This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Incorrect total space being shown

Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
bgold
Starter
Starter
Posts: 41
Joined: 23 May 2015 08:42
Status: Offline

Incorrect total space being shown

Post by bgold »

I have a ZFS Pool that shows in the GUI as having a total of 10.9 TB and windows only shows only a total of 7 TB.

The pool originally consisted of 3 - 2 TB drives and I did replace each one with a 4 TB drive using the expand ZFS directions.

Each one did resilver completely.

Is there that much overhead?

Any ideas?

Thanks
Top
bgold
Starter
Starter
Posts: 41
Joined: 23 May 2015 08:42
Status: Offline

Re: Incorrect total space being shown

Post by bgold »

Looking further I noticed that in Diagnostics|Information|Space Used is shows 7 TB Total space.
XigmaNAS 12.0.0.4.6625
HP ML150 Gen9, Dual 2.4ghz, 256gb, 25TB Storage, 3-ZFS pools w/SSD cache&logs, SSD boot/data, SFP+
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Incorrect total space being shown

Post by b0ssman »

assuming that you have a raidz1 setup that sounds about right.

that 10.9 tb includes the parity information the 7tb does not.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
bgold
Starter
Starter
Posts: 41
Joined: 23 May 2015 08:42
Status: Offline

Re: Incorrect total space being shown

Post by bgold »

Yes I do have a raidz1.

Thanks for the clarification.

The GUI can be miss leading.
XigmaNAS 12.0.0.4.6625
HP ML150 Gen9, Dual 2.4ghz, 256gb, 25TB Storage, 3-ZFS pools w/SSD cache&logs, SSD boot/data, SFP+
Top
Post Reply

Return to “ZFS (only!)”