[HOWTO] Install TheBrig - one Jail manager for N4F

[alexey123]

TheBrig console commands:
service thebrig (start|stop|restart) JAILNAME
service thebrig (rcvar|enabled)

Added today
service thebrig list - show started jails
service thebrig listall - show all configured jails
service thebrig startonboot - show jails which must start with main system, value thebrig_list some as jail_list.

[pierouelle]

TheBrig console commands:
service thebrig (start|stop|restart) JAILNAME
service thebrig (rcvar|enabled)

Added today
service thebrig list - show started jails
service thebrig listall - show all configured jails
service thebrig startonboot - show jails which must start with main system, value thebrig_list some as jail_list.

What do you mean by console, Putty, CLI terminal on the server, webgui advanced command...

[raulfg3]

What do you mean by console, Putty, CLI terminal on the server, webgui advanced command...

all.

console=shell

[pierouelle]

thanks sir have a wonderfull day

[pierouelle]

Code: Select all

 nas4free: ~# service thebrig list
/etc/rc.d/thebrig: unknown directive 'list'.
Usage: /etc/rc.d/thebrig [fast|force|one|quiet](start|stop|restart|rcvar|enabled)

Unknown directive list ???

[alexey123]

Update your thebrig now
Then reboot server

[pierouelle]

Update your thebrig now
Then reboot server

Thank you Sir, that did it, have a wonderful day, and thanks for your hard work

[mamisano]

I just went to install this and Github is literally down...Total site outage.

[sene4kin]

Hello there! I have a little problem with starting jails on boot. I ticked "start current jail automatically with main system" but it doesn't start unless i do it manually. if i tick "Allow start all jails" - i starts automatically BUT i can't stop jails eversince(

[alexey123]

Hello there! I have a little problem with starting jails on boot. I ticked "start current jail automatically with main system" but it doesn't start unless i do it manually. if i tick "Allow start all jails" - i starts automatically BUT i can't stop jails eversince(

I check now - for me work

Add to rc.conf ( over System|Advanced|rc.conf page ) values
rc_debug="YES"
rc_info="YES"

for troubleshoot.
And observe system log messages.

[sene4kin]

Ok, jail stops working after i do reassign DHCP address or the router swtitches off-on. So the working jail can't be stopped then and doesn't work.

