Bonjour,
Est il possible de faire une Full install de N4F sur une CF de 4Go ?
Lorsque je lance la Full install depuis le LiveCD en laissant tous les paramètres par défaut j'obtient une erreur
Comment faire ?
Merci de votre aide
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Full Installation / CF 4Go
Moderators: velivole18, ernie, mtiburs
-
patrice
- Starter
- Posts: 21
- Joined: 06 Jul 2012 11:03
- Location: France
- Status: Offline
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Full Installation / CF 4Go
YES, It's possible.
I have one CF simmilar working on a CF2IDE adapter and my Nas4Free Boot ok,
I have CF2IDE config like "Master" and CD config like "slave" on the same IDE bus, and install from CD work ok on CF.
I have one CF simmilar working on a CF2IDE adapter and my Nas4Free Boot ok,
I have CF2IDE config like "Master" and CD config like "slave" on the same IDE bus, and install from CD work ok on CF.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
patrice
- Starter
- Posts: 21
- Joined: 06 Jul 2012 11:03
- Location: France
- Status: Offline
Re: Full Installation / CF 4Go
Tha's what I have done for the NAS4Free-x64-embedded-9.1.0.1.323 and it works fine
I 'll try the Full install with the 9.1.0.1.344 this evening
Thanks
I 'll try the Full install with the 9.1.0.1.344 this evening
Thanks