NAS4Free 11.0.0.4.4195 released (FreeBSD 11.0-RELEASE-P9)

[zoon01]

The NAS4Free Team is pleased to announce the release of version 11.0.0.4.4195 - Sayyadina

Download build 11.0.0.4.4195
Read the readme_11.0

Major Change!

cifs/smb note:
==============
From Samba 4.5.0 and up the default value for the "ntlm auth" option is changed from "yes" to "no".
This may have impact on very old clients which doesn't support NTLMv2 yet.
Only if you really need NTLMv1 Authentication you can set in Additional Parameters: "ntlm auth = yes".

BUILD 11.0.0.4.4195

Changes after release 11.0.0.4.4141
===================================
- Upgrade FreeBSD 11.0-RELEASE to P9.
- Update translations.
- Full Root-On-ZFS now supports upgrades over webgui.
- Remove idle from cpu graph for autoscale operation cpu graph.
- IPv6 accept router advertising.
- Code improvements.
- Upgrade samba to 4.6.2.
- Upgrade mDNSResponder to 765.50.9.
- Upgrade syncthing to 0.14.26.
- Upgrade jQuery to 3.2.1.
- Upgrade nano to 2.8.1.
- Upgrade php to 7.1.4.
- Upgrade proftpd to 1.3.5e.
- Fix system BIOS vendor illegal characters.

Note:
Clear your browser's cache to avoid display issues after upgrade.
Make a new backup of your system configuration and store this on safe location.

Known bugs:
===========
- IE11 and Edge browser does not operate correctly with novnc. Enter & Escape button problematic,
this will be fixed at a later release, use Chrome or other browser or connect with putty client.

Enjoy!

Regards,
The NAS4Free Team

[raulfg3]

hello, I upgrade 4141 Full ZFSRoot to latest 4195 and understand that a new menu to update next releases from webGUI were added, but still do not appear.

Is normal?
only is show from new install?.

I do the update from liveUSB and updating ZFSRoot properly.

1.jpg

Changes after release 11.0.0.4.4141:

Full Root-On-ZFS now supports upgrades over webgui.

[JoseMR]

hello, I upgrade 4141 Full ZFSRoot to latest 4195 and understand that a new menu to update next releases from webGUI were added, but still do not appear.

Is normal?
only is show from new install?.

Full Root-On-ZFS now supports upgrades over webgui.

Hi raul, provably the old web bits are still cached, you have to logoff/clear browser cache then login back.

Regards

[raulfg3]

ok, you are right is a cache problem ( I'm sure that push "Ctrl-F5" on Firefox to flush cache first time), but this time works as expected.

Thanks a lot:

4.jpg

[JoseMR]

ok, you are right is a cache problem ( I'm sure that push "Ctrl-F5" on Firefox to flush cache first time), but this time works as expected.

Thanks raul for confirming, I also have the same cache issue here(either Embedded or Full), were I am completely unable to fully clear FireFox cache other than logoff/login back, or simply close/re-open the the browser.

Regards

[Onichan]

Since upgrading Samba is crashing quite often.

