it seems that your pool had a read error in its file structure. unfortunately there are no file system repair tools for zfs.
you most likely have to recreate your pool from scratch.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
ScottB72
- NewUser
- Posts: 4
- Joined: 20 Aug 2014 10:57
- Status: Offline
Re: Unable to Delete File
Thank you both for your suggestions. I have tried replacing the files with files of the same name, actually with the same files from backup that also caused the server to crash and reboot thus starting the resilver process again.
The strange thing is both of these files are accessible and work. The .mkv file plays in it's entirety with VLC and the .mp3 file plays in iTunes with no issues.
Here is the SMART data for the 3 drives. Sorry I don't know how to paste it any other way:
Device /dev/ada0 - Seagate Barracuda 7200.14 (AF)
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-1CH164
Serial Number: Z1E76G6H
LU WWN Device Id: 5 000c50 06618c8ed
Firmware Version: CC29
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Aug 21 04:54:09 2014 EDT
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/e ... Q/207931en
http://knowledge.seagate.com/articles/e ... Q/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 207) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 41053728
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 2
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 33172247
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 109
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 2
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 1
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 064 045 Old_age Always - 31 (Min/Max 26/36)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 44
194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 26 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 105h+22m+37.544s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 12066371794
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2783204
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Device /dev/ada1 - Seagate Barracuda 7200.14 (AF)
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-9YN164
Serial Number: Z1E0SR24
LU WWN Device Id: 5 000c50 0512fdd8d
Firmware Version: CC4B
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Aug 21 04:54:11 2014 EDT
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/e ... Q/207931en
http://knowledge.seagate.com/articles/e ... Q/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 221) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 120208824
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 153865770
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13405
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 31
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 1
189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
190 Airflow_Temperature_Cel 0x0022 066 046 045 Old_age Always - 34 (Min/Max 31/39)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 12
193 Load_Cycle_Count 0x0032 059 059 000 Old_age Always - 82595
194 Temperature_Celsius 0x0022 034 054 000 Old_age Always - 34 (0 24 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5277h+38m+55.750s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 25052739987766
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 59369461518159
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1781 -
# 2 Short offline Completed without error 00% 1757 -
# 3 Short offline Completed without error 00% 1733 -
# 4 Short offline Completed without error 00% 1709 -
# 5 Short offline Completed without error 00% 1685 -
# 6 Short offline Completed without error 00% 1661 -
# 7 Short offline Completed without error 00% 1637 -
# 8 Short offline Completed without error 00% 1613 -
# 9 Short offline Completed without error 00% 1589 -
#10 Short offline Completed without error 00% 1565 -
#11 Short offline Completed without error 00% 1541 -
#12 Short offline Completed without error 00% 1517 -
#13 Short offline Completed without error 00% 1493 -
#14 Short offline Completed without error 00% 1469 -
#15 Short offline Completed without error 00% 1445 -
#16 Short offline Completed without error 00% 1421 -
#17 Short offline Completed without error 00% 1397 -
#18 Short offline Completed without error 00% 1373 -
#19 Short offline Completed without error 00% 1349 -
#20 Short offline Completed without error 00% 1325 -
#21 Short offline Completed without error 00% 1301 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Device /dev/ada2 - Seagate Barracuda 7200.14 (AF)
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-9YN164
Serial Number: Z2F0F9LZ
LU WWN Device Id: 5 000c50 04e8b2e52
Firmware Version: CC4B
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Aug 21 04:54:11 2014 EDT
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/e ... Q/207931en
http://knowledge.seagate.com/articles/e ... Q/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 265) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 088 006 Pre-fail Always - 166846360
