XigmaNAS

Posted: **06 Aug 2015 13:20**

M*I*B wrote:... maybe don't work unter 10.1.0.2 ?!?

Just try to install and that works fine. Also the new menuitem "Erweiterungen" (extensions) are up. But if I go there and click "TheBrig" I got...
Code: Select all
Warning: require_once(XML/Serializer.php): failed to open stream: No such file or directory in /usr/local/www/ext/thebrig/extensions_thebrig.php on line 10 Fatal error: require_once(): Failed opening required 'XML/Serializer.php' (include_path='.:/etc/inc:/usr/local/www') in /usr/local/www/ext/thebrig/extensions_thebrig.php on line 10 
So I have take a look into /usr/local/www/ext/thebrig there is'nt a folder like XML/ or anything like that and I also can't find a file named Serializer.php on the whole system...

Doing any wrong?

I have same problem ! Recommended Install - plugin dlna etc. to jail to run without any issue ! But We can not install jail without issue! Isnt it funny ? I need working NAS with ftp webserver ssh and DLNA server ! Anybody can help me please?

Posted: **06 Aug 2015 15:38**

... have you try "thiagomespb" way to install "unstable" version? I can check that out earliest tomorrow ...

Posted: **06 Aug 2015 15:59**

Mine is giving error. there solution? without stable version works.

Posted: **11 Aug 2015 10:51**

MikeMac wrote: I had described this (and more) in my RUSSIAN blog, see http://2gusia.livejournal.com/302626.html with google translator. Screenshots are from English interface

Thanks MikeMac for the help.
Although a few days ago, but I now found some time to read through your Blog, but could not solve the problem. (Have to admit, it was sometimes difficult to understand due to Google translation.)
Jail remains not running properly: NO Jail ID, NO Jail IP, NO Jail hostname and NO Path to jail.
Start/Stop button keeps malfunctioning too.

So I read, I have to edit the right config files to solve this. My problem is, I don't know, where to find them, or how to edit them exactly?
Can anyone give instructions, please?

Another point:
I deinstalled and reinstalled TheBrig now several times in Alcatraz and former branch. Could there be any file or fragment left I took not into account to erase before installing? (I usually deinstalled via GUI of TheBrig itself and then removed via terminal all data from the folder on my pool, where TheBrig is thougt to get installed to.)

Can we hope to have something fully fixed in a few days? Is Alexey still on the project?

Thank you for replying
regards

Posted: **11 Aug 2015 12:33**

MikeMac wrote:
HeinzHeinze wrote: issue for the start stop button
- also at a few cases there is a need to add hostname into jail's rc.conf

Repaired

Posted: **11 Aug 2015 17:23**

Hi All,

I have fresh installed 1731 and built the_brig alcatraz branch. In new jail, I have enabled mount devfs but I cannot find the device in jail:

root@faxsql:/dev # ls
crypto fd null pts random stderr stdin stdout urandom zero

I need to connect usb faxmodem in jail which I did in 9.3 Nas4free version. How can I re-connect all dev in jail?

______________________
NAS4Free 10.1.0.2 (revision 1731) x64-embedded; 122310 XSDT1951 AMD Athlon(tm) II X4 640 Processor 8192MiB RAM

Posted: **11 Aug 2015 22:22**

Hi, vkyk
You can add devicefs rule for open your device on jailed /dev

For example, device speaker
rule is

Code: Select all

add path speaker unhide

Type rule at right input window, under Rule for jail ruleset then push << button. Save config, apply changes and restart jail.

Posted: **12 Aug 2015 11:19**

Hey Guys, hopefully someone can help me out.

I'm running nas4free version 9.2.0.1, Im trying to get my first Jail up and running following this tutorial but I get up to the query stage to download tarballs and im getting this error:

Warning: stream_select(): No stream arrays were passed in /usr/local/www/ext/thebrig/extensions_thebrig_tarballs.php on line 121

This repeats about 10 times and then reloads the gui with the message

The following input errors were detected:
There seems to be a networking issue. I can't reach ftp.freebsd.org. Please check DNS and other networking settings. If networking is working, then ensure the ftp binary is present.
Alternatively, try it again to see if there was some transient network problem.