Code: Select all

Apr 21 23:58:21	nas	smbd[88454]: refusing to dump core
Apr 21 23:58:21	nas	smbd[88454]: unable to change to %N.core
Apr 21 23:58:21	nas	smbd[88454]: [2017/04/21 23:58:21.164865, 0] ../source3/lib/dumpcore.c:310(dump_core)
Apr 21 23:58:21	nas	smbd[88454]: #6 0x801cc9b55 <pthread_create+0x925> at /lib/libthr.so.3
Apr 21 23:58:21	nas	smbd[88454]: #5 0x806b1d6f5 <pthreadpool_add_job+0x315> at /usr/local/lib/samba/libmessages-dgm-samba4.so
Apr 21 23:58:21	nas	smbd[88454]: #4 0x806b1e087 <pthreadpool_tevent_job_send+0x207> at /usr/local/lib/samba/libmessages-dgm-samba4.so
Apr 21 23:58:21	nas	smbd[88454]: #3 0x805502171 <_talloc_get_type_abort+0x161> at /usr/local/lib/libtalloc.so.2
Apr 21 23:58:21	nas	smbd[88454]: #2 0x802109a1d <smb_panic+0x13d> at /usr/local/lib/libsamba-util.so.0
Apr 21 23:58:21	nas	smbd[88454]: #1 0x8042552c2 <smb_panic_s3+0x52> at /usr/local/lib/libsmbconf.so.0
Apr 21 23:58:21	nas	smbd[88454]: #0 0x8042553d8 <log_stack_trace+0x28> at /usr/local/lib/libsmbconf.so.0
Apr 21 23:58:21	nas	smbd[88454]: BACKTRACE: 7 stack frames:
Apr 21 23:58:21	nas	smbd[88454]: [2017/04/21 23:58:21.164792, 0] ../source3/lib/util.c:902(log_stack_trace)
Apr 21 23:58:21	nas	smbd[88454]: PANIC (pid 88454): Bad talloc magic value - wrong talloc version used/mixed
Apr 21 23:58:21	nas	smbd[88454]: [2017/04/21 23:58:21.164001, 0] ../source3/lib/util.c:791(smb_panic_s3)
Apr 21 23:58:21	nas	smbd[88454]: Bad talloc magic value - wrong talloc version used/mixed
Apr 21 23:58:21	nas	smbd[88454]: [2017/04/21 23:58:21.163801, 0] ../source3/lib/popt_common.c:67(popt_s3_talloc_log_fn)
Apr 19 02:52:15	nas	smbd[75549]: refusing to dump core
Apr 19 02:52:15	nas	smbd[75549]: unable to change to %N.core
Apr 19 02:52:15	nas	smbd[75549]: [2017/04/19 02:52:15.823565, 0] ../source3/lib/dumpcore.c:310(dump_core)
Apr 19 02:52:15	nas	smbd[75549]: #6 0x801cc9b55 <pthread_create+0x925> at /lib/libthr.so.3
Apr 19 02:52:15	nas	smbd[75549]: #5 0x806b1d6f5 <pthreadpool_add_job+0x315> at /usr/local/lib/samba/libmessages-dgm-samba4.so
Apr 19 02:52:15	nas	smbd[75549]: #4 0x806b1e087 <pthreadpool_tevent_job_send+0x207> at /usr/local/lib/samba/libmessages-dgm-samba4.so
Apr 19 02:52:15	nas	smbd[75549]: #3 0x805502171 <_talloc_get_type_abort+0x161> at /usr/local/lib/libtalloc.so.2
Apr 19 02:52:15	nas	smbd[75549]: #2 0x802109a1d <smb_panic+0x13d> at /usr/local/lib/libsamba-util.so.0
Apr 19 02:52:15	nas	smbd[75549]: #1 0x8042552c2 <smb_panic_s3+0x52> at /usr/local/lib/libsmbconf.so.0
Apr 19 02:52:15	nas	smbd[75549]: #0 0x8042553d8 <log_stack_trace+0x28> at /usr/local/lib/libsmbconf.so.0
Apr 19 02:52:15	nas	smbd[75549]: BACKTRACE: 7 stack frames:
