Please add the option to disble samba log level, actual minimun value is 1, and recomended is = 0.
https://www.samba.org/samba/docs/man/ma ... l#LOGLEVEL
actual selectable values go from 1 to 4:
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Loglevel on samba = 0
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Loglevel on samba = 0
You do not have the required permissions to view the files attached to this post.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
sea1150
- experienced User
- Posts: 105
- Joined: 23 Jun 2012 07:01
- Location: South Urals
- Contact:
- Status: Offline
Re: Loglevel on samba = 0
good idea, really, why not?
XigmaNAS 11.4.0.4 x64-embedded on - ASUS P8H61-I LX R2.0-GLAN, i5-3570 CPU @ 3.40GHz, 16GB Memory Kit, PCIEx2 Marvell 88SE9230 AHCI 4xSATA controller, HDD: 2x2Tb-UFS, 4x1Tb-RaidZ & 1xSSD L2ARC.
XigmaNAS 11.4.0.4 x64-embedded in - VM on ESXi 6.7U3, 16GB ECC RAM, LSI SAS2008 IT passtrough mode on HP Proliant DL180G6 2xL5640, 112GB RAM, HDD: 12Bay
- and more... My work and all versions
XigmaNAS 11.4.0.4 x64-embedded in - VM on ESXi 6.7U3, 16GB ECC RAM, LSI SAS2008 IT passtrough mode on HP Proliant DL180G6 2xL5640, 112GB RAM, HDD: 12Bay
- and more... My work and all versions