The NAS4Free Team is pleased to announce the release of version 11.1.0.4.4994 - Atomics
Download build 11.1.0.4.4994
Please Read always the readme_11.1 file
For who wants to know a bit more, here are the
FreeBSD-11.1R-release_notes
and the
FreeBSD-11.1R-hardware_notes
BUILD 11.1.0.4.4994
Changes after release 11.1.0.4.4952
===============================
- Upgrade to FreeBSD 11.1-RELEASE-P5.
- Update translations.
- WebGUI code & framework improvements.
- WebGUI navigation menu design changes.
- Upgrade nano to 2.9.1.
- Upgrade virtualbox-ose to 5.2.2.
- Fix filemanager extended privileges.
Note:
Clear your browser's cache to avoid display issues after upgrade when coming from older release like past 11.0 series.
Make a new backup of your system configuration and store this on safe location, the system config.xml has been upgraded!
Enjoy!
Regards,
The NAS4Free Team
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
-
zoon01
- Developer
- Posts: 724
- Joined: 20 Jun 2012 21:06
- Location: Netherlands
- Contact:
- Status: Offline
NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz
Development system is same system in virtualbox.
Development system is same system in virtualbox.
-
adultery_nas
- Starter
- Posts: 16
- Joined: 12 Apr 2015 05:34
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
Beau-tee-ful!
Works perfectly for me, thank you!
Works perfectly for me, thank you!
-
zoon01
- Developer
- Posts: 724
- Joined: 20 Jun 2012 21:06
- Location: Netherlands
- Contact:
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
you're welcome, nice to read!
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz
Development system is same system in virtualbox.
Development system is same system in virtualbox.
-
almirjakubaitis
- NewUser
- Posts: 14
- Joined: 19 Jun 2016 04:52
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
Great job. Update from 4952 works wonderfully! Thanks!
System specs:
NAS #1
Version: NAS4Free 11.0.0.4 (revision 5019) CPU: Supermicro X8SIL /x64 Xeon(R) CPU L3406 @ 2.27GHz
RAM: 16GB DDR3 ECC UDIMM/ STORAGE: 5x 2TB HTSG raidz1-0 @ zfs
NAS #2
Version: NAS4Free 11.0.0.4 (revision 5019) CPU: Supermicro X8SIL /x64 Xeon(R) CPU X3430 @ 2.40GHz
RAM: 16GB DDR3 ECC RDIMM/ STORAGE: 5x 2TB raidz1-0 @ zfs
NAS #3
Version: NAS4Free 11.0.0.4 (revision 5019) CPU: x64-embedded on Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
RAM: 8GB DDR2 / STORAGE: 1x 8TB Stripe @ zfs
NAS #1
Version: NAS4Free 11.0.0.4 (revision 5019) CPU: Supermicro X8SIL /x64 Xeon(R) CPU L3406 @ 2.27GHz
RAM: 16GB DDR3 ECC UDIMM/ STORAGE: 5x 2TB HTSG raidz1-0 @ zfs
NAS #2
Version: NAS4Free 11.0.0.4 (revision 5019) CPU: Supermicro X8SIL /x64 Xeon(R) CPU X3430 @ 2.40GHz
RAM: 16GB DDR3 ECC RDIMM/ STORAGE: 5x 2TB raidz1-0 @ zfs
NAS #3
Version: NAS4Free 11.0.0.4 (revision 5019) CPU: x64-embedded on Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
RAM: 8GB DDR2 / STORAGE: 1x 8TB Stripe @ zfs
-
BodgeIT
- Starter
- Posts: 74
- Joined: 03 Jul 2012 17:39
- Location: London
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
3 times the charm!
3 perfect embedded updates, no drama...or is it two, hey who's counting!
Thanks for the work, time and effort.
3 perfect embedded updates, no drama...or is it two, hey who's counting!
Thanks for the work, time and effort.
NAS4Free: 11.4.0.4 - (7682) amd64-embedded
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;
Storage: Raidz1(3x Toshiba N300 6TB), Raidz1(3x WD Red 3TB), UFS(1x 1TB) Utility disk, ZFS Cache(64Gb SSD)
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;
Storage: Raidz1(3x Toshiba N300 6TB), Raidz1(3x WD Red 3TB), UFS(1x 1TB) Utility disk, ZFS Cache(64Gb SSD)
-
lindsay
- Forum Moderator
- Posts: 282
- Joined: 23 Jun 2012 09:59
- Location: Steinkjer,Norway
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
WOW i liked the new WebGUI navigation menu design changes 
Working nice here
Working nice here
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T
XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T
XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
-
BodgeIT
- Starter
- Posts: 74
- Joined: 03 Jul 2012 17:39
- Location: London
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
While my upgrade went smoothly, I just noticed that I disk status takes a long time to load.
Pretty sure this wasn't previously the case but not sure how far back.
I have 8 disks on 3 controllers I think. 6 make up two zfs raidz on an IBM M1015, the other two are system boot usb stick and temp store sata.
