I thought I might post this fault I get from time to time. Generally happens if I make a configuration change of any sort then craps out when I reboot or halt.
It's a fresh embedded install on a all new HP Microserver N54L running 11.0.0.4.3330, which didn't display this sort of problem on previous versions.
I know the ram is good. When it does halt properly it takes some time getting through the mps0 sections of the halt when previously it just whizzed by normally. I wonder if it's the Avago Technologies (LSI) SAS2008 driver as I recall someone else questioning this in another post.
Anyone else ever get a panic like this?
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
panic: page fault
-
InTheZone
- NewUser
- Posts: 5
- Joined: 01 Jan 2016 01:53
- Location: Melbourne AU
- Status: Offline
panic: page fault
You do not have the required permissions to view the files attached to this post.
HP Microserver N54L Modded Bios 041 * LSISAS2008 P20 IT mode - Dual Port GbE Broadcom NetXtreme LAGG
ICY BOX Back Plane for 4x 2.5" SSD's ZIL L2ARC - Installed NAS4FREE on first SSD of expander for reliability. No USB
Embedded 10.3.0.3.3379 - Configured as Samba AD DC with Roaming Profiles including mapped home directories.
Happily sitting on an Eaton 5110 UPS - Not upgrading firmware anytime soon as 11 was unstable with SAS driver.
ICY BOX Back Plane for 4x 2.5" SSD's ZIL L2ARC - Installed NAS4FREE on first SSD of expander for reliability. No USB
Embedded 10.3.0.3.3379 - Configured as Samba AD DC with Roaming Profiles including mapped home directories.
Happily sitting on an Eaton 5110 UPS - Not upgrading firmware anytime soon as 11 was unstable with SAS driver.
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: panic: page fault
yes, probably some type of version problem in avago driver.
HenriM have try to locate but not totally sure: http://forums.nas4free.org/viewtopic.php?p=74135#p74135
HenriM have try to locate but not totally sure: http://forums.nas4free.org/viewtopic.php?p=74135#p74135
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
InTheZone
- NewUser
- Posts: 5
- Joined: 01 Jan 2016 01:53
- Location: Melbourne AU
- Status: Offline
Re: panic: page fault
Rolled back to 10.3.0.3 (3379) and everything is stable again. Updated my sig to reflect this as well.
HP Microserver N54L Modded Bios 041 * LSISAS2008 P20 IT mode - Dual Port GbE Broadcom NetXtreme LAGG
ICY BOX Back Plane for 4x 2.5" SSD's ZIL L2ARC - Installed NAS4FREE on first SSD of expander for reliability. No USB
Embedded 10.3.0.3.3379 - Configured as Samba AD DC with Roaming Profiles including mapped home directories.
Happily sitting on an Eaton 5110 UPS - Not upgrading firmware anytime soon as 11 was unstable with SAS driver.
ICY BOX Back Plane for 4x 2.5" SSD's ZIL L2ARC - Installed NAS4FREE on first SSD of expander for reliability. No USB
Embedded 10.3.0.3.3379 - Configured as Samba AD DC with Roaming Profiles including mapped home directories.
Happily sitting on an Eaton 5110 UPS - Not upgrading firmware anytime soon as 11 was unstable with SAS driver.