NAS4Free 11.0.0.4.4141 released (FreeBSD 11.0-RELEASE-P8)

[zoon01]

The NAS4Free Team is pleased to announce the release of version 11.0.0.4.4141 - Sayyadina, this version replaces rev4124 !!!

Download build 11.0.0.4.4141
Read the readme_11.0

Major Change!

cifs/smb note:
==============
From Samba 4.5.0 and up the default value for the "ntlm auth" option is changed from "yes" to "no".
This may have impact on very old clients which doesn't support NTLMv2 yet.
Only if you really need NTLMv1 Authentication you can set in Additional Parameters: "ntlm auth = yes".

BUILD 11.0.0.4.4141

Changes after release 11.0.0.4.4067
===================================
- Update translations.
- Encrypt user passwords in config.
- Add Home icon to menu.
- Add new framework backup/restore.
- Add new framework service afp.
- Upgrade syncthing to 0.14.25.
- Upgrade tzdata to 2017b.
- Upgrade jQuery to 3.2.0.
- Upgrade samba to 4.6.1.
- Fix drop down menu on touchscreen with Firefox.
- Fix issues forcing vfs.zfs.min_auto_ashift to be 12 for new pools.
- Fix afp shares, now no longer get deleted.

Note:
Clear your browser's cache to avoid display issues after upgrade.
Make a new backup of your system configuration and store this on safe location.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
this will be fixed at a later release, use Chrome or other browser or connect with putty client.

Enjoy!

Regards,
The NAS4Free Team

[zoon01]

Because of some issues 4124 release now replaced for 4141 release.

[jt01]

Because of some issues 4124 release now replaced for 4141 release.

Does this mean 4124 has been replaced with 4141? Or does this indicate a problem with 4141?

Thanks in advance for the clarification.

[zoon01]

upgrade to 4141 please, 4124 has a few bugs that are now fixed in 4141.

[Pachuco]

The upgraded was without a hint of a problem - at least until immediately afterwards (though I'm not yet certain what happened).

In an attempt to find out why I, after the update, cannot access my pool from Windows/Android, I realises that I didn't have NTP Time Server enabled (and an 8 min difference in system times could explain my problem). Enabling it in n4f gives an 'Error Code 1', informing it couldn't be done (I then manually updated the n4f system time). Does anyone else have this issue?

I can log in as root (e.g. PuTTY, GUI, WinSCP), and I'm presently investigating further why I cannot access pool from any of three PCs and an Android phone. The latter allows me to see the pool folders, but selecting one prompts me for a 'LAN password' so I suppose it has the same issue as the PCs (where using 'net use \\server\folder /user:server\user_name gives error code 86).

I'd be grateful for any ideas!

[zoon01]

The upgraded was without a hint of a problem - at least until immediately afterwards (though I'm not yet certain what happened).

In an attempt to find out why I, after the update, cannot access my pool from Windows/Android, I realises that I didn't have NTP Time Server enabled (and an 8 min difference in system times could explain my problem). Enabling it in n4f gives an 'Error Code 1', informing it couldn't be done (I then manually updated the n4f system time). Does anyone else have this issue?

I can log in as root (e.g. PuTTY, GUI, WinSCP), and I'm presently investigating further why I cannot access pool from any of three PCs and an Android phone. The latter allows me to see the pool folders, but selecting one prompts me for a 'LAN password' so I suppose it has the same issue as the PCs (where using 'net use \\server\folder /user:server\user_name gives error code 86).

I'd be grateful for any ideas!

Try NTLMv1 Authentication in cifs/smb: you can set in Additional Parameters: "ntlm auth = yes".

[Pachuco]

@zoon01

That did it

Much appreciated together with all the efforts of keeping n4f updated and relevant!

[slaycock]

Following my replacement of USB and CF boot devices with some £20 32GB SSD I can report that all three of my Nas4free machines (1xGPT and 2xMBR) all upgraded from 4067 to 4141 without incident.

