J'ai des disques SAS et je m'étonne du résultat de la commande suivante:
Code: Select all
smartctl -a /dev/da1
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-RELEASE-p14 amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: FUJITSU
Product: MBA3073RC
Revision: D305
User Capacity: 73,407,820,800 bytes [73.4 GB]
Logical block size: 512 bytes
Rotation Rate: 15000 rpm
Logical Unit id: 0x500000e018b6c480
Serial number: BJL3P7B011DB
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Sat Feb 11 17:52:05 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 36 C
Drive Trip Temperature: 65 C
Manufactured in week 48 of year 2007
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 87
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 2243 2243 2243 5266 104806.415 0
write: 0 30 30 30 55 20386.676 0
verify: 0 755 755 755 1774 13653.872 0
Non-medium error count: 100
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Aborted (by user command) - 30953 - [- - -]
# 2 Background long Completed - 0 - [- - -]
# 3 Background short Completed - 0 - [- - -]
Long (extended) Self Test duration: 742 seconds [12.4 minutes]
Est ce normal pour smart car c'est du SAS ?
Si non, comment activer les informations SMART ?
J'ai le même constat sur les 5 autres HDD sas.
Ils sont tous reliés à une carte raid.
Cependant le 6eme disque dur est un SSD relié aussi à cette carte et je retrouve bien les données classiques:
Code: Select all
# smartctl -a /dev/da0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-RELEASE-p14 amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LDLC
Serial Number: 03192016B1133
LU WWN Device Id: 0 000000 000000000
Firmware Version: 20150818
User Capacity: 60,022,480,896 bytes [60.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Feb 11 17:57:29 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 100 100 050 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0002 100 100 050 Old_age Always - 0
9 Power_On_Hours 0x0000 100 100 050 Old_age Offline - 16
12 Power_Cycle_Count 0x0000 100 100 050 Old_age Offline - 35
160 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 0
161 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 119
162 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 1
163 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 36
164 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 812
165 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 1
166 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 0
167 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 0
192 Power-Off_Retract_Count 0x0000 100 100 050 Old_age Offline - 8
194 Temperature_Celsius 0x0000 100 100 050 Old_age Offline - 40
195 Hardware_ECC_Recovered 0x0000 100 100 050 Old_age Offline - 439
196 Reallocated_Event_Count 0x0000 100 100 050 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
241 Total_LBAs_Written 0x0000 100 100 050 Old_age Offline - 76
242 Total_LBAs_Read 0x0000 100 100 050 Old_age Offline - 330
245 Unknown_Attribute 0x0000 100 100 050 Old_age Offline - 836
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported