Can someone help me with this?

[haeg65]

As I'm new to this, Can someone help me with this?

@ Disks > Management > HDD Management

Code: Select all

HDD Management
	Device	Device Model	Size	Serial Number	Controller	Controller Model	Standby	Filesystem	Status	Toolbox
	ada0	WDC WD800JD-23JNA1	80.03GB	WD-WMAM93109696	ata0	Intel ICH9 SATA300 controller	5	ZFS Storage Pool	ONLINE  Edit Disk		
	ada1	WDC WD800JD-00LSA0	80.02GB	WD-WMAM9J191679	ata1	Intel ICH9 SATA300 controller	5	ZFS Storage Pool	ONLINE  Edit Disk	

@ Disks > ZFS > Pools > Management

Code: Select all

Overview
	Name	Size	Alloc	Free	Frag	Capacity	Dedup	Health	AltRoot	Toolbox
	DISK01	Unknown	Unknown	Unknown	Unknown	Unknown	Unknown	Unknown	Unknown	Edit Pool		
	DISK02	Unknown	Unknown	Unknown	Unknown	Unknown	Unknown	Unknown	Unknown	Edit Pool		

@ Disks > ZFS > Pools > Virtual Device

Code: Select all

Overview
	Name	Type	Description	Toolbox
	DISK01	stripe	DISK01 	Edit Virtual Device		
	DISK02	stripe	DISK02 	Edit Virtual Device

@ Disks > ZFS > Configuration > Current

Code: Select all

Pools (2)
Name	Size	Alloc	Free	Expandsz	Frag	Dedup	Health	Mount Point	AltRoot
DISK01	Unknown	(Unknown)					Unknown	/mnt/DISK01	-
DISK02	Unknown	(Unknown)					Unknown	/mnt/DISK02	-
Virtual Devices (2)
Name	Type	Pool	Devices
DISK01	stripe	DISK01	/dev/ada0
DISK02	stripe	DISK02	/dev/ada1

@ Disks > ZFS > Configuration > Detected

Code: Select all

Pools (0)
Name	Size	Alloc	Free	Expandsz	Frag	Dedup	Health	Mount Point	AltRoot
Virtual Devices (0)
Name	Type	Pool	Devices
Datasets (0)
Name	Pool	Compression	Dedup	Sync	ACL Inherit	ACL Mode	Canmount	Quota	Readonly	Snapshot Visibility
Volumes (0)
Name	Pool	Size	Blocksize	Sparse	Compression	Dedup	Sync

[sleid]

You have this result because you created 2 vdev with one disk each while you had to create a vdev with the 2 disks and then a pool with this vdev.Note that the choice of the stripe is completely insecure.

[haeg65]

NO. There is 2 disks with 80G HDD as you could see @ Disks > Management > HDD Management.

[sleid]

Overview
Name Type Description Toolbox
DISK01 stripe DISK01 Edit Virtual Device
DISK02 stripe DISK02 Edit Virtual Device

Two vdev


You can build a pool with these 2 vdev but it does not make sense.

[raulfg3]

Please read this guide to understand how ZFS works:
https://forums.freenas.org/index.php?th ... oobs.7775/

[ms49434]

Please let us know what do you want to achieve.
What I can see is that your configuaration is incomplete.

[haeg65]

my nas was working ok one day ....... but now it lost my zpools and i would like to get them back.

[haeg65]

as i have files on the two drives that i need.

[ms49434]

please ssh into your box and report the output of
camcontrol devlist
zdb -C
zpool history

[haeg65]

there is no zpool history ......... sorry.

[haeg65]

it seed on pools located

[haeg65]

dues that mean i have lost my files?

[haeg65]

I"m all good now ........ I got it working again.

[raulfg3]

Please post more info, to know how You solve it. And Mark post as Solved If no need more help.