[alexey123]

High developers!
Can you modify /etc/rc.d/lighttpd for automatic allow ipv6 access to webgui ?

Differences

Code: Select all

--- lighttpd.orig	2017-03-26 20:15:26.000000000 +0300
+++ lighttpd	2017-04-01 10:22:38.000000000 +0300
@@ -84,6 +84,7 @@
 		fi
 	fi
 	_ipv6addr=""
+	_ipv6network=""
 	if configxml_isset "//interfaces/*[enable]/ipv6_enable"; then
 		_ipv6addr=`configxml_get "//interfaces/lan/ipv6addr"`
 		_ipv6subnet=`configxml_get "//interfaces/lan/ipv6subnet"`
@@ -108,7 +109,7 @@
 	_hostsallow=`configxml_get "//system/webgui/hostsallow"`
 	_hostsallow_disable=0
 	if [ -z "$_hostsallow" ]; then
-		_hostsallow="$_network"
+		_hostsallow="$_network $_ipv6network"	
 	fi
 	_hostsallow="${_hostsallow} 127.0.0.1"
 	if configxml_isset "//system/webgui/hostsallow_disable"; then

I attach file and patch

[ms49434]

High developers!
Can you modify /etc/rc.d/lighttpd for automatic allow ipv6 access to webgui ?
...

Code: Select all

# This patch file was generated by NetBeans IDE
# It uses platform neutral UTF-8 encoding and \n newlines.
--- a/<html>lighttpd (<b>4145</b>)</html>
+++ b/<html><b>Current File</b></html>
@@ -85,6 +85,8 @@
 		fi
 	fi
 	_ipv6addr=""
+	_ipv6subnet=""
+	_ipv6network=""
 	if configxml_isset "//interfaces/*[enable]/ipv6_enable"; then
 		_ipv6addr=`configxml_get "//interfaces/lan/ipv6addr"`
 		_ipv6subnet=`configxml_get "//interfaces/lan/ipv6subnet"`
@@ -113,10 +115,41 @@
 	# hosts allow
 	_hostsallow=`configxml_get "//system/webgui/hostsallow"`
 	_hostsallow_disable=0
-	if [ -z "$_hostsallow" ]; then
-		_hostsallow="$_network"
+	# fallback if hostsallow is empty
+	if [ -z "${_hostsallow}" ]; then
+		# add IPv4 network
+		if [ -n "${_network}" ]; then
+#			if [ -z "${_hostallow}" ]; then
+				_hostsallow="${_network}"
+#			else
+#				_hostsallow="${_hostsallow} ${_network}"
+#			fi
 	fi
+		# add IPv6 network
+		if [ -n "${_ipv6network}" ]; then
+			if [ -z "${_hostallow}" ]; then
+				_hostsallow="${_ipv6network}"
+			else
+				_hostsallow="${_hostsallow} ${_ipv6network}"
+			fi
+		fi
+	fi
+	# add IPv4 localhost
+	if [ -n "${_network}" ]; then
+		if [ -z "${_hostsallow}" ]; then
+			_hostsallow="127.0.0.1"
+		else
 	_hostsallow="${_hostsallow} 127.0.0.1"
+		fi
+	fi
+	# add IPv6 localhost
+	if [ -n "${_ipv6network}" ]; then
+		if [ -z "${_hostsallow}" ]; then
+			_hostsallow="::1"
+		else
+			_hostsallow="${_hostsallow} ::1"
+		fi
+	fi
 	if configxml_isset "//system/webgui/hostsallow_disable"; then
 		_hostsallow_disable=1
 	fi

could you please verify and confirm above changes please.

[alexey123]

I check - 403 error on ip4 and ipv6


Also I inspect my patch and I find error - result of routine get_network inet6 re1 is ipv6 network fe80::9e5c:8eff:fe82:99b8%re1/64. Red marked no need part

I attach working code and /var/etc/lighttpd.conf