NAS4Free 10.2.0.2.2433 released (FreeBSD 10.2-RELEASE-P14)

[zoon01]

The NAS4Free Team is pleased to announce the release of version 10.2.0.2.2433

http://sourceforge.net/projects/nas4fre ... .0.2.2407/

Everyone can upgrade from NAS4Free version 9.3.0.2.1310 or Higher.

README & CHANGELOG

NAS4Free Upgrade from below 9.3.0.2.1310 is NOT possible!!!
=====================================================
Upgrading NAS4Free "Embedded" or "Full" from any version below 9.3.0.2.1310 by webgui or from
LiveCD/USB is problematic, due a new size of boot partition & partition layout.
Please download and save your NAS4Free config to a safe place and backup all files from second
partition if you use boot disk as data disk.
INSTALL FROM SCRATCH IS THE ONLY WAY!
After installation you can restore your config.
Sorry for inconvenience.
** ! Tools to write extracted embedded file are not supported ! **
You must use the liveusb/CD for it's first installation!!!.

Install from scratch notes
======================
** Embedded.img.xz is only for upgrades by WEBGUI, do not extract and write to any media! **

Download NAS4Free livecd or liveusb and boot from it.
The compressed LiveUSB.img.gz needs to be extracted before you can write it to usb media,
you can use it with Win32DiskImager or any other tool.
Press 9 for the install menu and perform an embedded installation.

Upgrade note:
============
You must associate CARP with physical interface explicitly after upgrading to 10.X. to 10.2.
You may need modifying your NFS and AFP share setting.
You may need modifying your ftp setting, no longer SSL is supported (only TLS).
Send Buffer Size/Receive Buffer Size in CIFS/SMB is changed to 128480 since 9.3.0.2.1375.
/var and /var/tmp size has changed.
After the upgrade please do make a new backup of your config System|Backup/Restore.

ZFS User note!
After upgrading, you must re-sync ZFS configuration from Disks|ZFS|Configuration|Synchronize.

Requirements
============
Embedded: 2GB CF/USB/SSD (NAS4free "Embedded" is Recommended Install)
Full: 4GB HDD/SSD (For developers and some advanced users, Not Recommended!)
Swap less: physical memory 2GB or higher needed.
With swap: physical memory 512MB + swap 512MB (swap 1024MB recommended).

*Note: LiveCD is not supported on swap mode except installation and upgrading.

