NAS4Free 11.0.0.4.4009 released (FreeBSD 11.0-RELEASE-P8)

[zoon01]

The NAS4Free Team is pleased to announce a maintenance release of version 11.0.0.4.4009 - Sayyadina

download build 11.0.0.4.4009
Read the readme_11.0

Because of PHP upgrade and its related code changes: extensions like Extended GUI are not compatible!
Extensions should be disabled before and after upgrades until their creators have updated it's sources.
As we do not create/test those plugins against compatibility, we do not know if more OBI installer plugins are broken!
We are sorry.


Major Change!
Note for 32-bits users:
===================
We believe that the use of 32-bits versions can not give the end users it's full potential of the OS, for this
further development on the (i386) 32-bits architecture has been stopped upon the 11.0.0.3.xxxx series.
Current 32-bits users are able to use 32-bits 10.3.0.3.xxxx series until their end of life or do reinstall
to use 64-bits NAS4Free and restore config.

Again TIP: Do not upgrade from 10 series directly!
reinstall and restore config is the way to go because of increased partition size!
You avoid lots of problems later on.

Upgrade note:
=============
RRDGraphs extension can no longer be used with 11.x series, disable and deinstall before upgrade!
RRDGraphs are now included in 11.x series, you can setup on webgui System > Advanced > Monitoring Setup.
Do not reinstall the extension!!!

BUILD 11.0.0.4.4009

Changes after release 11.0.0.4.3958
===================================
- Update translations.
- Upgrade tzdata to 2017a.
- Upgrade iperf to 3.1.7.
- Upgrade syncthing to 0.14.24.
- Add disk capacity formatting.
- Add in page refresh for FTP diagnostics.
- Add HDD Management new framework.
- Add option to shrink header in a session.
- Add option to stop scanning for extension menus.
- Performance improvement by caching header menu.
- Full rewrite of header menu and extension menu scanner.
- Update web links.

Bug Fixes
========
- Fix illegal string offsets.
- Fix spinner spins after weblink usage.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
this will be fixed at a later release, use Chrome or other browser or connect with putty client.

Enjoy!

Regards,
The NAS4Free Team

[GDixon]

Used embedded and it is running very well. Installed, rebooted and came up using the old config.
No problems as of yet!

Greg

[Victek]

Thank you very much for the new version, smooth upd and running!.

[nef]

Hi!
New extension scanner is not working that great. I was upgrading from 3940, I had the Brig installed, and now "Extensions" are not visible at menu bar anymore. However, the jails are still running .

[wtgraham1]

Hello,
Just upgrade and everytime I load add drive and change the ip from the default and same my new setting. It alwas goes back to the factory default

[raulfg3]

Hello,
Just upgrade and everytime I load add drive and change the ip from the default and same my new setting. It alwas goes back to the factory default

probably you use live version and not a embeded or full, post your N4F info like this:

1.jpg

PD: Perhaps your liveCD/USB is still in use?

[crest]

Hello nef,

Hi!
New extension scanner is not working that great. I was upgrading from 3940, I had the Brig installed, and now "Extensions" are not visible at menu bar anymore. However, the jails are still running .

As a workaround call

Code: Select all

http://YourNASIP/extensions_thebrig.php

in your web browser to get the extensions landing page, but keep in mind that TheBrig is not yet PHP 7.1 aware, so expect (maybe) faults in regard of this! See also here => viewtopic.php?p=76190#p76190

Best regards
crest

[wtgraham1]

thanks for reply and yes I used the liveUSB version. I will use the embedded version

[nef]

Hi crest,
Nice workaround, thanks for info! .

[raulfg3]

Extension visible now on 4029: https://www.nas4free.org/forums/viewtop ... 258#p76258

[pumo]

Strange, i did install yesterday 11.0.0.4.4009. first time version 11 after 10. I only have extended gui and I did upgrade it to newest before installing nas4free 11.
So I have extensions in menu bar. Is there any other reason to upgrade now?

[raulfg3]

Strange, i did install yesterday 11.0.0.4.4009. first time version 11 after 10. I only have extended gui and I did upgrade it to newest before installing nas4free 11.
So I have extensions in menu bar. Is there any other reason to upgrade now?

NO necesary, problem only afect to new installs eg: if you want to install a new extrension like "thebrig".

My recomendation is that update to latest 4029 as it fixes more menu bugs and made a speed improvement.