Code: Select all

Date & Time	Who	Event
Jan 28 22:30:33	owncloud newsyslog[5578]	: logfile first created
Jan 28 22:30:33	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 28 22:31:55	owncloud pkg-static	: pkg-1.6.2 installed
Jan 28 22:32:07	owncloud pkg	: indexinfo-0.2.4 installed
Jan 28 22:32:07	owncloud pkg	: gettext-runtime-0.19.6 installed
Jan 28 22:32:08	owncloud pkg	: nano-2.4.3 installed
Jan 28 22:34:16	owncloud syslogd	: exiting on signal 15
Jan 28 22:35:53	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 28 23:16:55	owncloud pkg	: xproto-7.0.28 installed
Jan 28 23:16:55	owncloud pkg	: libxml2-2.9.3 installed
Jan 28 23:16:55	owncloud pkg	: libXdmcp-1.1.2 installed
Jan 28 23:16:55	owncloud pkg	: libpthread-stubs-0.3_6 installed
Jan 28 23:16:55	owncloud pkg	: libXau-1.0.8_3 installed
Jan 28 23:16:56	owncloud pkg	: libICE-1.0.9_1,1 installed
Jan 28 23:16:56	owncloud pkg	: libxcb-1.11.1 installed
Jan 28 23:16:56	owncloud pkg	: kbproto-1.0.7 installed
Jan 28 23:16:56	owncloud pkg	: libSM-1.2.2_3,1 installed
Jan 28 23:16:56	owncloud pkg	: libX11-1.6.3,1 installed
Jan 28 23:16:56	owncloud pkg	: xextproto-7.3.0 installed
Jan 28 23:16:57	owncloud pkg	: libXt-1.1.5,1 installed
Jan 28 23:16:57	owncloud pkg	: libXext-1.3.3_1,1 installed
Jan 28 23:16:57	owncloud pkg	: printproto-1.0.5 installed
Jan 28 23:16:57	owncloud pkg	: pcre-8.37_4 installed
Jan 28 23:16:57	owncloud pkg	: libXpm-3.5.11_4 installed
Jan 28 23:16:57	owncloud pkg	: libXmu-1.1.2_3,1 installed
Jan 28 23:16:57	owncloud pkg	: libXp-1.0.3,1 installed
Jan 28 23:16:57	owncloud pkg	: php56-5.6.17 installed
Jan 28 23:16:57	owncloud pkg	: ca_root_nss-3.20.1 installed
Jan 28 23:16:57	owncloud pkg	: libXaw-1.0.13,2 installed
Jan 28 23:16:57	owncloud pkg	: libedit-3.1.20150325_1 installed
Jan 28 23:16:57	owncloud pkg	: php56-mysql-5.6.17 installed
Jan 28 23:16:57	owncloud pkg	: php56-pdo-5.6.17 installed
Jan 28 23:16:57	owncloud pkg	: php56-xml-5.6.17 installed
Jan 28 23:16:58	owncloud pkg	: curl-7.46.0_1 installed
Jan 28 23:16:58	owncloud pkg	: png-1.6.20 installed
Jan 28 23:16:58	owncloud pkg	: t1lib-5.1.2_4,1 installed
Jan 28 23:16:58	owncloud pkg	: freetype2-2.6.2 installed
Jan 28 23:16:58	owncloud pkg	: jpeg-turbo-1.4.2 installed
Jan 28 23:16:58	owncloud pkg	: libiconv-1.14_9 installed
Jan 28 23:16:58	owncloud pkg	: oniguruma5-5.9.6_1 installed
Jan 28 23:16:58	owncloud pkg	: sqlite3-3.9.2 installed
Jan 28 23:16:58	owncloud pkg	: libltdl-2.4.6 installed
Jan 28 23:16:58	owncloud pkg	: libmcrypt-2.5.8_3 installed
Jan 28 23:16:58	owncloud pkg	: libzip-1.0.1 installed
Jan 28 23:16:59	owncloud pkg	: mysql56-client-5.6.27 installed
Jan 28 23:17:01	owncloud pkg	: perl5-5.20.3_8 installed
Jan 28 23:17:01	owncloud pkg	: lighttpd-1.4.38 installed
Jan 28 23:17:01	owncloud pkg	: php56-openssl-5.6.17 installed
Jan 28 23:17:01	owncloud pkg	: php56-ctype-5.6.17 installed
Jan 28 23:17:01	owncloud pkg	: php56-curl-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-dom-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-fileinfo-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-filter-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-gd-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-hash-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-iconv-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-json-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-mbstring-5.6.17_1 installed
Jan 28 23:17:02	owncloud pkg	: php56-pdo_mysql-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-pdo_sqlite-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-session-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-simplexml-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-sqlite3-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-xmlrpc-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-xmlwriter-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-gettext-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-mcrypt-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-zip-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-zlib-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: php56-posix-5.6.17 installed
Jan 28 23:17:02	owncloud pkg	: mp3info-0.8.5 installed
Jan 28 23:17:05	owncloud pkg	: mysql56-server-5.6.27 installed
Jan 28 23:17:05	owncloud pkg	: pecl-APCu-4.0.10 installed
Jan 29 18:03:26	owncloud syslogd	: exiting on signal 15
Jan 29 18:08:49	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 18:29:06	owncloud syslogd	: exiting on signal 15
Jan 29 18:32:54	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 18:36:26	owncloud syslogd	: exiting on signal 15
Jan 29 18:43:00	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 18:45:25	owncloud syslogd	: exiting on signal 15
Jan 29 18:51:30	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 18:51:51	owncloud syslogd	: exiting on signal 15
Jan 29 18:52:31	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 18:55:06	owncloud syslogd	: exiting on signal 15
Jan 29 18:58:58	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 19:25:35	owncloud syslogd	: exiting on signal 15
Jan 29 19:34:04	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 19:40:45	owncloud syslogd	: exiting on signal 15
Jan 29 21:21:12	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 21:23:19	owncloud syslogd	: exiting on signal 15
Jan 29 21:29:25	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 21:40:54	owncloud syslogd	: exiting on signal 15
Jan 29 21:46:43	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 22:47:23	owncloud syslogd	: exiting on signal 15
Jan 29 22:57:57	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 22:59:38	owncloud syslogd	: exiting on signal 15
Jan 29 23:04:17	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 23:24:49	owncloud syslogd	: exiting on signal 15
Jan 29 23:32:29	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 23:34:58	owncloud syslogd	: exiting on signal 15
Jan 29 23:48:47	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 23:49:17	owncloud syslogd	: exiting on signal 15
Jan 29 23:49:23	owncloud syslogd	: kernel boot file is /boot/kernel/kernel
Jan 29 23:50:40	owncloud syslogd	: exiting on signal 15

