NAS4Free 10.2.0.2.2407 released (FreeBSD 10.2-RELEASE-P13)

[zoon01]

The NAS4Free Team is pleased to announce the release of version 10.2.0.2.2407

http://sourceforge.net/projects/nas4fre ... .0.2.2407/

Everyone can upgrade from NAS4Free version 9.3.0.2.1310 or Higher.

README & CHANGELOG

NAS4Free Upgrade from below 9.3.0.2.1310 is NOT possible!!!
=====================================================
Upgrading NAS4Free "Embedded" or "Full" from any version below 9.3.0.2.1310 by webgui or from
LiveCD/USB is problematic, due a new size of boot partition & partition layout.
Please download and save your NAS4Free config to a safe place and backup all files from second
partition if you use boot disk as data disk.
INSTALL FROM SCRATCH IS THE ONLY WAY!
After installation you can restore your config.
Sorry for inconvenience.
** ! Tools to write extracted embedded file are not supported ! **
You must use the liveusb/CD for it's first installation!!!.

Install from scratch notes
======================
** Embedded.img.xz is only for upgrades by WEBGUI, do not extract and write to any media! **

Download NAS4Free livecd or liveusb and boot from it.
The compressed LiveUSB.img.gz needs to be extracted before you can write it to usb media,
you can use it with Win32DiskImager or any other tool.
Press 9 for the install menu and perform an embedded installation.

Upgrade note:
============
You must associate CARP with physical interface explicitly after upgrading to 10.X. to 10.2.
You may need modifying your NFS and AFP share setting.
You may need modifying your ftp setting, no longer SSL is supported (only TLS).
Send Buffer Size/Receive Buffer Size in CIFS/SMB is changed to 128480 since 9.3.0.2.1375.
/var and /var/tmp size has changed.
After the upgrade please do make a new backup of your config System|Backup/Restore.

ZFS User note!
After upgrading, you must re-sync ZFS configuration from Disks|ZFS|Configuration|Synchronize.

Requirements
============
Embedded: 2GB CF/USB/SSD (NAS4free "Embedded" is Recommended Install)
Full: 4GB HDD/SSD (For developers and some advanced users, Not Recommended!)
Swap less: physical memory 2GB or higher needed.
With swap: physical memory 512MB + swap 512MB (swap 1024MB recommended).

*Note: LiveCD is not supported on swap mode except installation and upgrading.

BUILD 10.2.0.2.2407
=================
Changes:
- Upgrade to FreeBSD 10.2-RELEASE-P13.
- Add Mellanox ConnectX-2 EN driver module. (x64 only)
- Add Auxiliary parameters in Samba AD.
- Add bhyve and related files. (CLI only)
- Add hint.acpi_throttle.0.disabled="0", hint.p4tcc.0.disabled="0".
- Add dlna user and group.
- Add minidlna.
- Add VirtualBox with WebSocket VNC server. (x86 and x64 only)
- Add phpVirtualBox and noVNC(HTML5/WebSocket VNC client) for VM management.
- Add ability to mount exFAT disk.
- Add samba local group.
- Add ability to add tap device on bridge interface.
- Add console fonts and keymaps.
- Add keymap setting/restart WebGUI in console menu.
- Add quirk for Silicon Power 16GB and more.
- Add allow group when local users only mode on FTP service.
- Add RRDtool and related files.
- Add mapping DOS attributes on CIFS/SMB. (OFF by default)
- Add various daemon/utility/debug tools for future development.
- Add hosts allow on console menu.
- Add autoresize on SD image. (ARM only)
- Add sendmail_path to php.ini to use mail() function.
- Add auto start/stop VM. (virtualbox)
- Add syncthing and related user and group.
- Add a part of Xen dom0 edition.
- Add vfs.zfs.arc_max, vfs.zfs.arc_min, vfs.zfs.prefetch_disable.
- Add IPMItool needs ipmi_load enabled in System|Advanced|loader.conf.
- Add volblocksize on ZFS volume creation.
- Add volmode on ZFS volume.
- Add ability AFP compatibility per share.
- Add accept remote syslog message.
- Add disable compress same syslog message.
- Add gpart show on Diagnostics|Information|Partitions.
- Add function to enable SMART Monitoring of SMART capable & enabled devices on import.
- Add date/time format selection.
- Remove usesendfile on CIFS/SMB.
- Remove legacy disk aliases such as /dev/ad0.
- Change some WebGUI menus and update text strings.
- Change DSA private key to RSA private key on SSH service.
- Change ZFS pool info reflected from zpool list.
- Change Store DOS attributes to OFF by default.
- Change var/tmpfs size to 512MB/256MB.
- Change empty bridge is allowd.
- Change iscsi initiator. (iscontrol -> iscsictl)
- Upgrade bash 4.3 to patch 42.
- Upgrade isboot to 0.2.13.
- Upgrade tzdata to 2015g.
- Upgrade mDNSResponder to 576.30.4.
- Upgrade dmidecode to 3.0.
- Upgrade dialog to 1.2-20150920.
- Upgrade xmd to 0.5.
- Upgrade tmux to 2.1.
- Upgrade lighttpd to 1.4.39.
- Upgrade e2fsprogs to 1.42.13.
- Upgrade inadyn-mt to 02.24.49.
- Upgrade zoneinfo to 2016a.
- Upgrade iperf3 to 3.1.2.
- Upgrade netatalk to 3.1.8.
- Upgrade rsync to 3.1.2.
- Upgrade syncthing to 0.12.19.
- Upgrade jQuery to v1.12.1.
- Upgrade msmtp to 1.6.4.
- Upgrade nano to 2.5.3.
- Upgrade php to 5.6.19.
- Upgrade inadyn-mt to 02.28.04.
- Upgrade transmission to 2.92.
- Upgrade samba to 4.2.9.

