This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
SMB Multipath
-
mbze430
- experienced User
- Posts: 95
- Joined: 20 Nov 2014 05:41
- Status: Offline
SMB Multipath
Without digging in to directly FreeBSD. Anyone know if SMB3 Multipath is supported in FreeBSD and specifically in NAS4Free??
NAS #1 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SL7-F w/ 24GB ECC - LSI SAS 9207-16i - 2x RAIDZ1 (10x3TB) Pools and 1x (2x4TB) Stripe Pool
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)
-
mbze430
- experienced User
- Posts: 95
- Joined: 20 Nov 2014 05:41
- Status: Offline
Re: SMB Multipath
I take it NOBODY knows if MultiPath SMB is supported in FreeBSD/NAS4Free??
NAS #1 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SL7-F w/ 24GB ECC - LSI SAS 9207-16i - 2x RAIDZ1 (10x3TB) Pools and 1x (2x4TB) Stripe Pool
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)
-
mbze430
- experienced User
- Posts: 95
- Joined: 20 Nov 2014 05:41
- Status: Offline
Re: SMB Multipath
So I was reading this https://www.samba.org/samba/history/samba-4.4.0.html
I was wondering when it will trickle down to FreeBSD and to NAS4Free ??? I want to do some testing on SMB Multpath/Multichannel
I was wondering when it will trickle down to FreeBSD and to NAS4Free ??? I want to do some testing on SMB Multpath/Multichannel
NAS #1 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SL7-F w/ 24GB ECC - LSI SAS 9207-16i - 2x RAIDZ1 (10x3TB) Pools and 1x (2x4TB) Stripe Pool
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)