[alexey123]

I solve conflict with virtualbox

Thebrig not more use file /etc/devfs.rules for devfs rules. Ut use file called as conf/devfs.rules under thebrig folder.
Jails rulesets numbers calculated as 100 + jailnumber



Update procedure:
1 Navigate to Extensions|TheBrig|Managernd push Update
2. When Thebrig is updated, navigate to Extensions|TheBrig ( main page ) and push Save button

I begin try to attach bhyve to thebrig

[sene4kin]

Hm, i guess i did what you said (update and save), and after reboot and renewing DHCP address (by pressing "2" on the server Main console) while working jail - it stops and dies untill the next reboot. On your commands above i receive error:

[sene4kin]

I forgot i hadn't ticked "Enable mount procfs" and "Enable mount fdescfs" in the jail settings. But it hasn't made a difference though(

[alexey123]

Apply some for 9.3 based

[durakotherealj]

Hellou everybody i have not a real problem but it's very problematic i installed Nas4Free 10.2.0.2(2268) the brig all good but the problem is when y touch query and mark the base and lib32 for download never never start the download please somebady now how download using the terminal or something for do that.
thnks very much

[sene4kin]

press Fetch and refresh the page - you will see download progress bars. Once downloaded you will see it above.

[durakotherealj]

I fixed it, the problem is that i dont have allow this ftp server i dont know what but i think my isp but i download manual and i put in work directory and it put the package in Custom Flavor (Homegrown) but now it's working thnks anyway
greeting from Cuba

[sene4kin]

So, still no fix for my issue? I tried uninstalling it from gui and installing from scratch still no effect( it's very sad 'cause it makes no sense using it like this(

[alexey123]

I add command troubleshoot for view error at jail start|create stage.
format:

Code: Select all

/etc/rc.d/thebrig troubleshoot JAILNAME

or

Code: Select all

service troubleshoot JAILNAME

If type command without JAILNAME, script will inspect in jails, defined as start on boot

[arinci]

I'm trying to update my two jails trough the "Update" -> "FreeBSD Update" page of "The Brig". First of all I select both two jails and then push "Fetch" button. After a few seconds I obtain the following Results log:

Code: Select all

src component not installed, skipped
Looking up update.FreeBSD.org mirrors... none found.
Fetching metadata signature for 10.2-RELEASE from update.FreeBSD.org... done.
Fetching metadata index... done.
Inspecting system... done.
Preparing to download files... done.

The following files will be updated as part of updating to 10.2-RELEASE-p12:
/usr/lib32/libc.a
/usr/lib32/libc.so.7
/usr/lib32/libc_p.a
/usr/lib32/libc_pic.a
/usr/lib32/libcrypto.a
/usr/lib32/libcrypto.so.7
/usr/lib32/libcrypto_p.a
/usr/lib32/libssl.a
/usr/lib32/libssl.so.7
/usr/lib32/libssl_p.a
/var/db/etcupdate/log
/var/db/mergemaster.mtree

Everythings seems ok, also the column "Downloaded Version" is correctly filled with "10.2-RELEASE-p12" for both two jails.

The problem is related to the "Install" phase: after a few seconds after having pushed the "Install" button I obtain the following results:

Code: Select all

src component not installed, skipped
Installing updates...Could not create kernel backup directory

Can anybody give me a little help to solve this? Thanks!!!

[ernie]

Hello

I installed thebrig alcatraz on 10.2.0.2 - Prester (revision 2332).

I created a jail and I installed owncloud in the jail.

My issue is:
- I stopped the jail with the button 'stop'
- I modified fstab in the parameter of the jail
- then I try to click on the button 'start' but the button is not activated now

The first launch of the jail after the creation works with the start button. But it seems that after the button is not activated

Any solution ? Is there a command line in order to launch the jail ?

