Guys,
Anyone has the same experience - when I use the "run now" option on a rsync config screen - the whole WebGui freezes. I guess this is because it spawns the rsync process and waits for it to complete. Isn't this a bug ? In my opinion - the WebGui can either disown the process or put it in background (using &) in order to avoid freezing.
Because of this issue - I do not use the WebGui for this task, but I run it from the terminal prompt.
Thank you in advance for your comments and suggestions.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Manual starting of local rsync hangs the WebGui
-
fallen2109
- Starter
- Posts: 51
- Joined: 27 Oct 2014 22:38
- Location: The Netherlands
- Status: Offline
Manual starting of local rsync hangs the WebGui
12.0.0.4 - Reticulus (revision 6928)
x64-full on Intel(R) Xeon(R) CPU L5640 @ 2.27GHz (Dual CPU)
Supermicro X8DT3, 48 GB Ram
x64-full on Intel(R) Xeon(R) CPU L5640 @ 2.27GHz (Dual CPU)
Supermicro X8DT3, 48 GB Ram
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Manual starting of local rsync hangs the WebGui
sorry I do not use RSYNC, but I remember some old post that comment the same: Once RSYNC is run from webGUI, this freeze the webGUI until RSYNC command ended.
I do not know if is a feature or if is possible to solve.
I do not know if is a feature or if is possible to solve.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
fallen2109
- Starter
- Posts: 51
- Joined: 27 Oct 2014 22:38
- Location: The Netherlands
- Status: Offline
Re: Manual starting of local rsync hangs the WebGui
Is there a manual describing how the WebGUI is built? I am a computer engineer, but Ido not have much understanding in Web pages, but I can give it a try.
12.0.0.4 - Reticulus (revision 6928)
x64-full on Intel(R) Xeon(R) CPU L5640 @ 2.27GHz (Dual CPU)
Supermicro X8DT3, 48 GB Ram
x64-full on Intel(R) Xeon(R) CPU L5640 @ 2.27GHz (Dual CPU)
Supermicro X8DT3, 48 GB Ram
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Manual starting of local rsync hangs the WebGui
Developers correct the issue on 3367: https://sourceforge.net/p/nas4free/code/commit_browser
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
sleid
- PowerUser
- Posts: 774
- Joined: 23 Jun 2012 07:36
- Location: FRANCE LIMOUSIN CORREZE
- Status: Offline
Re: Manual starting of local rsync hangs the WebGui
Solved in r3367, wait for the next release.
12.1.0.4 - Ingva (revision 7852)
FreeBSD 12.1-RELEASE-p12 #0 r368465M: Tue Dec 8 23:25:11 CET 2020
X64-embedded sur Intel(R) Atom(TM) CPU C2750 @ 2.40GHz Boot UEFI
ASRock C2750D4I 2 X 8GB DDR3 ECC
Pool of 2 vdev Raidz1: 3 WDC WD40EFRX + 3 WDC WD40EFRX
FreeBSD 12.1-RELEASE-p12 #0 r368465M: Tue Dec 8 23:25:11 CET 2020
X64-embedded sur Intel(R) Atom(TM) CPU C2750 @ 2.40GHz Boot UEFI
ASRock C2750D4I 2 X 8GB DDR3 ECC
Pool of 2 vdev Raidz1: 3 WDC WD40EFRX + 3 WDC WD40EFRX