Issue with Intel X520-T2 - No Carrier

[winsork]

Hi, sorry if this has been posted already. I just moved to Nas4Free from FreeNas and both are FreeBSD based. I have problems with networking using VLANs. I have a dual port Intel X520-T2 ethernet based NIC operating in 1 GB speed. VLAN tagging and the NICs worked fine in FreeNas 11. For some reason I cannot get it to work with Nas4Free. The NICs are discovered properly and show up as ix0 and ix1. No cables or ports were changed during move to Nas4Free.

Here's what I see in the ifconfig output. For an unknown reason I have No Carrier. Any help would be appreciated. I am running Nas4Free 11.0.0.4.4490.

ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 00:1b:21:d5:e1:fc
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
ix1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 00:1b:21:d5:e1:fd
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier

vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=303<RXCSUM,TXCSUM,TSO4,TSO6>
ether 00:1b:21:d5:e1:fc
inet 192.168.12.253 netmask 0xffffff00 broadcast 192.168.12.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
vlan: 12 vlanpcp: 0 parent interface: ix0
groups: vlan
vlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=303<RXCSUM,TXCSUM,TSO4,TSO6>
ether 00:1b:21:d5:e1:fd
inet 192.168.13.253 netmask 0xffffff00 broadcast 192.168.13.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
vlan: 13 vlanpcp: 0 parent interface: ix1
groups: vlan