Thanks for your help

[alexey123]

TheBt\rig have problems with revision 2332.
Wait, I'll fix it

[ernie]

OK
Thanks

[jay610]

Hi alexey,

Thanks for your great work. There has been some interest in potentially running a VPN inside a jail, which you had said previously you would look at incorporating this capability into The Brig for future versions. Is this still on the roadmap? If so, any update on progress?

Thanks

[jistme]

TheBt\rig have problems with revision 2332.
Wait, I'll fix it

Hey alexey123,

So there is some issue with TheBrig running on 2332?
Could my troubles not getting ownCloud working with these versions be related to that?
viewtopic.php?f=79&t=9383&start=60#p65955

[Oupsman]

Hello,

I'm trying to setup the brig on my brand new nas4free box and here is the result :

Code: Select all

 nas4free: ~# cd /mnt/STANDARD/thebrig/
 nas4free: thebrig# ls
temporary
 nas4free: thebrig# /tmp/thebrig_install.sh /mnt/PERF/minecrafts 2
+ procstat -f 22924
+ basename /tmp/thebrig_install.sh
+ grep -E '/thebrig_install.sh$'
+ STAT='22924 sh                  10 v r r-------  1    1024 -   /var/tmp/thebrig_install.sh'
+ echo 22924 sh 10 v r r------- 1 1024 - /var/tmp/thebrig_install.sh
+ sed -r 's/^([^\/]+)\//\//1'
+ FULL_PATH=/var/tmp/thebrig_install.sh
+ dirname /var/tmp/thebrig_install.sh
+ sed 's|/thebrig_install.sh||'
+ START_FOLDER=/var/tmp
+ echo /var/tmp
+ [ ! -z /mnt/PERF/minecrafts ]
+ BRIG_ROOT=/mnt/PERF/minecrafts
+ [ ! -d /mnt/PERF/minecrafts ]
+ mkdir -p temporary
+ cd temporary
+ uname -r
+ cut -d- -f1
+ cut -d. -f1
+ MAJ_REL=10
+ uname -r
+ cut -d- -f1
+ cut -d. -f2
+ MIN_REL=2
+ [ 10 -lt 10 ]
+ BRANCHNAME=alcatraz
+ fetch https://github.com/fsbruva/thebrig/archive/alcatraz.zip
alcatraz.zip                                  100% of  145 kB  493 kBps 00m00s
+ echo 'Unpacking the tarball...'
Unpacking the tarball...
+ tar -xf alcatraz.zip '--exclude=.git*' --strip-components 1
+ echo Done!
Done!
+ rm alcatraz.zip
+ /usr/local/bin/php-cgi -f conf/bin/change_ver.php

Warning: file(/var/tmp/install_stage/conf/ext/thebrig/lang.inc): failed to open stream: No such file or directory in /mnt/STANDARD/thebrig/temporary/conf/bin/change_ver.php on line 49
Hello, we will begin installing TheBrig now 
+ filever=/tmp/thebrigversion
+ [ -f /tmp/thebrigversion ]
+ echo 'You use fresh version'
You use fresh version
+ cd /var/tmp
+ rm -Rf 'temporary/*'
+ rmdir temporary
rmdir: temporary: No such file or directory
+ rm /tmp/thebriginstaller
+ [ -f '' ]
+ date -j '+%Y-%m-%d %H:%M:%S'
+ currentdate='2016-03-05 08:03:50'
+ echo '[2016-03-05 08:03:50]: TheBrig installer!: installer:  successfully'

Do anybody else have this problem ?

I'll try diging around a little bit and post my results here.

[Oupsman]

Ok, I've figured that out :

first of all, the tutorial is wrong : you must copy the installation script in the directory where you want to install The brig, and not in /tmp.