BUILD 10.2.0.2.2433
=================
Changes:
- Upgrade to FreeBSD 10.2-RELEASE-P14.
- Add Mellanox ConnectX-2 EN driver module. (x64 only)
- Add Auxiliary parameters in Samba AD.
- Add bhyve and related files. (CLI only)
- Add hint.acpi_throttle.0.disabled="0", hint.p4tcc.0.disabled="0".
- Add dlna user and group.
- Add minidlna.
- Add VirtualBox with WebSocket VNC server. (x86 and x64 only)
- Add phpVirtualBox and noVNC(HTML5/WebSocket VNC client) for VM management.
- Add ability to mount exFAT disk.
- Add samba local group.
- Add ability to add tap device on bridge interface.
- Add console fonts and keymaps.
- Add keymap setting/restart WebGUI in console menu.
- Add quirk for Silicon Power 16GB and more.
- Add allow group when local users only mode on FTP service.
- Add RRDtool and related files.
- Add mapping DOS attributes on CIFS/SMB. (OFF by default)
- Add various daemon/utility/debug tools for future development.
- Add hosts allow on console menu.
- Add autoresize on SD image. (ARM only)
- Add sendmail_path to php.ini to use mail() function.
- Add auto start/stop VM. (virtualbox)
- Add syncthing and related user and group.
- Add a part of Xen dom0 edition.
- Add vfs.zfs.arc_max, vfs.zfs.arc_min, vfs.zfs.prefetch_disable.
- Add IPMItool needs ipmi_load enabled in System|Advanced|loader.conf.
- Add volblocksize on ZFS volume creation.
- Add volmode on ZFS volume.
- Add ability AFP compatibility per share.
- Add accept remote syslog message.
- Add disable compress same syslog message.
- Add gpart show on Diagnostics|Information|Partitions.
- Add function to enable SMART Monitoring of SMART capable & enabled devices on import.
- Add date/time format selection.
- Remove usesendfile on CIFS/SMB.
- Remove legacy disk aliases such as /dev/ad0.
- Change some WebGUI menus and update text strings.
- Change DSA private key to RSA private key on SSH service.
- Change ZFS pool info reflected from zpool list.
- Change Store DOS attributes to OFF by default.
- Change var/tmpfs size to 512MB/256MB.
- Change empty bridge is allowd.
- Change iscsi initiator. (iscontrol -> iscsictl)
- Upgrade bash 4.3 to patch 42.
- Upgrade isboot to 0.2.13.
- Upgrade tzdata to 2015g.
- Upgrade mDNSResponder to 576.30.4.
- Upgrade dmidecode to 3.0.
- Upgrade dialog to 1.2-20150920.
- Upgrade xmd to 0.5.
- Upgrade tmux to 2.1.
- Upgrade lighttpd to 1.4.39.
- Upgrade e2fsprogs to 1.42.13.
- Upgrade iperf3 to 3.1.2.
- Upgrade netatalk to 3.1.8.
- Upgrade rsync to 3.1.2.
- Upgrade jQuery to v1.12.1.
- Upgrade msmtp to 1.6.4.
- Upgrade nano to 2.5.3.
- Upgrade php to 5.6.19.
- Upgrade inadyn-mt to 02.28.04.
- Upgrade transmission to 2.92.
- Upgrade samba to 4.2.9.
- Upgrade syncthing to 0.12.20.
- Upgrade bsnmp-ucd to 0.4.2.
- Upgrade nut to 2.7.4.
- Upgrade proftpd to 1.3.5b.
- Upgrade zoneinfo to 2016b.

Fixes:
- Fix typo (ticket #260)
- Fix ZFS volume is not shown in filechooser.
- Fix System status pages shows wrong free space for zfs pools (ticket #271)
- Fix 5000ms page refresh. (took more time than set)
- Fix AFP compatibility don't work if you didn't enable Samaba AD.
- Fix run now on cron don't use Who field.
- Fix duplicate syncthing account when fresh install by 2067.
- Fix broken menu options livecd/liveusb.
- Fix syncthing causes Illegal instruction on old i386. (don't use SSE2)
- Fix VirtualBox cannot be connected via noVNC if using HTTPS.
- Fix bridged member cannot be set IP address.
- Fix minidlna log file location mismatch. (ticket #255)
- Fix smbclient use NT1 instead of SMB3/SMB2. (ticket #236)
- Fix cannot execute samba if time server is empty.
- Fix missing loader parameters on fresh installation. (full only)
- Fix NTFS is not detected on Import disks.
- Fix SSL certificate link. (ticket #239)
- Fix NFS share network. (ticket #238)
- Fix boot time ntpdate fail when AD DC enabled.
- Fix wrong path in Samba AD. (ticket #228, #232)
- Fix rsync does not start/restart on WebGUI.
- Fix send test email when language was changed other than english.
- Fix Undefined symbol "av_find_stream_info" in fuppes/libmetadata_libavformat.so.
- Fix AFP share is not advised.
- Fix webserver user logins.
- Fix wrong path (ticket #228).
- Fix index.php shows wrong time (ticket #279).

Note:
- iperf2 has been replaced for iperf3 because of inconsistent results for UDP above 2Gbps.
- iperf3 is not backwards compatible with iperf2.x.

Permanent restrictions:
- It is not possible to format a SoftRAID disk with MSDOS FAT16/32.
- It is not possible to encrypt a disk partition, only complete disks are supported.
- AFP shares with TimeMachine support are limited to max. 4 shares.

Note for new users:
===================

**** The default login for NAS4Free WEBGUI ****

username: admin
password: nas4free

- Change those defaults after setup!