Fixes:
- Fix typo (ticket #260)
- Fix ZFS volume is not shown in filechooser.
- Fix System status pages shows wrong free space for zfs pools (ticket #271)
- Fix 5000ms page refresh. (took more time than set)
- Fix AFP compatibility don't work if you didn't enable Samaba AD.
- Fix run now on cron don't use Who field.
- Fix duplicate syncthing account when fresh install by 2067.
- Fix broken menu options livecd/liveusb.
- Fix syncthing causes Illegal instruction on old i386. (don't use SSE2)
- Fix VirtualBox cannot be connected via noVNC if using HTTPS.
- Fix bridged member cannot be set IP address.
- Fix minidlna log file location mismatch. (ticket #255)
- Fix smbclient use NT1 instead of SMB3/SMB2. (ticket #236)
- Fix cannot execute samba if time server is empty.
- Fix missing loader parameters on fresh installation. (full only)
- Fix NTFS is not detected on Import disks.
- Fix SSL certificate link. (ticket #239)
- Fix NFS share network. (ticket #238)
- Fix boot time ntpdate fail when AD DC enabled.
- Fix wrong path in Samba AD. (ticket #228, #232)
- Fix rsync does not start/restart on WebGUI.
- Fix send test email when language was changed other than english.
- Fix Undefined symbol "av_find_stream_info" in fuppes/libmetadata_libavformat.so.
- Fix AFP share is not advised.
- Fix webserver user logins.
- Fix wrong path (ticket #228).
Note:
- iperf2 has been replaced for iperf3 because of inconsistent results for UDP above 2Gbps.
- iperf3 is not backwards compatible with iperf2.x.

Permanent restrictions:
- It is not possible to format a SoftRAID disk with MSDOS FAT16/32.
- It is not possible to encrypt a disk partition, only complete disks are supported.
- AFP shares with TimeMachine support are limited to max. 4 shares.

Note for new users:
===================

**** The default login for NAS4Free WEBGUI ****

username: admin
password: nas4free

- Change those defaults after setup!