Then, in the change_ver.php, I've replaced install_stage by temporary and now the script seems to run fine :

Code: Select all

 nas4free: minecrafts# ./thebrig_install.sh /mnt/PERF/minecrafts
+ procstat -f 2457
+ basename ./thebrig_install.sh
+ grep -E '/thebrig_install.sh$'
+ STAT=' 2457 sh                  10 v r r-------  1    1024 -   /mnt/PERF/minecrafts/thebrig_install.sh'
+ echo 2457 sh 10 v r r------- 1 1024 - /mnt/PERF/minecrafts/thebrig_install.sh
+ sed -r 's/^([^\/]+)\//\//1'
+ FULL_PATH=/mnt/PERF/minecrafts/thebrig_install.sh
+ dirname /mnt/PERF/minecrafts/thebrig_install.sh
+ sed 's|/thebrig_install.sh||'
+ START_FOLDER=/mnt/PERF/minecrafts
+ echo 'Start folder' /mnt/PERF/minecrafts
Start folder /mnt/PERF/minecrafts
+ echo /mnt/PERF/minecrafts
+ [ ! -z /mnt/PERF/minecrafts ]
+ BRIG_ROOT=/mnt/PERF/minecrafts
+ [ ! -d /mnt/PERF/minecrafts ]
+ mkdir -p temporary
+ cd temporary
+ uname -r
+ cut -d- -f1
+ cut -d. -f1
+ MAJ_REL=10
+ uname -r
+ cut -d- -f1
+ cut -d. -f2
+ MIN_REL=2
+ [ 10 -lt 10 ]
+ BRANCHNAME=alcatraz
+ fetch https://github.com/fsbruva/thebrig/archive/alcatraz.zip
fetch: https://github.com/fsbruva/thebrig/archive/alcatraz.zip: size of remote file is not known
alcatraz.zip                                           145 kB  106 kBps 00m02s
+ echo 'Unpacking the tarball...'
Unpacking the tarball...
+ echo Done!
Done!
+ rm alcatraz.zip
+ /usr/local/bin/php-cgi -f conf/bin/change_ver.php
Hello, we will begin installing TheBrig now
+ filever=/tmp/thebrigversion
+ [ -f /tmp/thebrigversion ]
+ echo 'You use fresh version'
You use fresh version
+ cd /mnt/PERF/minecrafts
+ [ -f '' ]
+ date -j '+%Y-%m-%d %H:%M:%S'
+ currentdate='2016-03-05 10:21:27'
+ echo '[2016-03-05 10:21:27]: TheBrig installer!: installer:  

But I can't see The Brig in the web interface. I think it's the bug you're investigating on now.

[arinci]

Anyone can help me?

I'm trying to update my two jails trough the "Update" -> "FreeBSD Update" page of "The Brig". First of all I select both two jails and then push "Fetch" button. After a few seconds I obtain the following Results log:

Code: Select all

src component not installed, skipped
Looking up update.FreeBSD.org mirrors... none found.
Fetching metadata signature for 10.2-RELEASE from update.FreeBSD.org... done.
Fetching metadata index... done.
Inspecting system... done.
Preparing to download files... done.

The following files will be updated as part of updating to 10.2-RELEASE-p12:
/usr/lib32/libc.a
/usr/lib32/libc.so.7
/usr/lib32/libc_p.a
/usr/lib32/libc_pic.a
/usr/lib32/libcrypto.a
/usr/lib32/libcrypto.so.7
/usr/lib32/libcrypto_p.a
/usr/lib32/libssl.a
/usr/lib32/libssl.so.7
/usr/lib32/libssl_p.a
/var/db/etcupdate/log
/var/db/mergemaster.mtree

Everythings seems ok, also the column "Downloaded Version" is correctly filled with "10.2-RELEASE-p12" for both two jails.

The problem is related to the "Install" phase: after a few seconds after having pushed the "Install" button I obtain the following results:

Code: Select all

src component not installed, skipped
Installing updates...Could not create kernel backup directory

Can anybody give me a little help to solve this? Thanks!!!

[Nostalgist92]

Do you have any plans on being able to create a jail via console commands?
Or are you able to already and i just completely missed it? (My brain is fudge right now so a forum search wasn't much help lol)

Few of my scripts could utilize this feature if it isn't already available.. Especially the OwnCloud one!

Hi alexey,

Thanks for your great work. There has been some interest in potentially running a VPN inside a jail, which you had said previously you would look at incorporating this capability into The Brig for future versions. Is this still on the roadmap? If so, any update on progress?

Thanks

Also interested! Would loooove to go back to deluge in a jail rather than have it run in a VM!