Apr 19 02:52:15	nas	smbd[75549]: [2017/04/19 02:52:15.823231, 0] ../source3/lib/util.c:902(log_stack_trace)
Apr 19 02:52:15	nas	smbd[75549]: PANIC (pid 75549): Bad talloc magic value - wrong talloc version used/mixed
Apr 19 02:52:15	nas	smbd[75549]: [2017/04/19 02:52:15.821957, 0] ../source3/lib/util.c:791(smb_panic_s3)
Apr 19 02:52:15	nas	smbd[75549]: Bad talloc magic value - wrong talloc version used/mixed
Apr 19 02:52:15	nas	smbd[75549]: [2017/04/19 02:52:15.821449, 0] ../source3/lib/popt_common.c:67(popt_s3_talloc_log_fn)
Apr 18 19:14:31	nas	smbd[7253]: refusing to dump core
Apr 18 19:14:31	nas	smbd[7253]: unable to change to %N.core
Apr 18 19:14:31	nas	smbd[7253]: [2017/04/18 19:14:31.327696, 0] ../source3/lib/dumpcore.c:310(dump_core)
Apr 18 19:14:31	nas	smbd[7253]: #6 0x801cc9b55 <pthread_create+0x925> at /lib/libthr.so.3
Apr 18 19:14:31	nas	smbd[7253]: #5 0x806b1d6f5 <pthreadpool_add_job+0x315> at /usr/local/lib/samba/libmessages-dgm-samba4.so
Apr 18 19:14:31	nas	smbd[7253]: #4 0x806b1e087 <pthreadpool_tevent_job_send+0x207> at /usr/local/lib/samba/libmessages-dgm-samba4.so
Apr 18 19:14:31	nas	smbd[7253]: #3 0x805502171 <_talloc_get_type_abort+0x161> at /usr/local/lib/libtalloc.so.2
Apr 18 19:14:31	nas	smbd[7253]: #2 0x802109a1d <smb_panic+0x13d> at /usr/local/lib/libsamba-util.so.0
Apr 18 19:14:31	nas	smbd[7253]: #1 0x8042552c2 <smb_panic_s3+0x52> at /usr/local/lib/libsmbconf.so.0
Apr 18 19:14:31	nas	smbd[7253]: #0 0x8042553d8 <log_stack_trace+0x28> at /usr/local/lib/libsmbconf.so.0
Apr 18 19:14:31	nas	smbd[7253]: BACKTRACE: 7 stack frames:
Apr 18 19:14:31	nas	smbd[7253]: [2017/04/18 19:14:31.327618, 0] ../source3/lib/util.c:902(log_stack_trace)
Apr 18 19:14:31	nas	smbd[7253]: PANIC (pid 7253): Bad talloc magic value - wrong talloc version used/mixed
Apr 18 19:14:31	nas	smbd[7253]: [2017/04/18 19:14:31.326769, 0] ../source3/lib/util.c:791(smb_panic_s3)
Apr 18 19:14:31	nas	smbd[7253]: Bad talloc magic value - wrong talloc version used/mixed
Apr 18 19:14:31	nas	smbd[7253]: [2017/04/18 19:14:31.326718, 0] ../source3/lib/popt_common.c:67(popt_s3_talloc_log_fn)
Apr 17 18:57:20	nas	smbd[35248]: refusing to dump core
Apr 17 18:57:20	nas	smbd[35248]: unable to change to %N.core
Apr 17 18:57:20	nas	smbd[35248]: [2017/04/17 18:57:20.525780, 0] ../source3/lib/dumpcore.c:310(dump_core)
Apr 17 18:57:20	nas	smbd[35248]: #6 0x801cc9b55 <pthread_create+0x925> at /lib/libthr.so.3
Apr 17 18:57:20	nas	smbd[35248]: #5 0x806b1d6f5 <pthreadpool_add_job+0x315> at /usr/local/lib/samba/libmessages-dgm-samba4.so
Apr 17 18:57:20	nas	smbd[35248]: #4 0x806b1e087 <pthreadpool_tevent_job_send+0x207> at /usr/local/lib/samba/libmessages-dgm-samba4.so