**** phpVitualBox's default login ****

username: admin
password: admin

- Change those default passwords after setup!

wiki virtualbox
http://wiki.nas4free.org/doku.php?id=do ... virtualbox



Regards,
The NAS4Free Team

[zoon01]

Changes after release 10.2.0.2.2332
===============================
- Upgrade to FreeBSD 10.2-RELEASE-P13.
- Add design changes for WebGUI.
- Add netatalk /bin/dbd.
- Add option casesensitivity for zfs datasets.
- Add gettext for translations.
- Improve send test email function.
- Replaced some deprecated php code lines.
- Fix index.php shows wrong free space for zfs pools (ticket #271)
- Fix cosmetic issue loginscreen if file manager is disabled.
- Fix bold color swap, pools, etc.
- Fix refresh on index.php.
- Update translation files.
- Upgrade php to 5.6.19.
- Upgrade inadyn-mt to 02.28.04.
- Upgrade transmission to 2.92.
- Upgrade samba to 4.2.9.

Enjoy!

Please Do make a new BACKUP of the config after the upgrade!

Regards,
zoon01

[provels]

Woohoo! Me first!

Upgraded and running now.

[JoseMR]

Woohoo! Me first!

Upgraded and running now.

Tell us how you like the new GUI designs, Icons and the like compared with previous releases.

Regards!

[provels]

Looks great; clean and modern. No issues for me, but I run a pretty simple setup of CIFS and MiniDLNA on a ZFS mirror. Wish I could see my CPU temp, but that's my hardware, not N4F. Rock-solid 8.3C! Thanks for a job well done!

[raulfg3]

some examples.

PD: Perhaps time to update web: http://www.nas4free.org whit new screen captures?

1.jpg

[JoseMR]

Looks great; clean and modern.

Great to know you like it.

Perhaps time to update web: http://www.nas4free.org whit new screen captures?

+1
P.S Also need fix on the web page, still becomes dark wen you click on the screenshots with IE and Firefox.

[neptunus]

still got the NT_STATUS_ACCESS_DENIED error.
Info
This is very unfortunate!

[zoon01]

still got the NT_STATUS_ACCESS_DENIED error.
Info
This is very unfortunate!

It seems they only fixed security issues for this release of samba.
Lets 'wait and see it's next version.

[neptunus]

It seems they only fixed security issues for this release of samba.
Lets 'wait and see it's next version.

Indeed

[Cellobita]

I'm having the same issue as neptunus, and it represents a significant regression for my customers - they aren't able to recover previous versions of their files, but have to open a ticket with me for that; the corresponding Bugzilla thread for Samba seems abandoned. Any chance one of you NAS4Free developers can [bump] the Samba team?

[TeoLinuX]

I really like this new version.
I hope some update are now made to the website (I sent a feedback to the site admin using the link in the homepage)

Like @provels I have issues with the temperature readings (always been like that: I see something like +0.2C)
and still have to figure out if I have to use powerd or the bios cool&quite auto settings, I fear they're conflicting

Code: Select all

Version	10.2.0.2 - Prester (revision 2407)
Platform	x64-embedded on AMD A4-4000 APU with Radeon(tm) HD Graphics
System	ASRock FM2A75M-DGS (bios AMI version: P2.50)

I must invest some time on configuring the NFS service and shares (never been able to fire it up and connect my linux notebook)
UPS by APC is recognized wonderfully

so far so good
Thanks devs & admins

[zoon01]

Update website is on todo list, thank you

[hastdotwhat]

Checking the system log after the latest upgrade I noticed that powerd was failing to start on an AMD T40 system. From the command line I got:

# ./powerd start
Starting powerd.
powerd: no cpufreq(4) support -- aborting: No such file or directory
./powerd: WARNING: failed to start powerd

From memory disabling of acpi_throttle was enabled relatively recently in Nas4Free, so disabling this in loader.conf:

Code: Select all

hint.acpi_throttle.0.disabled="1" 

enabled powerd to start since dev.cpu.0.freq_levels is now reported:

dev.cpu.0.freq_levels: 1000/-1 875/-1 750/-1 625/-1 500/-1 375/-1 250/-1 125/-1

and the clock dropped to 125MHz with no load, with the CPU temp dropping by 1 degree as well. I know there's a pile of voodoo around FreeBSD's use of ACPI which... well, I don't want to spend the next several hours scouring the web, but wanted to post this in case anyone else has seen this issue. With the early 10.x kernels the recommendation was to disable acpi_throttle, however with more recent ones it seems that this disables frequency scaling, which means powerd won't start.

[ajm83]

I've got a problem with this build. Samba is asking for authentication, and SSH won't allow me in.

