This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

HELP!! Replacing drives in ZPOOL

Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
cruzmiester
NewUser
NewUser
Posts: 13
Joined: 07 Nov 2012 16:21
Status: Offline

HELP!! Replacing drives in ZPOOL

Post by cruzmiester »

I would really appreciate help and pointing to a guide that can help me fix my zfs pool state.
2 drives in my zfs pool failed and I replaced them. The concern I'm having mfid2 Nas4Free is showing as removed, is being used again. And mfide6 is no longer displaying in the pool's device list.

I've included 3 graphics attachments that show 1. list of my disks, 2. devices in the ZFS tools 3. the ZFS Pool Information.

Thanks for the help!
Carlos
You do not have the required permissions to view the files attached to this post.
Top
sleid
PowerUser
PowerUser
Posts: 774
Joined: 23 Jun 2012 07:36
Location: FRANCE LIMOUSIN CORREZE
Status: Offline

Re: HELP!! Replacing drives in ZPOOL

Post by sleid »

go to advanced command and execute:

zpool replace vBrickPool01 2591482290226891417 /dev/mfid6

zpool replace vBrickPool01 10998701244411612627 /dev/mfid2
12.1.0.4 - Ingva (revision 7852)
FreeBSD 12.1-RELEASE-p12 #0 r368465M: Tue Dec 8 23:25:11 CET 2020
X64-embedded sur Intel(R) Atom(TM) CPU C2750 @ 2.40GHz Boot UEFI
ASRock C2750D4I 2 X 8GB DDR3 ECC
Pool of 2 vdev Raidz1: 3 WDC WD40EFRX + 3 WDC WD40EFRX
Top
cruzmiester
NewUser
NewUser
Posts: 13
Joined: 07 Nov 2012 16:21
Status: Offline

Re: HELP!! Replacing drives in ZPOOL

Post by cruzmiester »

thanks for the help!!!
I couldn't use /dev/mfid2 but I understood the logic and the pool is back to full health.

thanks!
Carlos
Top
Post Reply

Return to “ZFS (only!)”