**** phpVitualBox's default login ****

username: admin
password: admin

- Change those default passwords after setup!

wiki virtualbox
http://wiki.nas4free.org/doku.php?id=do ... virtualbox



Regards,
The NAS4Free Team

[zoon01]

Changes after release 10.2.0.2.2407
===================================
- Upgrade to FreeBSD 10.2-RELEASE-P14.
- Add new s.m.a.r.t. id strings to WebGUI.
- Verify ssl certificate of firmware check update site.
- Fix index.php shows wrong time. (ticket 279)
- Update translations.
- Upgrade syncthing to 0.12.20.
- Upgrade bsnmp-ucd to 0.4.2.
- Upgrade nut to 2.7.4.
- Upgrade proftpd to 1.3.5b.
- Upgrade zoneinfo to 2016b.

Enjoy!

Regards,
zoon01

[apollo567]

Works for me

[Ouroborus]

Still haven't got cifs/samba to work since 2268. I can see my shares but can't access them... Does anyone know a failsafe setup to try? I have tried making new shares with other paths aswell but they don't work either. As son as I install 2268 again all work!

[kkd]

i use win shares. nothing changed, it works like charm.

[Ouroborus]

I seem to have found the solution now. I uninstalled and deleted all commands and files for ezplex v2 and now it works.

[JoseMR]

I seem to have found the solution now. I uninstalled and deleted all commands and files for ezplex v2 and now it works.

Hi, is confirmed UnionFS causes issues on NAS4Free 10.x, you have PM

Regards

[jamaroney]

No problems w/ Samba or Plexmedia server via union_fs mounts (no ezPlex)

[alexey123]

Home and test servers works.

[KimmoJ]

Guessing the Samba / ZFS / Shadow Copy issue is still an issue with this one?

[kkd]

yes, I switched back to smb2 and had to switch off shadow copy.

[erik]

I can use shadow copy in samba (smb3) on zfs but only after I changed the smbd user to root
With the default nobody user I got access error messages in the log

[kkd]

thanks erik, but u got error all the time? or just sometimes randomly?

[KimmoJ]

I can use shadow copy in samba (smb3) on zfs but only after I changed the smbd user to root
With the default nobody user I got access error messages in the log

This somehow doesn't strike me as the most secure solution?

[loozhengyuan]

Tried upgrading and a few problems occurred:

1. My config was erased. Had to restore to old backup.
2. After restoring, webgui appears but got error displaying the homepage.
(Fatal error: Cannot redeclare get_disk_usage() (previously declared in /usr/local/www/index.php:228) in /etc/inc/system.inc on line 824)

[kkd]

please read 1st post
maybe u need re-sync:
"ZFS User note!
After upgrading, you must re-sync ZFS configuration from Disks|ZFS|Configuration|Synchronize."

[loozhengyuan]

I can't even get pass the login screen, so I literally can't do anything through the webGUI.

[kkd]

Try admin/nas4free

[loozhengyuan]

As in, after logging in, restored my old config, I can get pass the login screen. But it is just one white screen with the words shown "Fatal error: Cannot redeclare get_disk_usage() (previously declared in /usr/local/www/index.php:228) in /etc/inc/system.inc on line 824"

[kkd]

U got extended gui?

[loozhengyuan]

yes I do

[kkd]

That is the problem. Till now it is not upgraded to the new n4f.

[ChriZathens]

yes I do

You solution is:

To get the Status page back just replace the page name index.php with extended-gui.php in the browsers address line and hit enter to reach the configuration page and disable Extended Gui.

[crest]

That is the problem. Till now it is not upgraded to the new n4f.

EGUI can be used from r2407 and up, so for 2433 it s fine, see also the first post of the extension thread.

Regards crest

[bgold]

Weird issue going on. Upgraded to 10.2.0.2.2433 a couple days ago and all worked fine. Today I am no longer able to access any of my shares. I have two smb shares and 3 ZFS mapped on a windows 7 machine. Rebooted freenas and still have the issue. I cannot browse the server either. Any ideas?

Thanks

[kkd]

try to reboot your client.

[bgold]

I did already.

[kkd]

try to restore config
check ip
check smb is running
check log

[raulfg3]

check your ZFS pool , perhaps some disk are died.....

[bgold]

Found this.
Starting smbd.
Shared object "libgnutls.so.28" not found, required by "libauthkrb5-samba4.so"
./rc: WARNING: failed to start smbd

Any ideas?