Hi Nas4Free users,
I have played around with a zvol for testing purposes. After creating it does show up under /dev/zvol/<pool name>/<volume name>.
I have not however found a way to mount and format this from the gui. Only from terminal.
Is this 'missing', or am I missing something very obvious?
Thank you
D.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
ZFS volume mount point from the GUI
-
danzi
- Starter
- Posts: 66
- Joined: 11 Nov 2012 23:24
- Location: Budapest
- Status: Offline
ZFS volume mount point from the GUI
----------------------------------------------
Dell T130 - 32Gb ECC - ESXi 6.7
VM Full Instal - 11.2.0.4 - Omnius (revision 6005)
HP/LSI 9121-4i SAS2008 Pass Through mode
2 x 2Tb ZFS mirror
1 x 3Tb UFS
----------------------------------------------
Dell T130 - 32Gb ECC - ESXi 6.7
VM Full Instal - 11.2.0.4 - Omnius (revision 6005)
HP/LSI 9121-4i SAS2008 Pass Through mode
2 x 2Tb ZFS mirror
1 x 3Tb UFS
----------------------------------------------
-
Princo
- Forum Moderator
- Posts: 1080
- Joined: 15 Jul 2012 01:21
- Location: Berlin, Germany
- Status: Offline
Re: ZFS volume mount point from the GUI
From gui; "Tools > Execute Command"
Meine Antworten beziehen sich immer auf die englischsprachige GUI. ECC-RAM ist Pflicht beim Einsatz von ZFS.