This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

MAC Share

CIFS/SMB network sharing.
Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
I.am.meikle
NewUser
NewUser
Posts: 2
Joined: 25 Jun 2012 21:05
Status: Offline

MAC Share

Post by I.am.meikle »

Hi,

I have been using nas4Free for many years with no problems with an Ubuntu box as my desktop/client PC.
I have just moved to using a Mac as my desktop.

I am sharing files using CIFS/SMB which almost works, but I have the following issues.
  • When I view an image file on the NAS, the "created by" attribute is updated in the file. This does not happen when viewing images on the local Mac HD.
  • When I try and delete anything from the NAS I get "The operation can’t be completed because the item “IMG_8394.JPG” is in use."
The CIFS/SMB set up is:
Authentication=Local User
Max Protocol=SMB3
Map To Guest = Never

The share setup is:
Enable Guest Access = FALSE

I have a user on the NAS with the same username as I have on the Mac, but a different password defined. However I am not asked to enter a password when I connect to the share ??

It all seems a little strange.

Any ideas ?

Thanks
Ian

NAS4Free 10.2.0.2 (revision 1962) x64-embedded
GBT GBTUACPI AMD A4-3400 APU with Radeon(tm) HD Graphics 8192MiB RAM

OHCI (generic) USB controller XHCI (generic) USB 3.0 controller bus=5
hubaddr=1 port=4 devaddr=2 interface=0 ugen=ugen5.2 AMD Hudson-2
UDMA133 controller RTL8169S/8110S/8211 1000BASE-T media interface
bus=5 hubaddr=1 port=5 devaddr=3 interface=0 ugen=ugen5.3 EHCI
(generic) USB 2.0 controller
Top
Post Reply

Return to “CIFS/SMB (Samba)”