Guys,
I am running the latest standalone build (5054). Since some time I have spotted the following warning during boot:
$harvest_ethernet is not set properly - see rc.conf(5).
Unfortunately man pages of BSD and the web did not provide any clue on this.
Any information regarding this will be highly appreciated,
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
$harvest_ethernet is not set properly - see rc.conf(5).
-
fallen2109
- Starter
- Posts: 51
- Joined: 27 Oct 2014 22:38
- Location: The Netherlands
- Status: Offline
$harvest_ethernet is not set properly - see rc.conf(5).
12.0.0.4 - Reticulus (revision 6928)
x64-full on Intel(R) Xeon(R) CPU L5640 @ 2.27GHz (Dual CPU)
Supermicro X8DT3, 48 GB Ram
x64-full on Intel(R) Xeon(R) CPU L5640 @ 2.27GHz (Dual CPU)
Supermicro X8DT3, 48 GB Ram
-
Snufkin
- Advanced User
- Posts: 317
- Joined: 01 Jul 2012 11:27
- Location: Etc/GMT-3 (BSD style)
- Status: Offline
Re: $harvest_ethernet is not set properly - see rc.conf(5).
See below two links, may be they'll shed some light
FreeBSD Kernel Interfaces RANDOM(4)
FreeBSD Tuning and Optimization
XNAS 11.4.0.4 embedded, ASUS P5B-E, Intel DC E6600, 4 GB DDR2
ZFS 2 x HGST HDN726040ALE614, L2ARC PLEXTOR PX-128M5S
ZFS 2 x HGST HDN726040ALE614, L2ARC PLEXTOR PX-128M5S