Have this in the system log:

Code: Select all

Mar 10 15:29:22 	fractal 	init: getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs
Mar 10 15:29:22 	fractal 	init: getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs
Mar 10 15:29:22 	fractal 	login: pam_start(): system error
Mar 10 15:29:22 	fractal 	login: pam_start(): system error
Mar 10 15:29:22 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:29:22 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:29:22 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:29:22 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:29:22 	fractal 	login: pam_start(): system error
Mar 10 15:29:22 	fractal 	login: pam_start(): system error
Mar 10 15:29:22 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:29:22 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:29:22 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:29:22 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:29:22 	fractal 	login: pam_start(): system error
Mar 10 15:29:22 	fractal 	login: pam_start(): system error
Mar 10 15:29:22 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:29:22 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:29:22 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:29:22 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:29:22 	fractal 	login: pam_start(): system error
Mar 10 15:29:22 	fractal 	login: pam_start(): system error
Mar 10 15:29:22 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:29:22 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:29:22 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:29:22 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:29:22 	fractal 	login: pam_start(): system error
Mar 10 15:29:22 	fractal 	login: pam_start(): system error
Mar 10 15:29:22 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:29:22 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:29:22 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:29:22 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:28:52 	fractal 	init: getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs
Mar 10 15:28:52 	fractal 	init: getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs
Mar 10 15:28:52 	fractal 	login: pam_start(): system error
Mar 10 15:28:52 	fractal 	login: pam_start(): system error
Mar 10 15:28:52 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:28:52 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:28:52 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:28:52 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:28:52 	fractal 	login: pam_start(): system error
Mar 10 15:28:52 	fractal 	login: pam_start(): system error
Mar 10 15:28:52 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:28:52 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:28:52 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:28:52 	fractal 	login: in try_dlopen(): /usr/local/lib/pam_winbind.so: /usr/local/lib/samba/libreplace-samba4.so: version SAMBA_4.2.9 required by /usr/local/lib/libwbclient.so.0 not found
Mar 10 15:28:52 	fractal 	login: pam_start(): system error
Mar 10 15:28:52 	fractal 	login: pam_start(): system error
Mar 10 15:28:52 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found
Mar 10 15:28:52 	fractal 	login: in openpam_load_module(): no /usr/local/lib/pam_winbind.so found

Edit: This is something to do with my unionFS overlay. I've disabled that and now AD/Samba seems to be working.

Funny thing is that I checked the paths mentioned (e.g. /usr/local/lib/pam_winbind.so) and they are all present and readable.

[slaycock]

Hi

I did a firmware upgrade from 2268 to 2407 (saving configuration first). On reboot I get

Fatal error: Cannot redeclare get_disk_usage() (previously declared in /usr/local/www/index.php:228) in /etc/inc/system.inc on line 824

On checking the console screen no errors or issues are reported and the version is 2407.

[ms49434]

Hi

I did a firmware upgrade from 2268 to 2407 (saving configuration first). On reboot I get

Fatal error: Cannot redeclare get_disk_usage() (previously declared in /usr/local/www/index.php:228) in /etc/inc/system.inc on line 824

On checking the console screen no errors or issues are reported and the version is 2407.

sounds like you're running extended gui which is currently broken. viewtopic.php?f=71&t=6405

[slaycock]

Yes. I'm running extended gui. There wasn't any warning in the post at the top of this thread. Can the extended gui be disabled from the console menu (shell)?

[ms49434]

Yes. I'm running extended gui. There wasn't any warning in the post at the top of this thread. Can the extended gui be disabled from the console menu (shell)?

from the above link: If a system update has been performed already and the index page cannot be displayed due to an error message just replace the page name index.php with extended-gui.php in the browsers address line and hit enter to reach the configuration page and disable Extended Gui.

[raulfg3]

Yes. I'm running extended gui. There wasn't any warning in the post at the top of this thread. Can the extended gui be disabled from the console menu (shell)?

