This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!



I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

NAS4Free 9.1.0.1.509 Released

Posts only related to Release Builds, all others will be removed!
Forum rules
Set-Up GuideFAQsForum Rules
User avatar
daoyama
Developer
Developer
Posts: 394
Joined: 25 Aug 2012 09:28
Location: Japan
Status: Offline

Re: NAS4Free 9.1.0.1.509 Released

Post by daoyama »

apollo567 wrote:
daoyama wrote:
apollo567 wrote: When I update from 431 to 467 or 509 the connection from Windows XP doesn't work anymore.
When I downgrade to 431 again it works again.
daoyama wrote: Try to reboot windows.
This didn't help (tried also new 531). I tried a reconnect the Cifs share with Windows Explorer, but he didn't find the CIFS-share. The services overview shows CIFS/Sama up and running.
daoyama wrote: Try to check with LiveCD/USB whether CIFS works or not.
You mean a fresh install ??
No, USE LiveCD/USB without install.

BTW, did you check master browser of your network?
in windows, "nbtstat -a NAME/IP" can be used.
in nas4free "nmblookup -M -- -" may help.

Daisuke Aoyama
NAS4Free 10.2.0.2.2115 (x64-embedded), 10.2.0.2.2258 (arm), 10.2.0.2.2258(dom0)
GIGABYTE 5YASV-RH, Celeron E3400 (Dual 2.6GHz), ECC 8GB, Intel ET/CT/82566DM (on-board), ZFS mirror (2TBx2)
ASRock E350M1/USB3, 16GB, Realtek 8111E (on-board), ZFS mirror (2TBx2)
MSI MS-9666, Core i7-860(Quad 2.8GHz/HT), 32GB, Mellanox ConnectX-2 EN/Intel 82578DM (on-board), ZFS mirror (3TBx2+L2ARC/ZIL:SSD128GB)
Develop/test environment:
VirtualBox 512MB VM, ESXi 512MB-8GB VM, Raspberry Pi, Pi2, ODROID-C1

User avatar
apollo567
Site Admin
Site Admin
Posts: 675
Joined: 23 Jun 2012 06:37
Location: Ludwigshafen, Germany
Status: Offline

Re: NAS4Free 9.1.0.1.509 Released

Post by apollo567 »

daoyama wrote: No, USE LiveCD/USB without install.

BTW, did you check master browser of your network?
in windows, "nbtstat -a NAME/IP" can be used.
in nas4free "nmblookup -M -- -" may help.

Daisuke Aoyama
nbtstat shows the same results for both versions, but 531 doesn't connect and 431 does. Haven't checked LiveUSB yet....
my NAS and its development until today: viewtopic.php?f=63&t=39&sid=039fed830cf ... 4d0abe4a04

Post Reply

Return to “Release Builds”