Snapshots and clones could not be deleted from GUI

[MikeMac]

I am testing snapshot functionality in nas4free.

Everyting goes right exept I could not manually delete nor snapshot created from web gui, not clone.
But from command line destroy is working fine.

How I do it (long explanation of step-by step procedure to avoid doubt)

come to Disks|ZFS|Snapshots|Snapshot
press +
choise my pool (Pool) and type snapshot name (testsnap), press add
OK- snapshot created

now let me destroy one:
press red x at snapshot string
dialog appears "Do you really want to delete this snapshot?"
yes
apply - and no result

Tail of zpool history Pool command:
2012-10-08.01:20:45 zfs snapshot Pool@testsnap

let destroy snapshot from CLI
nas4free:~# zfs destroy Pool@testsnap

and see history
nas4free:~# zpool history Pool
...
2012-10-08.01:20:45 zfs snapshot Pool@testsnap
2012-10-08.01:24:18 zfs destroy Pool@testsnap

so now it works

reload of page Disks|ZFS|Snapshots|Snapshot salso shows, that Pool@testsnap disapears.

The same problem exist, then I try to delete clone.
__________________
config

NAS4Free 9.1.0.1 (revision 323) x64-embedded
ALASKA A M I Intel(R) Pentium(R) CPU G2120 @ 3.10GHz 16894MiB RAM

Intel Panther Point USB 3.0 controller PLIP network interface
RTL8169S/8110S/8211 1000BASE-T media interface bus=1 hubaddr=1 port=2
devaddr=2 interface=0 Intel Panther Point USB 2.0 controller bus=2
hubaddr=5 port=1 devaddr=3 interface=0 bus=1 hubaddr=1 port=1
devaddr=2 interface=0

[daoyama]

Hi,

now let me destroy one:
press red x at snapshot string
dialog appears "Do you really want to delete this snapshot?"
yes
apply - and no result

What error did you see on Diagnostics|Log?

[MikeMac]

[/quote]

What error did you see on Diagnostics|Log?[/quote]

Hi, no error at Diagnostics|Log
last messages are from startup sequence
Oct 8 23:15:39 nas4free mt-daapd[2258]: Scanned 451 songs (was 451) in 3 seconds
Oct 8 23:15:39 nas4free mt-daapd[2258]: Updating playlists
Oct 8 23:15:39 nas4free mt-daapd[2258]: Starting playlist scan

I had played additionally and found,that snapshot could be deleted not by pressinx red x, but pressing wrench icon and then action->delete.

After all, this is enough for me.

感謝, Aoyama san

[MikeMac]

SOLVED

I have found a solution. There was something wrong with nas4free configuration. I've done reset to defaults and manually retyped all parameters, have imported all disks and zfs stuff.
Now the following problems gone
- impossible to delete clone or snapshot
- impossible to make firmware upgrade from GUI (no Enable Firmware Upload button)

Before doing this I had played and found, that if I make reset to defaults, I could see Enable Firmware Upload button
But if I've restored config - Enable Firmware Upload button disapears.

If there is need, I could provide both versions of config files - faulty and new, after retypind all params

[daoyama]

If there is need, I could provide both versions of config files - faulty and new, after retypind all params

Please send me both your config.
My email address is aoyama@nas4free.org. You can send to it directly.
Also my email address is located at "Help > License & Credits" in your NAS4Free.
To invoke your mailer, you can simply click at the link of the page.

Thanks,
Daisuke Aoyama