Not a complaint, just an observation.
Pretty sure this wasn't previously the case but not sure how far back.
I have 8 disks on 3 controllers I think. 6 make up two zfs raidz on an IBM M1015, the other two are system boot usb stick and temp store sata.
Not a complaint, just an observation.
NAS4Free: 11.4.0.4 - (7682) amd64-embedded
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;
Storage: Raidz1(3x Toshiba N300 6TB), Raidz1(3x WD Red 3TB), UFS(1x 1TB) Utility disk, ZFS Cache(64Gb SSD)
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;
Storage: Raidz1(3x Toshiba N300 6TB), Raidz1(3x WD Red 3TB), UFS(1x 1TB) Utility disk, ZFS Cache(64Gb SSD)
-
zoon01
- Developer
- Posts: 724
- Joined: 20 Jun 2012 21:06
- Location: Netherlands
- Contact:
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
will be changed for next releaseBodgeIT wrote: ↑03 Dec 2017 13:29While my upgrade went smoothly, I just noticed that I disk status takes a long time to load.
Pretty sure this wasn't previously the case but not sure how far back.
I have 8 disks on 3 controllers I think. 6 make up two zfs raidz on an IBM M1015, the other two are system boot usb stick and temp store sata.
Not a complaint, just an observation.
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz
Development system is same system in virtualbox.
Development system is same system in virtualbox.
-
BodgeIT
- Starter
- Posts: 74
- Joined: 03 Jul 2012 17:39
- Location: London
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
woohoo! Thanks zoon.will be changed for next release
NAS4Free: 11.4.0.4 - (7682) amd64-embedded
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;
Storage: Raidz1(3x Toshiba N300 6TB), Raidz1(3x WD Red 3TB), UFS(1x 1TB) Utility disk, ZFS Cache(64Gb SSD)
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;
Storage: Raidz1(3x Toshiba N300 6TB), Raidz1(3x WD Red 3TB), UFS(1x 1TB) Utility disk, ZFS Cache(64Gb SSD)
-
zoon01
- Developer
- Posts: 724
- Joined: 20 Jun 2012 21:06
- Location: Netherlands
- Contact:
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
Till than you can download from below and replace the file in usr/local/www to test updated file.
Grab new status_disks.php
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz
Development system is same system in virtualbox.
Development system is same system in virtualbox.
-
BodgeIT
- Starter
- Posts: 74
- Joined: 03 Jul 2012 17:39
- Location: London
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
Works like a charm, didn't notice any delay in loading with the new file.
NAS4Free: 11.4.0.4 - (7682) amd64-embedded
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;
Storage: Raidz1(3x Toshiba N300 6TB), Raidz1(3x WD Red 3TB), UFS(1x 1TB) Utility disk, ZFS Cache(64Gb SSD)
Mobo: Supermicro X9SCL-F, CPU: Xeon E3-1230v2; RAM: Crucial 32GB ECC
System: IBM M1015it SAS controller(SAS2008 v20); Intel Dual 1Gb Server Nic; Thermaltake 1KW PSU;
Storage: Raidz1(3x Toshiba N300 6TB), Raidz1(3x WD Red 3TB), UFS(1x 1TB) Utility disk, ZFS Cache(64Gb SSD)
-
ernie
- Forum Moderator
- Posts: 1458
- Joined: 26 Aug 2012 19:09
- Location: France - Val d'Oise
- Status: Offline
Re: NAS4Free 11.1.0.4.4994 released (FreeBSD 11.1-RELEASE-P5)
Very nice
What will be the next evolution ??
Perhaps a super gift for Christmas
Thanks for dev team
What will be the next evolution ??
Perhaps a super gift for Christmas
Thanks for dev team
NAS 1&2:
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.1.0.4 - Ingva (revision 7743) embedded
NAS1: Xeon E3 1241@3.5GHz, 2HDD@8To/mirror, 1SSD cache, Zlog on mirror, 1 UFS 300 Go
NAS2: G3220@3GHz, 2x3HDD@2To/strip+raidz1, 1SSD cache, Zlog on mirror
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2
Extensions & services:
NAS1: OBI (Plex, BTSync, zrep, rclone, themes), nfs, smb, UPS,
NAS2: OBI (zrep (backup mode), themes)
System: GA-6LXGH(BIOS: R01 04/30/2014) / 16 Go ECC
XigmaNAS 12.1.0.4 - Ingva (revision 7743) embedded
NAS1: Xeon E3 1241@3.5GHz, 2HDD@8To/mirror, 1SSD cache, Zlog on mirror, 1 UFS 300 Go
NAS2: G3220@3GHz, 2x3HDD@2To/strip+raidz1, 1SSD cache, Zlog on mirror
UPS: APC Back-UPS RS 900G
Case : Fractal Design XL R2
Extensions & services:
NAS1: OBI (Plex, BTSync, zrep, rclone, themes), nfs, smb, UPS,
NAS2: OBI (zrep (backup mode), themes)