[SOLVED]WOL does´t work

[Knappe]

Code: Select all

# apciconf -s3

ok --> stand-by mode but never wake up with a magic broadcast.


dmesg:

ACPI Error: [\134_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150515/dswload-219)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150515/psobject-233)

What does that mean ?

Code: Select all

# dmesg | grep acpi

acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
acpi0: cleared fixed power button status

ok ?


1st nic: RTL8111/8168B PCI Express Gigabit Ethernet controller

Code: Select all

# ifconfig -m re0

re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
capabilities=8399b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_UCAST,WOL_MCAST,WOL_MAGIC,LINKSTATE>
ether f0:79:59:e1:07:a7
inet 192.168.1.27 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
supported media:
media autoselect mediaopt flowcontrol
media autoselect
media 1000baseT mediaopt full-duplex,flowcontrol,master
media 1000baseT mediaopt full-duplex,flowcontrol
media 1000baseT mediaopt full-duplex,master
media 1000baseT mediaopt full-duplex
media 100baseTX mediaopt full-duplex,flowcontrol
media 100baseTX mediaopt full-duplex
media 100baseTX
media 10baseT/UTP mediaopt full-duplex,flowcontrol
media 10baseT/UTP mediaopt full-duplex
media 10baseT/UTP
media none

note: LED´s lights up during standby

2nd nic: I210 Gigabit Network Connection

Code: Select all

# ifconfig -m ibg0

igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO>
capabilities=507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO>
ether a0:36:9f:86:3f:b0
inet 192.168.1.24 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
supported media:
media autoselect
media 1000baseT
media 1000baseT mediaopt full-duplex
media 100baseTX mediaopt full-duplex
media 100baseTX
media 10baseT/UTP mediaopt full-duplex
media 10baseT/UTP

No WOL activated although I activated it on the card (see http://n4f.siftusystems.com/index.php/2 ... 814-141236) No LED´s flashing
Why ?

[b0ssman]

the intel driver for the i210 in freebsd does not support wol.

wol has a very low priority in freebsd development.

[Knappe]

but the Realtek nic won function does´t work either ?

[b0ssman]

does it work under linux?
wol under freebsd is in a sorry state. most of the time it doesnt work or it dosnt work correctly.

if you want this functionality a board with ipmi is the better solution.

[Knappe]

tested with ubuntu 15.10-desktop-amd64:
suspend --> works like a charm with both nic's !
hibernate --> suspend + restart --> does´t work (may be because of an live system)

Result of the test: problem is in N4F because no resume (after acpiconf -s3) for the Realtek nic is possible.
"wake on lan" option in Network/LAN enabled + sysctl dev.re.0.wake=1

Any ideas ?

[Knappe]

solved !

set in WebGUI System/Network/LAN Management the option 'Wake on Lan' to "WOL_MAGIC" (NOT TO "on" !) + reboot.
Send magic_packages via mobile app to the Realtek nic (which was defined as LAN Interface in N4F).

[ChriZathens]

Yeap....
I thought about posting this yesterday, because I've came across this in the past but forgot to post it....
Anyways, glad you found a solution.
Now you need to verify that when you shutdown the machine, it actually shuts down and does not reboot half of the times...(another side effect of poor WOL implementation in FreeBSD....)

[Knappe]

who will check why the monitor doesn´t wake up after S3 (works in Ubuntu) ?

[Veloce]

Thanks for the hint, I recently had to replace the motherbord of my humble NAS, from a Asrock FM2A85X to a BIOSTAR A68N-5745, as this was the only fast available to get the NAS back up again.
Although I had set the option in the BIOS/UEFI "PME wake up from S5" to enable, N4F refused to start with the old but still working Android "freenas 0.7" app.
Indeed the option under Network -> LAN management -> Wake on Lan to "ON" keeps rebooting the system after a shutdown, so not an option, however the "WOL_MAGIC" does do the trick