I have checked my dns settings and my ping is good. I tried "Changing read Timeout in File "extensions_thebrig_tarballs.php" from 10 to 100 worked(Line 79)" as per korls respones to this error but to no avail. Im not sure how to "ensure ftp binary is present"??

I'm stuck.... not to sure where to go from here. Any help would be awesome.

Posted: **12 Aug 2015 16:46**

Hi Alexey123,

Try a long time to find how to define the node. Subsequently, find the following:

add path ‘cua*’ unhide

Now Hylafax find the modem device. Thanks a lot.

Posted: **15 Aug 2015 16:06**

HeinzHeinze wrote:My problem is, I don't know, where to find them, or how to edit them exactly?

Bad luck

may be you should better to stay a little bit on nas4free 9.3 and previous TheBrig version? Alexey is polishing The Brig (as yo see from his reply), but he has not much free time for it...

Posted: **18 Aug 2015 18:31**

MikeMac wrote:
HeinzHeinze wrote:My problem is, I don't know, where to find them, or how to edit them exactly?
Bad luck

may be you should better to stay a little bit on nas4free 9.3 and previous TheBrig version? Alexey is polishing The Brig (as yo see from his reply), but he has not much free time for it...

got the jail now running. Did a fresh install of the OS and everything and voila. Don't know why but it works now.

Thank you anyway.

Also big thanks to alexey

Posted: **25 Aug 2015 01:21**

Hello,
i have a problem with my jails network config under NAS4FREE 10.1.0.2 - Prescience (revision 1761) and thebrig alcatraz 0.91 .
Here is my ifconfig report and the jls.
Has you can see, the jails broadcast are the jail ip adresse, not 192.168.1.255, has my nas4free (192.168.1.51)

Code: Select all

mynas: /jails # ifconfig
vr0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=82808<VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
        ether 00:50:ba:0e:3f:0d
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=c011a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,VLAN_HWTSO,LINKSTATE>
        ether 00:19:21:50:44:21
        inet 192.168.1.51 netmask 0xffffff00 broadcast 192.168.1.255
        inet 192.168.1.202 netmask 0xffffffff broadcast 192.168.1.202
        inet 192.168.1.203 netmask 0xffffffff broadcast 192.168.1.203
        inet 192.168.1.201 netmask 0xffffffff broadcast 192.168.1.201
        inet 192.168.1.100 netmask 0xffffffff broadcast 192.168.1.100
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex,flowcontrol,rxpause,txpause>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
mynas: /jails # jls
   JID  IP Address      Hostname                      Path
     9  192.168.1.202   upnp.local                    /jails/upnp
    10  192.168.1.203   series.local                  /jails/series
    11  192.168.1.201   mysql.local                   /jails/mysql
    12  192.168.1.100   transmission.local            /jails/transmission

I have using ifconfig

Code: Select all

ifconfig msk0 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255 alias
ifconfig msk0 192.168.1.201 netmask 0xffffff00 broadcast 192.168.1.255 alias
ifconfig msk0 192.168.1.202 netmask 0xffffff00 broadcast 192.168.1.255 alias
ifconfig msk0 192.168.1.203 netmask 0xffffff00 broadcast 192.168.1.255 alias

but the jails lost network (no pkg works, my serviio don't work after this command).
Can you insert this in your launcher if it can be set.
Here is what appen when i stop my jails