Apr 17 18:57:20	nas	smbd[35248]: #3 0x805502171 <_talloc_get_type_abort+0x161> at /usr/local/lib/libtalloc.so.2
Apr 17 18:57:20	nas	smbd[35248]: #2 0x802109a1d <smb_panic+0x13d> at /usr/local/lib/libsamba-util.so.0
Apr 17 18:57:20	nas	smbd[35248]: #1 0x8042552c2 <smb_panic_s3+0x52> at /usr/local/lib/libsmbconf.so.0
Apr 17 18:57:20	nas	smbd[35248]: #0 0x8042553d8 <log_stack_trace+0x28> at /usr/local/lib/libsmbconf.so.0
Apr 17 18:57:20	nas	smbd[35248]: BACKTRACE: 7 stack frames:
Apr 17 18:57:20	nas	smbd[35248]: [2017/04/17 18:57:20.525636, 0] ../source3/lib/util.c:902(log_stack_trace)
Apr 17 18:57:20	nas	smbd[35248]: PANIC (pid 35248): Bad talloc magic value - wrong talloc version used/mixed
Apr 17 18:57:20	nas	smbd[35248]: [2017/04/17 18:57:20.524629, 0] ../source3/lib/util.c:791(smb_panic_s3)
Apr 17 18:57:20	nas	smbd[35248]: Bad talloc magic value - wrong talloc version used/mixed
Apr 17 18:57:20	nas	smbd[35248]: [2017/04/17 18:57:20.524286, 0] ../source3/lib/popt_common.c:67(popt_s3_talloc_log_fn)
Apr 16 15:37:44	nas	smbd[6554]: refusing to dump core
Apr 16 15:37:44	nas	smbd[6554]: unable to change to %N.core
Apr 16 15:37:44	nas	smbd[6554]: [2017/04/16 15:37:44.292610, 0] ../source3/lib/dumpcore.c:310(dump_core)
Apr 16 15:37:44	nas	smbd[6554]: #6 0x801cc9b55 <pthread_create+0x925> at /lib/libthr.so.3
Apr 16 15:37:44	nas	smbd[6554]: #5 0x806b1d6f5 <pthreadpool_add_job+0x315> at /usr/local/lib/samba/libmessages-dgm-samba4.so
Apr 16 15:37:44	nas	smbd[6554]: #4 0x806b1e087 <pthreadpool_tevent_job_send+0x207> at /usr/local/lib/samba/libmessages-dgm-samba4.so
Apr 16 15:37:44	nas	smbd[6554]: #3 0x805502171 <_talloc_get_type_abort+0x161> at /usr/local/lib/libtalloc.so.2
Apr 16 15:37:44	nas	smbd[6554]: #2 0x802109a1d <smb_panic+0x13d> at /usr/local/lib/libsamba-util.so.0
Apr 16 15:37:44	nas	smbd[6554]: #1 0x8042552c2 <smb_panic_s3+0x52> at /usr/local/lib/libsmbconf.so.0
Apr 16 15:37:44	nas	smbd[6554]: #0 0x8042553d8 <log_stack_trace+0x28> at /usr/local/lib/libsmbconf.so.0
Apr 16 15:37:44	nas	smbd[6554]: BACKTRACE: 7 stack frames:
Apr 16 15:37:44	nas	smbd[6554]: [2017/04/16 15:37:44.292493, 0] ../source3/lib/util.c:902(log_stack_trace)
Apr 16 15:37:44	nas	smbd[6554]: PANIC (pid 6554): Bad talloc magic value - wrong talloc version used/mixed
Apr 16 15:37:44	nas	smbd[6554]: [2017/04/16 15:37:44.291157, 0] ../source3/lib/util.c:791(smb_panic_s3)
Apr 16 15:37:44	nas	smbd[6554]: Bad talloc magic value - wrong talloc version used/mixed
Apr 16 15:37:44	nas	smbd[6554]: [2017/04/16 15:37:44.290675, 0] ../source3/lib/popt_common.c:67(popt_s3_talloc_log_fn)

