Drives removed - Pool Still There :-(

[kokni]

Hello,

I am trying to delete pool1 (two mirrored drives have been removed) but it keeps re-appearing every time I reboot. What should I do?
Please see also the Disks|ZFS|Configuration which also look wrong. Any ideas ???

screenshot.png

pool: pool0
state: ONLINE
status: One or more devices are configured to use a non-native block size.
Expect reduced performance.
action: Replace affected devices with devices that support the
configured block size, or migrate data to a properly configured
pool.
scan: scrub in progress since Tue Mar 10 13:45:58 2015
329G scanned out of 760G at 73.5M/s, 1h40m to go
0 repaired, 43.26% done
config:
NAME STATE READ WRITE CKSUM
pool0 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
ada0 ONLINE 0 0 0 block size: 512B configured, 4096B native
ada1 ONLINE 0 0 0
errors: No known data errors

pool: pool1
state: UNAVAIL
status: One or more devices could not be opened. There are insufficient
replicas for the pool to continue functioning.
action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-3C
scan: none requested
config:
NAME STATE READ WRITE CKSUM
pool1 UNAVAIL 0 0 0
mirror-0 UNAVAIL 0 0 0
15155505055088766612 UNAVAIL 0 0 0 was /dev/ada2
13438207403055412329 UNAVAIL 0 0 0 was /dev/ada3

[b0ssman]

see
viewtopic.php?f=78&t=8340&p=51337&hilit ... fig#p51337

[kokni]

yes, that fixed the problem, thank you very much !