NAS4Free 10.3.0.3.2964 released (FreeBSD 10.3-RELEASE-P7)

[zoon01]

The NAS4Free Team is pleased to announce the release of version 10.3.0.3.2964.

http://sourceforge.net/projects/nas4fre ... .0.3.2964/

Everyone can upgrade from NAS4Free version 9.3.0.2.1310 or Higher.
Please read the README.

BUILD 10.3.0.3.2964
=================
Changes after release 10.3.0.3.2942:
- Update translations.
- Add zfs snapshot rollback feature.
- Add zpool import using gpt labels / gpt id.
- Upgrade inadyn-mt to 02.28.07.
- Upgrade nano to 2.7.0.
- Upgrade e2fsprogs to 1.43.3.
- Upgrade virtualbox-ose to 5.1.6.
- Upgrade netatalk to 3.1.10.
- Upgrade php to 7.0.11.
- Upgrade sudo to 1.8.18.
- Upgrade syncthing to 0.14.7.


Regards,
The NAS4Free Team

[octave]

update since last NAS4Free 10.3.0.3 (2942) on cluster is ok, but juste a litle problem with hast/carp/iscsi, the latence is so longer to switch master node to slave

[lindsay]

The upgrade went smooth, did make a backup of the configs this time.
Did not need them this time.

[F8BOE]

Hello,

All went smooth here on my old PII, it still runs rock solid!

Ciao @+

[pkatruss]

I tried to create a Dataset and noticed that the GUI now limits the name to 20 characters. I had originally created all my Datasets back when I was running 9.2.0.1 (972).

The longest name I had created then was "DataBase/PlexMediaServer". The Dataset works OK with this name even after upgrading to 10.3.0.3 (2870). However, when I try to create a Dataset with this name under 10.3.0.3 (2964), as well as under (2870) the GUI limits me to "DataBase/PlexMediaSe".

According to the FreeBSD Man Pages a Dataset name can be 256 characters. I cannot find any explanation why the 20 character limit. If anyone can enlighten me I would be grateful.

Peter.

[jack47]

How about this?
https://sourceforge.net/p/nas4free/bugs/300/

I haven't time to try.

Best Regards
Jack

[ms49434]

I tried to create a Dataset and noticed that the GUI now limits the name to 20 characters. I had originally created all my Datasets back when I was running 9.2.0.1 (972).

The longest name I had created then was "DataBase/PlexMediaServer". The Dataset works OK with this name even after upgrading to 10.3.0.3 (2870). However, when I try to create a Dataset with this name under 10.3.0.3 (2964), as well as under (2870) the GUI limits me to "DataBase/PlexMediaSe".

According to the FreeBSD Man Pages a Dataset name can be 256 characters. I cannot find any explanation why the 20 character limit. If anyone can enlighten me I would be grateful.

Peter.

The length of a zfs dataset name or a zfs volume name was always limited to 20 characters in the WebGUI.
The next release will allow up to 40 characters.

[pkatruss]

I tried to create a Dataset and noticed that the GUI now limits the name to 20 characters. I had originally created all my Datasets back when I was running 9.2.0.1 (972).

The longest name I had created then was "DataBase/PlexMediaServer". The Dataset works OK with this name even after upgrading to 10.3.0.3 (2870). However, when I try to create a Dataset with this name under 10.3.0.3 (2964), as well as under (2870) the GUI limits me to "DataBase/PlexMediaSe".

According to the FreeBSD Man Pages a Dataset name can be 256 characters. I cannot find any explanation why the 20 character limit. If anyone can enlighten me I would be grateful.

Peter.

The length of a zfs dataset name or a zfs volume name was always limited to 20 characters in the WebGUI.
The next release will allow up to 40 characters.

I still have a system running Nas4Free 9.2.0.1 (972). I was able to create a Dataset name with 63 characters using the web interface. The characters scrolled left when entering more characters than the window size (24 characters). I also was able to scroll left and right using the left and right arrow keys.