Googling wasn't very helpful. One thread did mention updating libtalloc2 fixed it for them.

[netware5]

Attempt to upgrade from 4067 to 4195 - it happened again - after embedded upgrade using web interface the server didn't reboot. The same as explained in my post regarding previous upgrade: viewtopic.php?f=78&t=12243#p76689.

In fact my last three upgrades (from 3948 to 4029, from 4029 to 4067 and from 4067 to 4195) using web interface failed. The symptoms are the same - the following message appeared on the console: "OS halted, press any key to reboot", but pressing any key didn't work. I was forced to press the power button to resolve the issue. Fresh install using LiveUSB has been successful.

[taffeys]

Attempt to upgrade from 4067 to 4195 - it happened again - after embedded upgrade using web interface the server didn't reboot. The same as explained in my post regarding previous upgrade: viewtopic.php?f=78&t=12243#p76689.

In fact my last three upgrades (from 3948 to 4029, from 4029 to 4067 and from 4067 to 4195) using web interface failed. The symptoms are the same - the following message appeared on the console: "OS halted, press any key to reboot", but pressing any key didn't work. I was forced to press the power button to resolve the issue. Fresh install using LiveUSB has been successful.

Yeah, the exact same thing has been happening to me quite frequently on one of my servers. I have given up on 11.0 embedded on a usb dongle as I can't trust a remote upgrade to complete. I paid dearly for SLC usb sticks and I know they aren't the problem. So I am building a new main server on current "real" server hardware that will be a Full RootOnZFS install on a single or mirrored pair of 20GB SSDs. I hope you are able to resolve your issues. Good luck.

[igr4free]

hello, I upgrade 4141 Full ZFSRoot to latest 4195 and understand that a new menu to update next releases from webGUI were added, but still do not appear.

Is normal?
only is show from new install?.

Full Root-On-ZFS now supports upgrades over webgui.

Hi raul, provably the old web bits are still cached, you have to logoff/clear browser cache then login back.

Regards

Hi Jose,

I have the same problem but it has not been fixed by clear browser cache. Any idea?

In my other full install (11.0.0.4.3460) never see this firmware update. and now I upgrade this to 4195

thanks!

[JoseMR]

hello, I upgrade 4141 Full ZFSRoot to latest 4195 and understand that a new menu to update next releases from webGUI were added, but still do not appear.

Is normal?
only is show from new install?.

Full Root-On-ZFS now supports upgrades over webgui.

Hi raul, provably the old web bits are still cached, you have to logoff/clear browser cache then login back.

Regards

Hi Jose,

I have the same problem but it has not been fixed by clear browser cache. Any idea?

In my other full install (11.0.0.4.3460) never see this firmware update. and now I upgrade this to 4195

thanks!

Hello, this cache problem after a Live Firmware upgrade is a known issue, also possibly related to select web browsers, the recommended action after such upgrade is to fully clear the affected browser cache, or even re-login to the account, hope this problem will be addressed soon respectively.

In my other full install (11.0.0.4.3460) never see this firmware update. and now I upgrade this to 4195

This new feature is only for NAS4Free RootOnZFS, and recommended for Developers/Advanced users generally already familiarized with ZFS.

Regards

[igr4free]

hello, I upgrade 4141 Full ZFSRoot to latest 4195 and understand that a new menu to update next releases from webGUI were added, but still do not appear.

Is normal?
only is show from new install?.

Full Root-On-ZFS now supports upgrades over webgui.

Hi raul, provably the old web bits are still cached, you have to logoff/clear browser cache then login back.

Regards

Hi Jose,

I have the same problem but it has not been fixed by clear browser cache. Any idea?

In my other full install (11.0.0.4.3460) never see this firmware update. and now I upgrade this to 4195

thanks!

Hello, this cache problem after a Live Firmware upgrade is a known issue, also possibly related to select web browsers, the recommended action after such upgrade is to fully clear the affected browser cache, or even re-login to the account, hope this problem will be addressed soon respectively.

In my other full install (11.0.0.4.3460) never see this firmware update. and now I upgrade this to 4195

This new feature is only for NAS4Free RootOnZFS, and recommended for Developers/Advanced users generally already familiarized with ZFS.

Regards

ok!! many thanks JoseMR!

[alexey123]

I continue with ipv6
It partially work when ipv6 address defined as auto
But now gui not accessable over ipv6, browser wrote this site cannot be reached
I check

Code: Select all

nas4free: ~# sockstat | grep lighttpd
root     lighttpd   2856  4  tcp4   10.0.0.250:80         *:*
root     lighttpd   2856  5  dgram  -> /var/run/logpriv
root     lighttpd   2856  9  tcp4   10.0.0.250:80         10.0.0.68:52729
root     lighttpd   2507  4  tcp4   *:8080                *:*
root     lighttpd   2507  5  dgram  -> /var/run/logpriv