3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33
5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 1992
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 153020342
9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 14989
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 27
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 700
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 1 2
189 High_Fly_Writes 0x003a 097 097 000 Old_age Always - 3
190 Airflow_Temperature_Cel 0x0022 069 049 045 Old_age Always - 31 (Min/Max 29/37)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8
193 Load_Cycle_Count 0x0032 059 059 000 Old_age Always - 82870
194 Temperature_Celsius 0x0022 031 051 000 Old_age Always - 31 (0 20 0 0 0)
197 Current_Pending_Sector 0x0012 100 001 000 Old_age Always - 153
198 Offline_Uncorrectable 0x0010 100 001 000 Old_age Offline - 153
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5272h+19m+08.795s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 132455305249370
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3616403580815
SMART Error Log Version: 1
ATA Error Count: 45 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 45 occurred at disk power-on lifetime: 13722 hours (571 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 69 af 0a Error: UNC at LBA = 0x0aaf69ff = 179268095
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 b1 6e af 4a 00 1d+05:24:12.410 READ FPDMA QUEUED
60 00 00 b1 6d af 4a 00 1d+05:24:12.410 READ FPDMA QUEUED
60 00 01 ff ff ff 4f 00 1d+05:24:12.410 READ FPDMA QUEUED
60 00 00 b1 6c af 4a 00 1d+05:24:12.410 READ FPDMA QUEUED
60 00 00 63 6b af 4a 00 1d+05:24:12.410 READ FPDMA QUEUED
Error 44 occurred at disk power-on lifetime: 13722 hours (571 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 69 af 0a Error: UNC at LBA = 0x0aaf69ff = 179268095
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 b1 6e af 4a 00 1d+05:24:09.495 READ FPDMA QUEUED
60 00 00 b1 6d af 4a 00 1d+05:24:09.495 READ FPDMA QUEUED
60 00 01 ff ff ff 4f 00 1d+05:24:09.495 READ FPDMA QUEUED
60 00 00 b1 6c af 4a 00 1d+05:24:09.495 READ FPDMA QUEUED
60 00 00 63 6b af 4a 00 1d+05:24:09.494 READ FPDMA QUEUED
Error 43 occurred at disk power-on lifetime: 13722 hours (571 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 69 af 0a Error: UNC at LBA = 0x0aaf69ff = 179268095
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 b1 6e af 4a 00 1d+05:24:06.593 READ FPDMA QUEUED
60 00 00 b1 6d af 4a 00 1d+05:24:06.578 READ FPDMA QUEUED
60 00 01 ff ff ff 4f 00 1d+05:24:06.578 READ FPDMA QUEUED
60 00 00 b1 6c af 4a 00 1d+05:24:06.577 READ FPDMA QUEUED
60 00 00 63 6b af 4a 00 1d+05:24:06.577 READ FPDMA QUEUED
Error 42 occurred at disk power-on lifetime: 13722 hours (571 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 69 af 0a Error: UNC at LBA = 0x0aaf69ff = 179268095
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 b1 6d af 4a 00 1d+05:24:03.325 READ FPDMA QUEUED
60 00 01 ff ff ff 4f 00 1d+05:24:03.324 READ FPDMA QUEUED
60 00 00 b1 6c af 4a 00 1d+05:24:03.315 READ FPDMA QUEUED
60 00 00 63 6b af 4a 00 1d+05:24:03.306 READ FPDMA QUEUED
60 00 00 bf f4 ae 4a 00 1d+05:24:03.234 READ FPDMA QUEUED
Error 41 occurred at disk power-on lifetime: 13722 hours (571 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 69 af 0a Error: UNC at LBA = 0x0aaf69ff = 179268095
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 bf f4 ae 4a 00 1d+05:24:00.271 READ FPDMA QUEUED
60 00 00 bf f3 ae 4a 00 1d+05:24:00.271 READ FPDMA QUEUED
60 00 00 bf f2 ae 4a 00 1d+05:24:00.261 READ FPDMA QUEUED
60 00 00 bf f1 ae 4a 00 1d+05:24:00.261 READ FPDMA QUEUED
60 00 00 02 ba ae 4a 00 1d+05:24:00.260 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3365 -
# 2 Short offline Completed without error 00% 3341 -
# 3 Short offline Completed without error 00% 3317 -
# 4 Short offline Completed without error 00% 3293 -
# 5 Short offline Completed without error 00% 3269 -
# 6 Short offline Completed without error 00% 3245 -
# 7 Short offline Completed without error 00% 3221 -
# 8 Short offline Completed without error 00% 3197 -
# 9 Short offline Completed without error 00% 3173 -
#10 Short offline Completed without error 00% 3149 -
#11 Short offline Completed without error 00% 3125 -
#12 Short offline Completed without error 00% 3101 -
#13 Short offline Completed without error 00% 3077 -
#14 Short offline Completed without error 00% 3053 -
#15 Short offline Completed without error 00% 3029 -
#16 Short offline Completed without error 00% 3005 -
#17 Short offline Completed without error 00% 2981 -
#18 Short offline Completed without error 00% 2957 -
#19 Short offline Completed without error 00% 2933 -
#20 Short offline Completed without error 00% 2909 -
#21 Short offline Completed without error 00% 2885 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The strange thing is both of these files are accessible and work. The .mkv file plays in it's entirety with VLC and the .mp3 file plays in iTunes with no issues.