For example when I enter "ThisIsAtestDataSetName0123456789" the windows show "ThisIsAtestDataSetName01" before scrolling starts. When I finished typing in all the characters I only see the last 24 characters in the windows "stDataSetName0123456789". As I said I can use the left and right arrow keys to review the full name.

Would it be possible to have this scrolling functionality back?

[provels]

Upgrade went fine on my simple setup. MiniDLNA and CIFS/SMB only.

[alexey123]

I begin to build new hardware and see first simple fault with temperature sensor


Themporary solve problem - add to loader config (Check bios temperature monitor)

Code: Select all

dev.amdtemp.0.sensor_offset=42

[provels]

Mine has same problem, shows 8.3 C, but always has been that way. I thought probably a chipset incompatibility.
The server is a P4, about 13 years old.

Capture.JPG

[NAS4Free4Me]

Hi:

Not seeing that on my current system configuration:

M/B: ASUSTeK COMPUTER INC. H87M-E
CPU: x64-embedded on Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz
F/W: American Megatrends Inc. version: 2103 04/14/2015

What I'd really like to see is the F Temp in parenthesis (IE: CPU Temp: 41 C (105.8 F). I mean how hard could it be to program that in to the System Info screen on the same line for each CPU core? Not trying to be super critical, just my .02 worth.

[darioml]

Hi.

Last night, I updated my N3150-itx server from embedded (usb) 2942, but it didn't go well at first.

On the screen, I could see that the firmware had (supposedly) been updated, but it said that the system had halted and asked me to turn the system off and on. Well, I thought that it was going to reboot itself automatically... Strange. So, I got scared...

After turning it on, a FreeBSD prompt appeared and said that no boot loader was found... no kernel... Nothing...

I had to download the Live-CD iso of N4F, install it on the pendrive by using VM (after some problems to make it GPT since the N4F installer could not make it automatically), connect the pendrive, boot the server up and restore the settings through the GUI.

After more than 2 hours (yes, next time it happens, I intend to make it much shorter), I had finally my server up and running with this new 2964 release.

Still, I don't know what went wrong during the process of updating the pendrive during the normal process from the GUI...

Cheers!

[HenriM]

Did you had 'Extended GUI' enabled when upgrading? My experience is to disable it always before upgrading your firmware, otherwise you can run into these kind of issues.

[darioml]

It was enabled... Last time, I lost the configuration, but I can live with it. But... losing completely the capacity of booting... it's too much trouble.

[ChriZathens]

I doubt egui would cause such an issue.
Most probably your pen drive got crapped somehow.

[darioml]

I doubt egui would cause such an issue.
Most probably your pen drive got crapped somehow.

Well, I hope that it isn't... I got a SanDisk SDCZ80-016G-FFP for it. It's said it is the best in speed (specially in small files) and durability. I hope it doesn't break down in only 9 months

[HenriM]

I had this issue 3 times with previous updates when Extended GUI was turned on. Firmware update with GUI went OK, but after reboot there was not bootable disk and I had to use the LIVE CD to recover from it. After that time I always disable Extended GUI first before I updating my firmware with the GUI. Since that time no issues anymore. Coincidence? Perhaps, but for me it now always went fine when disabling Extended GUI first.

[ChriZathens]

In this case, then, it is no coinsidence...
I think you should bring this to crest's attention, if you haven't done it already.

[octave]

Hi all

i replaced all realteck nic 8111/8169/8168/8411 by intel pro nic 1gb because they was instable with carp and or lagg solution.
all realteck nic are new, and i see this problem on linux distribution too.

so i don't think that realy the fact of nas4free or any bsd solution.

thx for build job

[danzi]

Guys, have this badboy up since about a week, but phpVirtualBox errors out with

The virtual machine 'win7' has terminated unexpectedly during startup with exit code 1 (0x1)

No matter what OS I try to run. Also remote display VNC tab is greyed out. Is there any tricks to get vm up and running?