I am setting up a 9207 to operate with 10.2.0.2.2235
I've read that it's best to keep the firmware level matched to the FreeBSD driver level, but I do not know what the driver level is in this version.
(I've also read to avoid P20)
What Pxx firmware level do I want?
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
LSI SAS 9207-4i4e firmware/BIOS/driver set
-
asavage
- Starter
- Posts: 15
- Joined: 26 Jun 2012 23:32
- Location: Duvall, Wash., USA
- Contact:
- Status: Offline
LSI SAS 9207-4i4e firmware/BIOS/driver set
Regards,
Al S.
Al S.
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: LSI SAS 9207-4i4e firmware/BIOS/driver set
you want the same level as the driver.
see the dmesg output for the driver version.
see the dmesg output for the driver version.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
asavage
- Starter
- Posts: 15
- Joined: 26 Jun 2012 23:32
- Location: Duvall, Wash., USA
- Contact:
- Status: Offline
Re: LSI SAS 9207-4i4e firmware/BIOS/driver set
The driver version is 20, so I suppose I'm stuck using the P20 firmware.
Regards,
Al S.
Al S.