Socket for lighttpd not open
I check /var/etc/lighttpd.conf

Code: Select all

server.bind = "10.0.0.250"
server.port = "80"
url.access-deny = ( "" )
$HTTP["remoteip"] == "10.0.0.250/24" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
$HTTP["remoteip"] == "127.0.0.1" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
server.upload-dirs = ( "/var/tmp/ftmp", "/var/tmp" )
server.max-request-size = 524288

Oups!!!
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Then I define ipv6 address manually as 2a03:2260:200e::5 / 64 and router as 2a03:2260:200e::1 /64
I have not access to webgui over ip and over ipv6 after reboot
But ssh work
I check

Code: Select all

nas4free: ~# ifconfig re1
re1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
        ether 9c:5c:8e:82:99:b8
        inet 10.0.0.250 netmask 0xffffff00 broadcast 10.0.0.255
        inet6 fe80::9e5c:8eff:fe82:99b8%re1 prefixlen 64 scopeid 0x2
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active

I defined ipv6 as 2a03:2260:200e::5 / 64 - it not present
I try check lighttpd

Code: Select all

nas4free: ~# service lighttpd status
lighttpd is not running.
nas4free: ~# service lighttpd start
Starting lighttpd.
2017-05-02 00:56:57: (network.c.464) can't bind to port: 2a03:2260:200e::5 80 Can't assign requested address
/etc/rc.d/lighttpd: WARNING: failed to start lighttpd

Ok, I set inet manually and start lighttpd

Code: Select all

nas4free: ~# ifconfig re1 inet6 2a03:2260:200e::5/64
nas4free: ~# service lighttpd start
Starting lighttpd.

OK, I have access over ip, but not have ipv6
Address http://[fe80::9e5c:8eff:fe82:99b8]/ cannot be reached, address http://[2a03:2260:200e::5]/ 403 forbidden

Sockstat

Code: Select all

nas4free: ~# sockstat | grep lighttpd
root     lighttpd   3409  4  tcp4   10.0.0.250:80         *:*
root     lighttpd   3409  5  tcp6   2a03:2260:200e::5:80  *:*
root     lighttpd   3409  6  dgram  -> /var/run/logpriv
root     lighttpd   3409  10 tcp4   10.0.0.250:80         10.0.0.68:53086
root     lighttpd   2510  4  tcp4   *:8080                *:*
root     lighttpd   2510  5  dgram  -> /var/run/logpriv

Ifconfig

Code: Select all

nas4free: ~# ifconfig re1
re1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
        ether 9c:5c:8e:82:99:b8
        inet 10.0.0.250 netmask 0xffffff00 broadcast 10.0.0.255
        inet6 fe80::9e5c:8eff:fe82:99b8%re1 prefixlen 64 scopeid 0x2
        inet6 2a03:2260:200e::5 prefixlen 64
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active

/var/etc/lighttpd.conf - part of sockets

Code: Select all

server.bind = "10.0.0.250"
server.port = "80"
$SERVER["socket"] == "[2a03:2260:200e::5]:80" { }
url.access-deny = ( "" )
$HTTP["remoteip"] == "10.0.0.250/24" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
$HTTP["remoteip"] == "2a03:2260:200e::5/64" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
$HTTP["remoteip"] == "127.0.0.1" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
$HTTP["remoteip"] == "::1" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
server.upload-dirs = ( "/var/tmp/ftmp", "/var/tmp" )
server.max-request-size = 524288

[ms49434]

I continue with ipv6
It partially work when ipv6 address defined as auto
But now gui not accessable over ipv6, browser wrote this site cannot be reached
I check

Code: Select all

nas4free: ~# sockstat | grep lighttpd
root     lighttpd   2856  4  tcp4   10.0.0.250:80         *:*
root     lighttpd   2856  5  dgram  -> /var/run/logpriv
root     lighttpd   2856  9  tcp4   10.0.0.250:80         10.0.0.68:52729
root     lighttpd   2507  4  tcp4   *:8080                *:*
root     lighttpd   2507  5  dgram  -> /var/run/logpriv

