This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
QLogic 8442 10GbE Converged Ethernet Adapter support
-
selulven
- Starter
- Posts: 29
- Joined: 01 Jan 2016 20:47
- Status: Offline
QLogic 8442 10GbE Converged Ethernet Adapter support
I'm putting together a hardware list for a SAN server, and I was looking at 10 GbE NICs when I found the QLogic 8442 at a very affordable price. However, when I look at the FreeBSD compatibility list, only QLogic NetXtreme adapters are listed (which seem to be Broadcom based), so I was wondering if anyone has tried the QLogic 8400 series (or 3400 series) with FreeBSD/NAS4Free?
-
BodgeIT
- Starter
- Posts: 74
- Joined: 03 Jul 2012 17:39
- Location: London
- Status: Offline
Re: QLogic 8442 10GbE Converged Ethernet Adapter support
FWiW:
I just tried the QLogic SANblade QLE4060C - iSCSI Host Bus Network Adapter Gigabit.
Nothing doing.
I just tried the QLogic SANblade QLE4060C - iSCSI Host Bus Network Adapter Gigabit.
Nothing doing.
NAS4Free: 11.4.0.4 - (7682) amd64-embedded
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;
Storage: Raidz1(3x Toshiba N300 6TB), Raidz1(3x WD Red 3TB), UFS(1x 1TB) Utility disk, ZFS Cache(64Gb SSD)
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;
Storage: Raidz1(3x Toshiba N300 6TB), Raidz1(3x WD Red 3TB), UFS(1x 1TB) Utility disk, ZFS Cache(64Gb SSD)
-
selulven
- Starter
- Posts: 29
- Joined: 01 Jan 2016 20:47
- Status: Offline
Re: QLogic 8442 10GbE Converged Ethernet Adapter support
By "nothing doing", do you mean it didn't work?
It wasn't picked up by FreeBSD as an HBA? It seems this model wouldn't expose itself as a NIC, but knowing that QLogic isn't supported on the HBA side is valuable as well, if that's what you mean.
It wasn't picked up by FreeBSD as an HBA? It seems this model wouldn't expose itself as a NIC, but knowing that QLogic isn't supported on the HBA side is valuable as well, if that's what you mean.