This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!



I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Full install on CF 4Go ?

New installs of XigmaNAS.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
patrice
Starter
Starter
Posts: 21
Joined: 06 Jul 2012 11:03
Location: France
Status: Offline

Full install on CF 4Go ?

Post by patrice »

Hello,

How can I install N4F Full version on CF 4Go ?

I want to install miniDLNA next

Tanks for your help.

User avatar
zoon01
Developer
Developer
Posts: 724
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

Re: Full install on CF 4Go ?

Post by zoon01 »

We do never advice to install full on CF or USB/SSD for a longer live of the media.
Embedded is designed for this media

Regards,
zoon01
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

User avatar
alexey123
Moderator
Moderator
Posts: 1469
Joined: 19 Aug 2012 08:22
Location: Israel, Karmiel
Contact:
Status: Offline

Re: Full install on CF 4Go ?

Post by alexey123 »

I was try install ███████7.5-9196 version (brandname broken by KGB :D ) on CF.
It was work, but after 5 mounth new CF dead.
Home12.1.0.4 - Ingva (revision 7091)/ x64-embedded on AMD A8-7600 Radeon R7 A88XM-PLUS/ 16G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Full install on CF 4Go ?

Post by raulfg3 »

Sorry for incorrection, but I have 2 CF that i use in the past 2 years, and I have no write/read problem or dead for me.

I use a IDE2CF to conect to IDE like master, my CD-Reader is conected on the same cable as "slave".

I use one like this:
Ide2CF.jpg

I think that perhaps , brands are important, and CF like this , works very well for years: https://www.alternate.es/html/product/S ... sh/139155/?

PD: This Sandisk is UDMA66 capable, you only need to use 80 wire cable.
You do not have the required permissions to view the files attached to this post.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

armandh
Advanced User
Advanced User
Posts: 398
Joined: 23 Jun 2012 04:15
Location: St Louis County Missouri USA
Status: Offline

Re: Full install on CF 4Go ?

Post by armandh »

with flash memory in any form [cf, usb or direct plug in PATA or SATA]
there are big differences in quality and capability

wear leveling algorithms
extra memory to replace the failed sectors
general quality

I use these [for embedded]
http://www.logicsupply.com/categories/f ... sh_modules
but I would not use any flash for virtual ram [swap]
4 thread 3300 Mhz Intel i3, 1 TB ZFS mirror, available RAM 7.823 Gb, 64 bit NAS4Free 9.1.0.1 rev 573 [88 watts, 48 Mbps]
2 thread 1600 Mhz atom/ion, 1 TB ZFS mirror, available RAM 3.083 Gb, 64 bit NAS4Free-9.1.0.1 rev 573 [27 watts, 35 Mbps]
2 thread 3900 Mhz AMD A6-6400K, 2 TB ZFS Mirror, available RAM 7.557 Gb, 64 bit Nas4Free 9.3.0.2.1771 [89 watts, 68 Mbps]

Post Reply

Return to “Install XigmaNAS”