Code: Select all

mynas: /jails # /etc/rc.d/thebrig onestop
Stopping jails: upnp Stopping cron.
Waiting for PIDS: 6952.
Terminated
.
upnp: removed
ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address
jail: upnp: /sbin/ifconfig msk0 inet 192.168.1.202 netmask 255.255.255.255 -alias: failed
series Stopping cron.
Waiting for PIDS: 7145.
.
Terminated
series: removed
ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address
jail: series: /sbin/ifconfig msk0 inet 192.168.1.203 netmask 255.255.255.255 -alias: failed
mysql Stopping cron.
Waiting for PIDS: 7270.
Terminated
.
mysql: removed
ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address
jail: mysql: /sbin/ifconfig msk0 inet 192.168.1.201 netmask 255.255.255.255 -alias: failed
transmission Stopping cron.
Waiting for PIDS: 7414.
.
Terminated
transmission: removed
ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address
jail: transmission: /sbin/ifconfig msk0 inet 192.168.1.100 netmask 255.255.255.255 -alias: failed

Many thanks for your very good job
PS: when the broadcast is not set, my jails lost network after 1 day. And sorry for my poor english (The french people can't learn another langage ^_^ )

Posted: **29 Aug 2015 14:53**

I can only follow simple instructions, (I don't really understand the workings and the commands), so I simply followed the three steps from the start post, but after step 3 I get this error:

$ /bin/sh /tmp/thebrig_install.sh /mnt/WD50Red/Brig/Jail 2
Attempting to create a new destination directory.....
Retrieving the testing branch as a zip file
Unpacking the tarball...
X-Powered-By: PHP/5.6.12
Content-type: text/html; charset=UTF-8

Parse error: syntax error, unexpected '!' in /bin/sh on line 322
You use fresh version

Anyone got a clue why this could be?
(using 10.2.0.2 - Prester (revision 1810), x64 embedded)
I did notice a folder named 'Jail' (but not 'Jail 2' ?) was created in the above 'Brig' folder, containing a txt file saying "TheBrig installer!: installer: successfully"

edit:
To give some additional info, I have also tried this a few weeks ago wile I was on 10.1. Then I could also not get it to work (also tried the "TheBrig Jail Manager Full Offline Installer") I then gave up after many trials and efforts.
I hope I didn't 'break' anything at those efforts, which might be a reason for the current error?

Posted: **02 Sep 2015 19:18**

Please ignore, I'm an idiot and wasn't logged in as root when I tried to install! Working great now.

Hey all, have been getting started with N4F and am in the process of installing TheBrig Alcatraz so I can have more security with Transmission and Owncloud. However, when I go to install TheBrig per instructions, it gets to "Detecting current configuration" and hangs, I've given it ~1 hour on several occasions, but no dice. Any thoughts on what I might be doing wrong? Commands are as follows:

Code: Select all

$ fetch https://raw.githubusercontent.com/fsbruva/thebrig/alcatraz/thebrig_install.sh
thebrig_install.sh                            100% of 7761  B   64 MBps 00m00s
$ chmod a+x thebrig_install.sh
$ /bin/sh thebrig_install.sh /mnt/pool_1/Jail 3
Attempting to create a new destination directory.....
Retrieving the unstable branch as a zip file
If you aren't a developer for TheBrig, is a bad idea!
Please re-install according to the documentation...
alcatraz.zip                                  100% of  144 kB  690 kBps 00m00s
Unpacking the tarball...
Done!
Detecting current configuration...

Posted: **03 Sep 2015 15:57**

Hello all,

I resubmit this post in this forum - I previously did in the wrong place.

So, I am usin alcatraz release and it seems that stopping a vnet jail does not delete the bridge interface, is this normal?

ifconfig output:
em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO>
ether 18:03:73:e8:1a:e6
inet 192.168.1.14 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bridge20: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:24:e0:3a:c4:14
inet 192.168.1.251 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=1<PERFORMNUD>
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: em0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 20000

nas4free: ~# jls
JID IP Address Hostname Path

Thanks !
BR
Fozzy

Posted: **04 Sep 2015 06:05**

Hey guys - I have several vnet jails, under reasonable load but nothing excessive.

I notice that if the jails have been running for a significant time (say a few weeks), occasionally when I restart a jail using the GUI, the host reboots. I am suspicious that I am squeezing the RAM too much:
ram = 10G
vm.kmem_size = 9G
vfs.zfs.arc_max = 8G

However I have 4G of swap configured and it never seems to be used.