Please read the big warnning on top of the forum:

[slaycock]

I came to the forum because I had a problem. There is nothing in the route where you go through Nas4free.org to get the download or the readme.txt file for 4207 which warns of an issue with the extended gui. Its no good putting warnings in the basement behind the sign 'Beware of the tiger'

[slaycock]

If a system update has been performed already and the index page cannot be displayed due to an error message just replace the page name index.php with extended-gui.php in the browsers address line and hit enter to reach the configuration page and disable Extended Gui.

Many thanks. That worked fine.

[TeoLinuX]

I have a huge problem with miniDLNA sucking up all CPU, RAM and swap.
I posted a detailed report in the miniDLNA subforum: viewtopic.php?f=38&t=10621

I don't know if it a release related problem or it's just me, so I put this heads up here as well.
In case someone needs some log, please let me know
PS: the OS is otherwise excellent, thanxs

[zoon01]

@ ajm83, you have pm

I have a huge problem with miniDLNA sucking up all CPU, RAM and swap.
I posted a detailed report in the miniDLNA subforum: viewtopic.php?f=38&t=10621

I don't know if it a release related problem or it's just me, so I put this heads up here as well.
In case someone needs some log, please let me know
PS: the OS is otherwise excellent, thanxs

I don't think this is related to this release.
I don't know cause yet but i'm to be honest not able to reproduce at all.
Could you try a reinstall and a config restore after?

[TeoLinuX]

I don't think this is related to this release.
I don't know cause yet but i'm to be honest not able to reproduce at all.
Could you try a reinstall and a config restore after?

I'll see what I can do. First I want to analyze all my logs again. Then I'll reinstall.
In case the problem persists, I'll install plex, more complex, but also more feature rich.
Thank you zoon01

Sent from my Nexus 6P using Tapatalk

[Andrey_BAM]

Bittorrent broken. On page Transmission Web Interface quickly change the speed limit is not possible. Not informative.

bitt.png

how to install> 1024?
and sorting is not clear how to perform
Sorry for my english.

[zoon01]

Bittorrent broken. On page Transmission Web Interface quickly change the speed limit is not possible. Not informative.

Could you provide some more info please? Screenshot?

I don't know what you mean, i have it running fine!

[F8BOE]

Hello,

I just upgraded yesterday from 2268 to 2407, embedded (4GB CF card) on my PII 400, 768 MB RAM (+4TB HDD).

NFS works as with 2268 (NFS v4 disabled or enabled)
UPnP (Fuppes) works
DAAP (Firefly) works
RSYNC local works
CIFS/SMB started but not used
DynDNS works
E-mail report works
Web server works
File editor works
QXplorer works
Command line works
UPS works

I didn't see any difference for the WebGUI, the only problem is that the menus don't open up in Konqueror 4.12.5 on Mageia 4 (worked for 2268) but the menus are correctly shown when using Konqueror 4.14.3 on Mageia 5, Firefox do not have this problems...

Keep up the good work!

Ciao @+

[tonyd]

Hi, I'm trying to debug a samba disconnect issue I'm seeing on one of my Windows 10 boxes. It started a few weeks ago (I have upgraded Nas4Free twice I think in that time).

Basically, there's a scheduled job in one of my Windows 10 boxes that copies files from the file server to its local drive for processing. I have been getting "Error : System.IO.IOException: An unexpected network error occurred."

This has been working fine for well over a year until now. I was just wondering if the internal NAF4Free Samba parameters have changed recently. For instance, I see a deadtime value has been set under the "performance" section. That could have been there for years but I wanted to confirm. I also noticed at least one Samba version upgrade, so I'll look into those changes as well.

Thanks for any thoughts on this.

[KimmoJ]

Updated my Full install with no worries from a Live CD.

still got the NT_STATUS_ACCESS_DENIED error.
Info
This is very unfortunate!

Indeed, it's not a showstopper for me since I have yet to implement and tell my users about that possibility, but I wish Samba would get their butts in gear about this issue and get it done. It's quite a big one for anyone doing ZFS + Samba.

Hi, I'm trying to debug a samba disconnect issue I'm seeing on one of my Windows 10 boxes. It started a few weeks ago (I have upgraded Nas4Free twice I think in that time).

I can sympathize with having issues, but this is not the right place to post it. This is about this specific release version of NAS4Free. I'd suggest you post in one of the other forums.