Socket for lighttpd not open
I check /var/etc/lighttpd.conf

Code: Select all

server.bind = "10.0.0.250"
server.port = "80"
url.access-deny = ( "" )
$HTTP["remoteip"] == "10.0.0.250/24" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
$HTTP["remoteip"] == "127.0.0.1" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
server.upload-dirs = ( "/var/tmp/ftmp", "/var/tmp" )
server.max-request-size = 524288

Oups!!!
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Then I define ipv6 address manually as 2a03:2260:200e::5 / 64 and router as 2a03:2260:200e::1 /64
I have not access to webgui over ip and over ipv6 after reboot
But ssh work
I check

Code: Select all

nas4free: ~# ifconfig re1
re1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
        ether 9c:5c:8e:82:99:b8
        inet 10.0.0.250 netmask 0xffffff00 broadcast 10.0.0.255
        inet6 fe80::9e5c:8eff:fe82:99b8%re1 prefixlen 64 scopeid 0x2
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active

I defined ipv6 as 2a03:2260:200e::5 / 64 - it not present
I try check lighttpd

Code: Select all

nas4free: ~# service lighttpd status
lighttpd is not running.
nas4free: ~# service lighttpd start
Starting lighttpd.
2017-05-02 00:56:57: (network.c.464) can't bind to port: 2a03:2260:200e::5 80 Can't assign requested address
/etc/rc.d/lighttpd: WARNING: failed to start lighttpd

Ok, I set inet manually and start lighttpd

Code: Select all

nas4free: ~# ifconfig re1 inet6 2a03:2260:200e::5/64
nas4free: ~# service lighttpd start
Starting lighttpd.

OK, I have access over ip, but not have ipv6
Address http://[fe80::9e5c:8eff:fe82:99b8]/ cannot be reached, address http://[2a03:2260:200e::5]/ 403 forbidden

Sockstat

Code: Select all

nas4free: ~# sockstat | grep lighttpd
root     lighttpd   3409  4  tcp4   10.0.0.250:80         *:*
root     lighttpd   3409  5  tcp6   2a03:2260:200e::5:80  *:*
root     lighttpd   3409  6  dgram  -> /var/run/logpriv
root     lighttpd   3409  10 tcp4   10.0.0.250:80         10.0.0.68:53086
root     lighttpd   2510  4  tcp4   *:8080                *:*
root     lighttpd   2510  5  dgram  -> /var/run/logpriv

Ifconfig

Code: Select all

nas4free: ~# ifconfig re1
re1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
        ether 9c:5c:8e:82:99:b8
        inet 10.0.0.250 netmask 0xffffff00 broadcast 10.0.0.255
        inet6 fe80::9e5c:8eff:fe82:99b8%re1 prefixlen 64 scopeid 0x2
        inet6 2a03:2260:200e::5 prefixlen 64
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active

/var/etc/lighttpd.conf - part of sockets

Code: Select all

server.bind = "10.0.0.250"
server.port = "80"
$SERVER["socket"] == "[2a03:2260:200e::5]:80" { }
url.access-deny = ( "" )
$HTTP["remoteip"] == "10.0.0.250/24" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
$HTTP["remoteip"] == "2a03:2260:200e::5/64" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
$HTTP["remoteip"] == "127.0.0.1" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
$HTTP["remoteip"] == "::1" {
	url.access-deny = ( "~", ".inc", ".htpasswd" )
}
server.upload-dirs = ( "/var/tmp/ftmp", "/var/tmp" )
server.max-request-size = 524288

sounds like you have a modified Hosts Allow (System > General) and forgotten to add the IPv6 address range.

[alexey123]

sounds like you have a modified Hosts Allow (System > General) and forgotten to add the IPv6 address range.

You right, when I define hostallow I have access to gui


But NAS4Free have fault at ipv6 - when user define static ipv6, server must:
1 define 2 ipv6 addresses - link-local and user defined
2. I think, need allow lighttpd (webgui) socket on link-local subnet
3. Hosts from local networks must be allowed automatically

Am I right ?