The reason I am suspicious is that ZFS ARC warms up over time which would explain why the jails don't initially fail if reset, but who knows.

Has anyone else noticed this behaviour?

Posted: **04 Sep 2015 06:12**

fozzy38 wrote: So, I am usin alcatraz release and it seems that stopping a vnet jail does not delete the bridge interface, is this normal?

hey Fozzy,

As you can see in your ifconfig output, the bridge still has a member, the physical interface. I think having the bridge remain even though all bridges are stopped is acceptable behaviour.

I guess the question are you just stopping the jail or are you deleting the jail as well?

Posted: **08 Sep 2015 02:59**

Another bug I think.

Guys I've just noticed that I have repeated MAC addresses across two of my bridges.

Ifconfig for host:

Code: Select all

epair5a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:ff:00:00:07:0a
	inet6 fe80::ff:ff:fe00:70a%epair5a prefixlen 64 scopeid 0x7 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
	status: active
epair4a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:ff:00:00:08:0a
	inet6 fe80::ff:ff:fe00:80a%epair4a prefixlen 64 scopeid 0x8 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
	status: active
epair3a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:ff:00:00:09:0a
	inet6 fe80::ff:ff:fe00:90a%epair3a prefixlen 64 scopeid 0x9 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
	status: active

Ifconfig for jails:

Code: Select all

epair5b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:ff:50:00:09:0b
	inet6 fe80::ff:50ff:fe00:90b%epair5b prefixlen 64 duplicated scopeid 0x2 
	inet 192.168.5.25 netmask 0xffffff00 broadcast 192.168.5.255 
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
	status: active
	
epair4b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:ff:50:00:09:0b
	inet6 fe80::ff:50ff:fe00:90b%epair4b prefixlen 64 scopeid 0x2 
	inet 192.168.5.24 netmask 0xffffff00 broadcast 192.168.5.255 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
	status: active
	
epair3b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:ff:50:00:0a:0b
	inet6 fe80::ff:50ff:fe00:a0b%epair3b prefixlen 64 scopeid 0x2 
	inet 192.168.5.23 netmask 0xffffff00 broadcast 192.168.5.255 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
	status: active

You can see that the mac address for epair5b and epair4b are both 02:ff:50:00:09:0b. Now this does not look like a sensible situation, however I have not had any problems, because I am only using IPv4, and therefore these mac addresses only have local significance within each jail.

However for a user using IPv6, the IPv6 addresses are based on the MAC and are therefore are also duplicates.

If you need help to diagnose the cause - please ask.

Brendan

Posted: **08 Sep 2015 03:29**

jmarc wrote:Hello,
i have a problem with my jails network config under NAS4FREE 10.1.0.2 - Prescience (revision 1761) and thebrig alcatraz 0.91 .
Here is my ifconfig report and the jls.

I believe the problem is that your jails configurations with the brig are problematic, and they are what is read by the onestart command. The problem is that you have put an incorrect value in the "jail network setting / in jail field". It looks like you have used a /32 subnet.

So go into each jail and configure the following in that "In Jail" field - note the /24 :

upnp = 192.168.1.202/24
series = 192.168.1.203/24
mysql = 192.168.1.204/24
transmission = 192.168.1.205/24

You probably will need to delete the alias addresses:

Code: Select all

ifconfig msk0 192.168.1.100 -alias

etc:

Then try the onerestart and see what happens.

Posted: **09 Sep 2015 14:17**

Parkcomm wrote:
fozzy38 wrote: So, I am usin alcatraz release and it seems that stopping a vnet jail does not delete the bridge interface, is this normal?
hey Fozzy,

As you can see in your ifconfig output, the bridge still has a member, the physical interface. I think having the bridge remain even though all bridges are stopped is acceptable behaviour.

I guess the question are you just stopping the jail or are you deleting the jail as well?

Hey Parkcomm,
thanks for your reply, I only stopped the jail in fact, not deleting it.