Here is the SMART data for the 3 drives. Sorry I don't know how to paste it any other way:
Device /dev/ada0 - Seagate Barracuda 7200.14 (AF)
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-1CH164
Serial Number: Z1E76G6H
LU WWN Device Id: 5 000c50 06618c8ed
Firmware Version: CC29
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Aug 21 04:54:09 2014 EDT
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/e ... Q/207931en
http://knowledge.seagate.com/articles/e ... Q/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 207) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 41053728
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 2
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 33172247
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 109
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 2
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 1
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 064 045 Old_age Always - 31 (Min/Max 26/36)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 44
194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 26 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 105h+22m+37.544s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 12066371794
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2783204
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Device /dev/ada1 - Seagate Barracuda 7200.14 (AF)
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-9YN164
Serial Number: Z1E0SR24
LU WWN Device Id: 5 000c50 0512fdd8d
Firmware Version: CC4B
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Aug 21 04:54:11 2014 EDT
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/e ... Q/207931en
http://knowledge.seagate.com/articles/e ... Q/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 221) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 120208824
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 153865770
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13405
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 31
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 1
189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
190 Airflow_Temperature_Cel 0x0022 066 046 045 Old_age Always - 34 (Min/Max 31/39)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 12
193 Load_Cycle_Count 0x0032 059 059 000 Old_age Always - 82595
194 Temperature_Celsius 0x0022 034 054 000 Old_age Always - 34 (0 24 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5277h+38m+55.750s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 25052739987766
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 59369461518159
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1781 -
# 2 Short offline Completed without error 00% 1757 -
# 3 Short offline Completed without error 00% 1733 -
# 4 Short offline Completed without error 00% 1709 -
# 5 Short offline Completed without error 00% 1685 -
# 6 Short offline Completed without error 00% 1661 -
# 7 Short offline Completed without error 00% 1637 -
# 8 Short offline Completed without error 00% 1613 -
# 9 Short offline Completed without error 00% 1589 -
#10 Short offline Completed without error 00% 1565 -
#11 Short offline Completed without error 00% 1541 -
#12 Short offline Completed without error 00% 1517 -
#13 Short offline Completed without error 00% 1493 -
#14 Short offline Completed without error 00% 1469 -
#15 Short offline Completed without error 00% 1445 -
#16 Short offline Completed without error 00% 1421 -
#17 Short offline Completed without error 00% 1397 -
#18 Short offline Completed without error 00% 1373 -
#19 Short offline Completed without error 00% 1349 -
#20 Short offline Completed without error 00% 1325 -
#21 Short offline Completed without error 00% 1301 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Device /dev/ada2 - Seagate Barracuda 7200.14 (AF)
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-9YN164
Serial Number: Z2F0F9LZ
LU WWN Device Id: 5 000c50 04e8b2e52
Firmware Version: CC4B
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Aug 21 04:54:11 2014 EDT
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/e ... Q/207931en
http://knowledge.seagate.com/articles/e ... Q/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 265) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 088 006 Pre-fail Always - 166846360
3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33
5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 1992
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 153020342
9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 14989
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 27
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 700
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 1 2
189 High_Fly_Writes 0x003a 097 097 000 Old_age Always - 3
190 Airflow_Temperature_Cel 0x0022 069 049 045 Old_age Always - 31 (Min/Max 29/37)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8
193 Load_Cycle_Count 0x0032 059 059 000 Old_age Always - 82870
194 Temperature_Celsius 0x0022 031 051 000 Old_age Always - 31 (0 20 0 0 0)
197 Current_Pending_Sector 0x0012 100 001 000 Old_age Always - 153
198 Offline_Uncorrectable 0x0010 100 001 000 Old_age Offline - 153
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5272h+19m+08.795s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 132455305249370
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3616403580815
SMART Error Log Version: 1
