This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

A question before deleting source hdd`s

Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

A question before deleting source hdd`s

Post by lindsay »

As i was having a lsi sas/sata controller in IR-Mode i was disovering that my pool (Media) was degraded.
Now both are in IT-Mode as i was booting them up in a windows machine.

Thoug i see it is old firmwares on them (2013) but as i am reading ZFS needs direct access to harddrives the pool will not be degraded beacause of the controllers is in IR-Mode?

Running now rsync from source hdd`s to the pool (Media)
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Top
Post Reply

Return to “ZFS (only!)”