Posted: **16 Sep 2015 18:56**

Parkcomm wrote:
jmarc wrote:Hello,
i have a problem with my jails network config under NAS4FREE 10.1.0.2 - Prescience (revision 1761) and thebrig alcatraz 0.91 .
Here is my ifconfig report and the jls.
...
So go into each jail and configure the following in that "In Jail" field - note the /24 :

upnp = 192.168.1.202/24
series = 192.168.1.203/24
mysql = 192.168.1.204/24
transmission = 192.168.1.205/24
...
Then try the onerestart and see what happens.

Hi Parkcomm,
i do this correction, i have onerestarted my jails, and .... it is good ^_^

Many thanks for your help.

Posted: **17 Sep 2015 03:39**

My pleasure

Posted: **18 Sep 2015 16:42**

Hello,
I tried to install thebrig but I have "operation time out" after this first line in ssh...
"fetch https://raw.githubusercontent.com/fsbru ... install.sh"
It seem's that I made something wrong

Can you help me ?

Posted: **20 Sep 2015 17:54**

HeinzHeinze wrote:But I still don't know how to get the right version. Following the instructions of the initial post of this thread and using the install skript I still seem to get the wrong version of thebrig.
I also could not find a link or anything for the newest zip-file on github, which the install skript tries to fetch. From a look at the install skript I got the idea of using different options for the "working", "alexey" and "master" zip. But non worked right and I always got the same error in the NAs4free GUI when klicking on TheBrig.
Code: Select all
Warning: require_once(XML/Serializer.php): failed to open stream: No such file or directory in /usr/local/www/ext/thebrig/extensions_thebrig.php on line 10 Fatal error: require_once(): Failed opening required 'XML/Serializer.php' (include_path='.:/etc/inc:/usr/local/www') in /usr/local/www/ext/thebrig/extensions_thebrig.php on line 10
If someone could please give new instructions or update the install skript? Would be very kind.

Thanks so far

Has TheBrig team figured this out? I upgraded NAS4Free to 10.2, and now I can't access TheBrig to update it. Do I need to reinstall it, or is there a command-line update tool I can use?

Posted: **24 Sep 2015 08:53**

Hey Alexy - another bug (I think)

I just tried to set up a new jail based on a template - TheBrig|Jail|Add|Jail Source->From Template does not give any options to select a template (I have one tarball in the templates folder)

Happy to provide any further detail

Posted: **29 Sep 2015 02:58**

I am having trouble setting up a proper Jail in the brig can someone please post how to set it up. I have read the posts containing the new Alcatraz but It does not see to be effective.

Thanks

Posted: **29 Sep 2015 12:17**

EasyStorin' wrote:
Has TheBrig team figured this out? I upgraded NAS4Free to 10.2, and now I can't access TheBrig to update it. Do I need to reinstall it, or is there a command-line update tool I can use?

Search for the skript to install "alcatraz". It is some way up the thread (I guess). Or go to
viewtopic.php?f=79&t=9383
and find the updated skript for N4F 10 there.
(Sorry I don't know better advise. Maybe you have to setup your jails again... But there might be an other solution I don't know.)

Posted: **29 Sep 2015 13:18**

EasyStorin' wrote:
HeinzHeinze wrote:But I still don't know how to get the right version. Following the instructions of the initial post of this thread and using the install skript I still seem to get the wrong version of thebrig.
I also could not find a link or anything for the newest zip-file on github, which the install skript tries to fetch. From a look at the install skript I got the idea of using different options for the "working", "alexey" and "master" zip. But non worked right and I always got the same error in the NAs4free GUI when klicking on TheBrig.
Code: Select all
Warning: require_once(XML/Serializer.php): failed to open stream: No such file or directory in /usr/local/www/ext/thebrig/extensions_thebrig.php on line 10 Fatal error: require_once(): Failed opening required 'XML/Serializer.php' (include_path='.:/etc/inc:/usr/local/www') in /usr/local/www/ext/thebrig/extensions_thebrig.php on line 10
If someone could please give new instructions or update the install skript? Would be very kind.