ATA Error Count: 45 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 45 occurred at disk power-on lifetime: 13722 hours (571 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 69 af 0a Error: UNC at LBA = 0x0aaf69ff = 179268095
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 b1 6e af 4a 00 1d+05:24:12.410 READ FPDMA QUEUED
60 00 00 b1 6d af 4a 00 1d+05:24:12.410 READ FPDMA QUEUED
60 00 01 ff ff ff 4f 00 1d+05:24:12.410 READ FPDMA QUEUED
60 00 00 b1 6c af 4a 00 1d+05:24:12.410 READ FPDMA QUEUED
60 00 00 63 6b af 4a 00 1d+05:24:12.410 READ FPDMA QUEUED
Error 44 occurred at disk power-on lifetime: 13722 hours (571 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 69 af 0a Error: UNC at LBA = 0x0aaf69ff = 179268095
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 b1 6e af 4a 00 1d+05:24:09.495 READ FPDMA QUEUED
60 00 00 b1 6d af 4a 00 1d+05:24:09.495 READ FPDMA QUEUED
60 00 01 ff ff ff 4f 00 1d+05:24:09.495 READ FPDMA QUEUED
60 00 00 b1 6c af 4a 00 1d+05:24:09.495 READ FPDMA QUEUED
60 00 00 63 6b af 4a 00 1d+05:24:09.494 READ FPDMA QUEUED
Error 43 occurred at disk power-on lifetime: 13722 hours (571 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 69 af 0a Error: UNC at LBA = 0x0aaf69ff = 179268095
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 b1 6e af 4a 00 1d+05:24:06.593 READ FPDMA QUEUED
60 00 00 b1 6d af 4a 00 1d+05:24:06.578 READ FPDMA QUEUED
60 00 01 ff ff ff 4f 00 1d+05:24:06.578 READ FPDMA QUEUED
60 00 00 b1 6c af 4a 00 1d+05:24:06.577 READ FPDMA QUEUED
60 00 00 63 6b af 4a 00 1d+05:24:06.577 READ FPDMA QUEUED
Error 42 occurred at disk power-on lifetime: 13722 hours (571 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 69 af 0a Error: UNC at LBA = 0x0aaf69ff = 179268095
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 b1 6d af 4a 00 1d+05:24:03.325 READ FPDMA QUEUED
60 00 01 ff ff ff 4f 00 1d+05:24:03.324 READ FPDMA QUEUED
60 00 00 b1 6c af 4a 00 1d+05:24:03.315 READ FPDMA QUEUED
60 00 00 63 6b af 4a 00 1d+05:24:03.306 READ FPDMA QUEUED
60 00 00 bf f4 ae 4a 00 1d+05:24:03.234 READ FPDMA QUEUED
Error 41 occurred at disk power-on lifetime: 13722 hours (571 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff 69 af 0a Error: UNC at LBA = 0x0aaf69ff = 179268095
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 bf f4 ae 4a 00 1d+05:24:00.271 READ FPDMA QUEUED
60 00 00 bf f3 ae 4a 00 1d+05:24:00.271 READ FPDMA QUEUED
60 00 00 bf f2 ae 4a 00 1d+05:24:00.261 READ FPDMA QUEUED
60 00 00 bf f1 ae 4a 00 1d+05:24:00.261 READ FPDMA QUEUED
60 00 00 02 ba ae 4a 00 1d+05:24:00.260 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3365 -
# 2 Short offline Completed without error 00% 3341 -
# 3 Short offline Completed without error 00% 3317 -
# 4 Short offline Completed without error 00% 3293 -
# 5 Short offline Completed without error 00% 3269 -
# 6 Short offline Completed without error 00% 3245 -
# 7 Short offline Completed without error 00% 3221 -
# 8 Short offline Completed without error 00% 3197 -
# 9 Short offline Completed without error 00% 3173 -
#10 Short offline Completed without error 00% 3149 -
#11 Short offline Completed without error 00% 3125 -
#12 Short offline Completed without error 00% 3101 -
#13 Short offline Completed without error 00% 3077 -
#14 Short offline Completed without error 00% 3053 -
#15 Short offline Completed without error 00% 3029 -
#16 Short offline Completed without error 00% 3005 -
#17 Short offline Completed without error 00% 2981 -
#18 Short offline Completed without error 00% 2957 -
#19 Short offline Completed without error 00% 2933 -
#20 Short offline Completed without error 00% 2909 -
#21 Short offline Completed without error 00% 2885 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Unable to Delete File
/dev/ada2 is failing hard.
you have to replace that drive asap
you should also setup smart monitoring and email reporting.
5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 1992
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 700
197 Current_Pending_Sector 0x0012 100 001 000 Old_age Always - 153
198 Offline_Uncorrectable 0x0010 100 001 000 Old_age Offline - 153
you have to replace that drive asap
you should also setup smart monitoring and email reporting.
5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 1992
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 700
197 Current_Pending_Sector 0x0012 100 001 000 Old_age Always - 153
198 Offline_Uncorrectable 0x0010 100 001 000 Old_age Offline - 153
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
ScottB72
- NewUser
- Posts: 4
- Joined: 20 Aug 2014 10:57
- Status: Offline
Re: Unable to Delete File
I guess that shouldn't surprise me since all 3 were bought at the same time. I will do that, but now the system doesn't boot. It hangs on "Loading File System" or something like that. I will try replacing that bad drive and see if that helps. Thank you for your help, I appreciate it.
-
ScottB72
- NewUser
- Posts: 4
- Joined: 20 Aug 2014 10:57
- Status: Offline
Re: Unable to Delete File
Ok disks replaced. Back up and running, thank goodness for backups 
. Thank you for your help. I did setup SMART emails as you suggested so hopefully I'll catch disk fails early enough to save my data next time. Also setup weekly scrub on pool, lesson learned.
Thanks again,
Scott
. Thank you for your help. I did setup SMART emails as you suggested so hopefully I'll catch disk fails early enough to save my data next time. Also setup weekly scrub on pool, lesson learned.Thanks again,
Scott