Hi all,
I am trying to build a HA solution, testing on 2 Virtual Box VMs with this tutorial http://belajarkomputerkita.blogspot.de/ ... th-ha.html
But I only have 1 NIC. Everything works till the point Shut down the master and on the slave import the pool through the GUI. Tab: /ZFS/Configuration/Detected
I alsways get No pool was found. Try to import from on-disk ZFS config.
Can sb. please help me with this? Also see viewtopic.php?f=80&t=13184&p=82350
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
ZFS config import - no pool was found
-
MarcusCaepio
- NewUser
- Posts: 7
- Joined: 19 Dec 2017 08:50
- Status: Offline
-
sleid
- PowerUser
- Posts: 774
- Joined: 23 Jun 2012 07:36
- Location: FRANCE LIMOUSIN CORREZE
- Status: Offline
Re: ZFS config import - no pool was found
Are you sure you have a zfs pool created from a vdev above hast on the master?
12.1.0.4 - Ingva (revision 7852)
FreeBSD 12.1-RELEASE-p12 #0 r368465M: Tue Dec 8 23:25:11 CET 2020
X64-embedded sur Intel(R) Atom(TM) CPU C2750 @ 2.40GHz Boot UEFI
ASRock C2750D4I 2 X 8GB DDR3 ECC
Pool of 2 vdev Raidz1: 3 WDC WD40EFRX + 3 WDC WD40EFRX
FreeBSD 12.1-RELEASE-p12 #0 r368465M: Tue Dec 8 23:25:11 CET 2020
X64-embedded sur Intel(R) Atom(TM) CPU C2750 @ 2.40GHz Boot UEFI
ASRock C2750D4I 2 X 8GB DDR3 ECC
Pool of 2 vdev Raidz1: 3 WDC WD40EFRX + 3 WDC WD40EFRX