Thanks so far
Has TheBrig team figured this out? I upgraded NAS4Free to 10.2, and now I can't access TheBrig to update it. Do I need to reinstall it, or is there a command-line update tool I can use?

I am having the same problem. It appears to install fine but when clicking on the new TheBrig tab under Extensions, that error comes up.

EDIT: Got it working simply enough by using the offline installer viewtopic.php?f=71&t=8871

Posted: **06 Oct 2015 15:44**

i just came back to nas4free from ubuntu server going to setup dlna plex server and now im having problems installing the brig. here is my putty window during installation:

Code: Select all

 nas4free: ~# fetch -o /tmp/thebrig_install.sh https://github.com/fsbruva/thebrig/raw/working/thebrig_install.sh
/tmp/thebrig_install.sh                       100% of 4053  B   25 MBps 00m00s
 nas4free: ~# chmod a+x /tmp/thebrig_install.sh
 nas4free: ~# /bin/sh /tmp/thebrig_install.sh /mnt/pnas/Jail 2
Attempting to create a new destination directory.....
Retrieving the testing branch as a zip file
fetch: https://github.com/fsbruva/thebrig/archive/working.zip: size of remote file is not known
working.zip                                            248 kB   40 kBps 00m06s
Unpacking the tarball...
x README
x conf/
x conf/bin/
x conf/bin/change_ver.php
x conf/bin/ftp_amd64
x conf/bin/ftp_i386
x conf/bin/jail.sh
x conf/bin/thebrig_fetch.sh
x conf/bin/thebrig_ports_cron.php
x conf/bin/thebrig_start.php
x conf/bin/thebrig_start.sh
x conf/bin/thebrig_stop.sh
x conf/bin/thebrig_update_cron.php
x conf/ext/
x conf/ext/thebrig/
x conf/ext/thebrig/extensions_thebrig.php
x conf/ext/thebrig/extensions_thebrig_check.php
x conf/ext/thebrig/extensions_thebrig_config.php
x conf/ext/thebrig/extensions_thebrig_download.php
x conf/ext/thebrig/extensions_thebrig_edit.php
x conf/ext/thebrig/extensions_thebrig_fstab.php
x conf/ext/thebrig/extensions_thebrig_log.php
x conf/ext/thebrig/extensions_thebrig_manager.php
x conf/ext/thebrig/extensions_thebrig_ports.php
x conf/ext/thebrig/extensions_thebrig_tarballs.php
x conf/ext/thebrig/extensions_thebrig_tools.php
x conf/ext/thebrig/extensions_thebrig_update.php
x conf/ext/thebrig/fstab.png
x conf/ext/thebrig/functions.inc
x conf/ext/thebrig/lang.inc
x conf/ext/thebrig/menu.inc
x conf/ext/thebrig/off_small.png
x conf/ext/thebrig/on_small.png
x conf/freebsd-update.conf
x conf/freebsd-update_thin.conf
x conf/make.conf
x conf/periodic.conf
x conf/portsnap.conf
x conf/sbin/
x conf/sbin/freebsd-update
x conf/sbin/portsnap
x thebrig_install.sh

Warning: file(/var/tmp/temporary/conf/ext/thebrig/lang.inc): failed to open stre                      am: No such file or directory in /root/temporary/conf/bin/change_ver.php on line                       6
Hello new user, We will install TheBrig now
Renaming 64 bit ftp binary
Congratulations! Thebrig installed . Navigate to rudimentary config tab and push                       Save
rmdir: temporary: No such file or directory

im not that great at BSD but am getting better i learned ubuntu pretty well and i write c++ so i understand syntax im sure its something dumb but let me know if you can help thank you in advance

Posted: **07 Oct 2015 13:20**

How do I uninstall the Brig?

XigmaNAS

[HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F

Re: [HOWTO] Install TheBrig - one Jail manager for N4F