Hello
I tried to upgrade my nas4free with live cd. But the menu tells me "no full version detected" when I select "upgrade & change from full OS to embedded" and "no embedded version detected" when I select "upgrade embedded OS".
How can that be that there is neither a full nor an embedded version when the system is clearly bootable and running from harddisk?
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
No embedded AND no full installation detected?
-
piwwo
- Starter
- Posts: 27
- Joined: 21 Mar 2013 15:30
- Status: Offline
-
piwwo
- Starter
- Posts: 27
- Joined: 21 Mar 2013 15:30
- Status: Offline
Re: No embedded AND no full installation detected?
btw it's a HP Proliant Microserver and the system was on USB however I installed it as full so I just wanted to upgrade from full to embedded but the installer seems to fail detecting the USB disk. I installed the system now again in legacy MBT mode without swap since all the other options didn't work either.
-
crowi
- Forum Moderator
- Posts: 1176
- Joined: 21 Feb 2013 16:18
- Location: Munich, Germany
- Status: Offline
Re: No embedded AND no full installation detected?
which version are you currently running?
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
-
erico.bettoni
- experienced User
- Posts: 140
- Joined: 25 Jun 2012 22:36
- Location: São Paulo - Brasil
- Status: Offline
Re: No embedded AND no full installation detected?
Export the config from the live system, reinstall from scratch and restore.
There have been some issues with booting and upgrade lately. By doing this you will avoid problems now and latter.
There have been some issues with booting and upgrade lately. By doing this you will avoid problems now and latter.
-
piwwo
- Starter
- Posts: 27
- Joined: 21 Mar 2013 15:30
- Status: Offline
Re: No embedded AND no full installation detected?
Sorry for the late reply
Here my uname
# uname -a
FreeBSD nas-office 10.3-RELEASE-p7 FreeBSD 10.3-RELEASE-p7 #0 r304958M: Sun Aug 28 20:17:06 CEST 2016 root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64
The old system was installed in 2014 I don't remember the actual version but it was very old. It even still had the weak ssh-dss crypto by default.
I was just curious because on another similar system (HP Microserver), that was as old, the update worked. However there I was using a SATA disk for the operating system and not an USB-stick.
Here my uname
# uname -a
FreeBSD nas-office 10.3-RELEASE-p7 FreeBSD 10.3-RELEASE-p7 #0 r304958M: Sun Aug 28 20:17:06 CEST 2016 root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64
The old system was installed in 2014 I don't remember the actual version but it was very old. It even still had the weak ssh-dss crypto by default.
Yes that's what I did eventually.erico.bettoni wrote:Export the config from the live system, reinstall from scratch and restore.
There have been some issues with booting and upgrade lately. By doing this you will avoid problems now and latter.
I was just curious because on another similar system (HP Microserver), that was as old, the update worked. However there I was using a SATA disk for the operating system and not an USB-stick.